ページ1に含まれる内容の要旨
®
FriendlyNET GX5-424W/448W/2400W
Smart Gigabit Ethernet Switches
User’s Manual
ページ2に含まれる内容の要旨
FriendlyNET GX5-424W/448W/2400W Smart Gigabit Ethernet Switches User’s Manual Asanté Technologies, Inc. 2223 Old Oakland Road San Jose, CA 95131 SALES 800-662-9686 Home/Office Solutions 800-303-9121 Enterprise Solutions 408-435-8388 TECHNICAL SUPPORT 801-566-8991: Worldwide 801-566-3787: Fax www.asante.com support@asante.com © 2004 Asanté Technologies, Inc. All rights reserved. No part of this document, or any associated artwork, product design, or design concept may be copied or reproduced in w
ページ3に含まれる内容の要旨
Table of Contents Chapter 1 Introduction ................................................................................................................................. 5 Features...................................................................................................................................................... 5 Chapter 2 Unpacking and Installation......................................................................................................... 6 Unpacking.............
ページ4に含まれる内容の要旨
Virtual Local Area Network (VLAN)........................................................................................................... 41 Asanté FriendlyNET GX5-424W/448W/2400W User’s Manual 4
ページ5に含まれる内容の要旨
Chapter 1 Introduction Congratulations on the purchase of your FriendlyNET Smart Gigabit Ethernet switch. These devices can switch segments running at 1000 Mbps Gigabit Ethernet, 100 Mbps Fast Ethernet, and 10 Mbps Ethernet at full wire speeds. The versatile GX5-W uses its on-board CPU to take the complexity out of configuring a workgroup. Using any popular web browser, you’re only a few clicks of the mouse away from enabling high-end services such as trunking, mirroring, virtual LANs (VLANs), a
ページ6に含まれる内容の要旨
Chapter 2 Unpacking and Installation This chapter provides unpacking and installation information for the GX5-424W/448W/2400W switch. Unpacking Open the shipping cartons of the GX5-W switch and carefully unpack its contents. The carton should contain the following items: • One FriendlyNET GX5-424W, GX5-448W, or GX5-2400W switch • One AC power cord, suitable for your area’s electrical power connections • Four rubber feet to be used for desktop placement • Two rack mounting brackets with screws •
ページ7に含まれる内容の要旨
Then, use the screws provided with the equipment rack to mount each switch in the rack. Figure 2. Mount the switch in the rack provided (GX5-2400W example used). Connecting the Network Cable The GX5-424W and GX5-448W switches support 10 Mbps Ethernet or 100 Mbps Fast Ethernet and run both in half and full duplex mode using Category 5 cable. The switches also support 2 port 1000 Mbps Gigabit Ethernet that runs in auto-negotiation mode and 10 Mbps Ethernet or 100 Mbps Fast Ethernet that runs both
ページ8に含まれる内容の要旨
Chapter 3 Identifying External Components This chapter describes the front panel, rear panel, and LED indicators of the switch. GX5-424W Front Panel The figure below shows the front panel of the GX5-424W switch. Figure 3. Front panel of the FriendlyNET GX5-424W switch. LED Indicator Comprehensive LED indicators display the status of the switch and the network (see the following “LED Indicators” chapter). Fast Ethernet Ports (Ports 1-24) These ports support network speeds of either 10 Mbps or 100
ページ9に含まれる内容の要旨
The end node may be a Network Interface Card (NIC), switch, or hub. Gigabit Ethernet Ports (Ports 49–50) The GX5-448W switch is equipped with two Gigabit twisted pair ports, supporting auto-negotiable 10/100/1000 Mbps and auto MDI/MDIX crossover detection function. These two ports can operate in half duplex mode for 10/100 Mbps and full duplex mode for 10/100/1000 Mbps. SFP Mini-GBIC Ports (Ports 51–52) The GX5-448W switch is equipped with 2 SFP Mini-GBIC ports and a supporting optional 1000Base
ページ10に含まれる内容の要旨
Reset to Default This button resets all the settings back to the factory default, including: • IP Address: 192.168.123.253 • Password: admin Note: Be sure to record the settings of your device. All of the settings will be erased when the Reset button is pressed. Asanté FriendlyNET GX5-424W/448W/2400W User’s Manual 10
ページ11に含まれる内容の要旨
Chapter 4 Understanding LED Indicators The front panel LEDs provide instant status feedback, helping to monitor and troubleshoot when needed. GX5-424W LEDs The figure below shows the LED indicators on the GX5-424W switch. Power and System LEDs POWER: Power Indicator On The GX5-424W switch is receiving power. Off The power is off or the power cord has an improper connection. CPU: Management Indicator Blinking The CPU is working or the switch is ready. On The CPU is not working properly; switch mu
ページ12に含まれる内容の要旨
Ports 25–26 Gigabit Status LEDs Link/Activity On The respective port is successfully connected to an Ethernet network. Blinking The port is transmitting or receiving data on the Ethernet network. Off No link. 100 Mbps On The respective port is connected to a 100 Mbps Fast Ethernet network. Off The respective port is connected to a 10 Mbps Ethernet or 1000 Mbps Gigabit Ethernet network. 1000 Mbps On The respective port is connected to a 1000 Mbps Gigabit Ethernet network. Off The respective port
ページ13に含まれる内容の要旨
GX5-448W LEDs The figure below shows the LED indicators on the GX5-448W switch. Power and System LEDs POWER: Power Indicator On The GX5-448W switch is receiving power. Off The power is off or the power cord has an improper connection. CPU: Management Indicator Blinking The CPU is working or the switch is ready. On The CPU is not working properly; switch must be reset. Off The power is off or the power cord has an improper connection. Ports 1–48 10/100 Status LEDs Link/Activity On The respective
ページ14に含まれる内容の要旨
Ports 49–50 Gigabit Status LEDs Link/Activity On The respective port is successfully connected to an Ethernet network. Blinking The port is transmitting or receiving data on the Ethernet network. Off No link. 100 Mbps On The respective port is connected to a 100 Mbps Fast Ethernet network. Off The respective port is connected to a 10 Mbps Ethernet or 1000 Mbps Gigabit Ethernet network. 1000 Mbps On The respective port is connected to a 1000 Mbps Gigabit Ethernet network. Off The respective port
ページ15に含まれる内容の要旨
GX5-2400W LEDs The figure below shows the LED indicators on the GX5-2400W switch. Power and System LEDs POWER: Power Indicator On The GX5-2400W switch is receiving power. Off The power is off or the power cord has an improper connection. CPU: Management Indicator Blinking The CPU is working or the switch is ready. On The CPU is not working properly; switch must be reset. Off The power is off or the power cord has an improper connection. Ports 1–24 Status LEDs Link/Activity On The respective port
ページ16に含まれる内容の要旨
Chapter 5 GX5-W Management Utility for Windows You can configure the GX5-W switch through the Web browser. In the event you cannot remember the switch’s IP address, this handy Windows-based utility lets you quickly discover GX5-224W, GX5-448W, and GX5-2400W switches and lets you make simple changes (password, firmware upgrade, traps). For best performance, use the management screens to configure the switch before placing it into service. Under heavy network traffic, the first priority is to hand
ページ17に含まれる内容の要旨
Double-click or press the Add to monitor list button to select a device from the Discovery List to add to the Monitor List. System word definitions in the Discovery List show: • MAC Address: the device MAC address • IP Address: the current IP address of the device • Protocol Version: the version of the Utility protocol • Subnet Mask: the subnet mask of the device • Gateway: the gateway of the device • Product Name: the device product name • System Name: the device system name configured • Locati
ページ18に含まれる内容の要旨
The symbol represents the trap signal; this symbol disappears after you review and click on the event record. Note: In order to receive trap information, the switch must be configured with Trap IP and Trap Events in the Web browser. These are available in the Trap Setting Menu. Add Item: To add a device to the Monitor List manually, enter the IP Address of the device that you want to monitor. Delete Item: To delete the device in the Monitor List. Device Setting You can set the device by using t
ページ19に含まれる内容の要旨
Firmware Upgrade: Occasionally, Asanté may release new firmware for the GX5-424W, GX5- 448W, or GX5-2400W. To upgrade your current version, fill in the Firmware Upgrade’s dialog boxes and press Start. While the switch is being upgraded, make sure no traffic is in the unit, the power is not turned off, and the Ethernet cable is not disconnected. Wait until the message “Upgrade successful” appears before continuing with other activity. If this is not done properly, the old firmware will be erased,
ページ20に含まれる内容の要旨
Chapter 6 Configuring the Switch You can use any popular web browser to configure the GX5-W switch for your network. A network administrator can manage, control, and monitor the switch from the local LAN. This section indicates how to configure the GX5-W switch to enable its smart functions. Login Before you configure this device, note that when the GX5-W switch is configured through an Ethernet connection, the manager PC must be set on the same IP network. For example, when the default network
