ページ1に含まれる内容の要旨
Field Guide
Featuring the
®
PresencePLUS P4
GEO
Vision Sensor
ページ2に含まれる内容の要旨
Vision Sensors Overview The P4 GEO uses the same user The PresencePLUS P4 GEO is a interface found in all vision sensor that inspects an area PresencePLUS vision for features in any orientation or sensors. location. Parts to be inspected can travel randomly through the Right-Angle sensing area, saving the cost and Housing Style complexity of hard fixturing. • 360° pattern match • High-speed sensing; can exceed 1500 parts per minute, depending on the inspection The P4 GEO is a self-
ページ3に含まれる内容の要旨
Vision Sensors Overview Remote TEACH PresencePLUS Software Capability Easy to use; requires minimal training After initial setup, the P4 GEO can learn a 360° Part new target without Rotation a PC. Senses moving parts traveling in any position Live Video Feed Tools Menu The P4 GEO provides a live video output, to display the sensing area without a PC. Run Menu Banner Engineering Corp. • Minneapolis, MN USA www.bannerengineering.com • Tel: 763.544.3164 Page 3
ページ4に含まれる内容の要旨
Vision Sensors Features Bi-Color Status Indicators • Green = PASS Red = FAIL • Green = POWER Red = ERROR • Green = READY Yellow = TRIGGER Lens • Standard C-mount Housing In-Line Housing Style • Black anodized aluminum • IP20 environmental rating Right-Angle • Two housing styles available Housing Style Banner Engineering Corp. • Minneapolis, MN USA www.bannerengineering.com • Tel: 763.544.3164 Page 4
ページ5に含まれる内容の要旨
Vision Sensors Features 12-Pin Discrete I/O PC Connection • Remote TEACH • Ethernet • External Trigger • Product Change • 4 user-configurable I/O • RS-232 connections • 10-30V dc NTSC Video Monitor (Optional) • Live images • Holds failed inspection Light Source images • Choose from ring lights, area lights and backlights • Infrared and visible LED options • Strobe option via sensor software • 24V dc; see page 25 Banner Engineering Corp. • Minneapolis, MN USA www.bannerengineering.com • Tel:
ページ6に含まれる内容の要旨
Vision Sensors 360° Pattern Matching PASS PASS FAIL • When the • During Setup, the user identifies a section of • The sensor searches images to find the sensor does not the image containing the target pattern in the template, regardless of orientation. find a matching sensor’s field of view (FOV). • When inspected images contain matching image, the • A template of the pattern is generated for the patterns, the inspected part will “PASS.” inspected part GEO Count tool. will “FAIL.” • The
ページ7に含まれる内容の要旨
Vision Sensors Remote TEACH Inspection Inspection TEACH New Inspection Change Condition • The P4 GEO • When the date code changes, the GEO Count • Configure the • The GEO inspects inspects an ROI tool must be taught the new pattern. P4 GEO to inspect the FOV for the for missing, for the new date pattern of the new • Inspections taught via Remote TEACH are incorrect or by toggling the date code. saved in volatile memory. (If the sensor power “smudged” Remote Teach is cycled, the inspection
ページ8に含まれる内容の要旨
Vision Sensors Correct Container Lid Inspection Application Objective: Verify that dairy product cartons have the correct lids, preventing the potentially costly return of a shipment. Sensors/Components: - P4 GEO P4GR - 8 mm Lens LCF08 - LEDWA80X80M White Area Light - QS30L Trigger Sensor Operation: Barcode reader verifies base container product and recalls proper lid inspection file in the P4 Configuration: GEO. The GEO performs a 360° Geometric Count (GEO Count) GEO Count tool/
ページ9に含まれる内容の要旨
Vision Sensors Correct Container Lid Inspection Application: User Interface Run Screen PASS • Matching pattern passes, regardless of orientation. Tools Screen • Blue lines identify edges. • The red rectangle shows the ROI for the GEO Count tool. Run Screen FAIL • No matching pattern is found. No GEO Count tool ROI is shown. Banner Engineering Corp. • Minneapolis, MN USA www.bannerengineering.com • Tel: 763.544.3164 Page 9
ページ10に含まれる内容の要旨
Vision Sensors Correct Part Verification Application Objective: Verify that the correct parts are ejected from a feeder bowl. As fasteners eject from the feeder bowl, a correct fastener in any orientation must be verified and an incorrect fastener must be rejected. Sensors/Components: - P4 GEO P4GI - 8 mm Lens LCF08 - LEDRA80X80M Visible Red Area Light - D10 Trigger Sensor Operation: Configuration: The P4 GEO will verify the presence of correct fasteners in any GEO Count tool/Test
ページ11に含まれる内容の要旨
Vision Sensors Correct Part Verification Application: User Interface Run Screen PASS • Matching pattern passes, regardless of orientation. Tools Screen • Blue lines identify edges. • The red rectangle shows the ROI for the GEO Count tool. Run Screen FAIL • No matching pattern is found. No GEO Count tool ROI is shown. Banner Engineering Corp. • Minneapolis, MN USA www.bannerengineering.com • Tel: 763.544.3164 Page 11
ページ12に含まれる内容の要旨
Vision Sensors Date Lot Code Application Objective: Inspect the current date and lot codes on film cartons Sensors/Components: - P4 GEO P4GR - 8 mm Lens LCF08 - LEDGR62X62M Green Ring Light - D10 Trigger Sensor Operation: The P4 GEO inspects for missing, incorrect or smudged characters. Cartons that fail are diverted. Configuration: GEO Count tool/Test tool Field of View: 0.8" x 0.5" Working Distance: 2.5" Banner Engineering Corp. • Minneapolis, MN USA www.bannerengineering.com •
ページ13に含まれる内容の要旨
Vision Sensors Date Lot Code Application: User Interface Run Screen PASS • Matching pattern passes, regardless of orientation. Tools Screen • Blue lines identify edges. • The red rectangle shows the ROI for the GEO Count tool. Run Screen FAIL • No matching pattern is found. No GEO Count tool ROI is shown. Banner Engineering Corp. • Minneapolis, MN USA www.bannerengineering.com • Tel: 763.544.3164 Page 13
ページ14に含まれる内容の要旨
Vision Sensors Component Inspection Application Objective: Verify that a button assembly is assembled and oriented correctly before it is mounted in a steering wheel. Sensor Model: - P4 GEO P4GI - 12 mm Lens LCF12 - LEDBA80X80M Blue Area Light - OTB Trigger Operation: After assembling components of a button assembly, the operator Configuration: triggers the P4 GEO to look at three patterns to verify the proper Three GEO Count tools/ placement of the components. Test tool Field
ページ15に含まれる内容の要旨
Vision Sensors Component Inspection Application: User Interface Run Screen PASS • Matching pattern passes, regardless of orientation. Tools Screen • Blue lines identify edges. • The red rectangles show the ROI for each GEO Count tool. Run Screen FAIL • Only two matching patterns are found. Banner Engineering Corp. • Minneapolis, MN USA www.bannerengineering.com • Tel: 763.544.3164 Page 15
ページ16に含まれる内容の要旨
Vision Sensors User Interface: Setup Menu The Setup Menu captures a reference image and sets the trigger options. Trigger Options • Continuous • Manual • External • OFF • Trigger triggers the sensor when Manual is selected Auto Exposure Focus Value • Start sets exposure value • Number between 1 and 255 • Undo reverts to previous based on the contrast of the setting image Exposure • Time Setting and Gain • Used to control the brightness of the image Banner Engineering Corp. • Minneapolis, MN
ページ17に含まれる内容の要旨
Vision Sensors User Interface: Tools Menu The Tools Menu establishes the inspections that a sensor will execute. Location – “Find” • Locate tool • Geometric Find tool (GEO Find) Vision Tools – “Define” • Geometric Count tool Communication (GEO Count) • Communication Analysis – “Report” • Tool labels • Tool parameters • Measure tool • Test tool Quick Teach • Configures inspection parameters based on the reference image Banner Engineering Corp. • Minneapolis, MN USA www.bannerengineering.com
ページ18に含まれる内容の要旨
Vision Sensors User Interface: Teach Menu The Teach Menu sets the judgment tolerances of inspections on a good product. Sample Size • Use the Count option when there is a known sample set size Capture Control • Determine how the information is updated to the PC Teach Counts Display • Tracks the number of • Determines when the samples used in each Teach information displayed on the process PC is updated Start/Stop • Initiates and stops the Teach process Banner Engineering Corp. • Minneapo
ページ19に含まれる内容の要旨
Vision Sensors User Interface: Run Menu The Run Menu monitors the inspections. Pass/Fail Icon Inspection Passed Inspection Failed Results/Navigation Window • Each tool can be expanded to show the data collected • The window helps to quickly troubleshoot and fine-tune inspections Banner Engineering Corp. • Minneapolis, MN USA www.bannerengineering.com • Tel: 763.544.3164 Page 19
ページ20に含まれる内容の要旨
Vision Sensors Basic Kits Basic kits include sensor and the appropriate bracket. To complete a solution kit, add lensing (page 22), lighting (page 23), QD cable and optional monitor. Basic Kits Model P4GRKB Model Description P4GRKB P4 GEO Right-Angle Sensor Basic Kit P4GIKB P4 GEO In-line Sensor Basic Kit Model QD Cables Monitors PPM7 Model Description Model Description P4C06 2 m (6.5') Cable PPM7 7" LCD Wide Screen P4C23 7 m (23') Cable PPM 9" CRT P4C32 10 m (32') Cable Banner Engineering Co
