ページ1に含まれる内容の要旨
Corporate Headquarters
GarrettCom, Inc.
47823 Westinghouse Dr.
Fremont, CA 94539-7437
Magnum 6KQE
Phone (510) 438-9071
Fax (510) 438-9072
Managed Edge Switch
Website: http://www.GarrettCom.com
Email: support@garrettcom.com
Hardware
Installation and User Guide
www .. GarrettCom com
www .. GarrettCom com
ページ2に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 Magnum ™ 6KQE Managed Edge Switch Hardware Installation and User Guide Part #: 84-00182Z (Rev. A) Trademarks GarrettCom is a registered trademark and Magnum, Dymec, DynaStar, Personal Switch, Link-Loss-Learn, S-Ring, Convenient Switch and Converter Switch are trademarks of GarrettCom, Inc. Ethernet is a trademark of Xerox Corporation NEBS is a trademark of Telcordia Technologies UL is a registered tra
ページ3に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 Federal Communications Commission Radio Frequency Interference Statement This equipment generates uses and can radiate frequency energy and if not installed and used properly in strict accordance with the manufacturer's instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subp
ページ4に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 Table of Contents Page 1.0 SPECIFICATIONS ............................................................................... 1 1.1 Technical Specifications ...................................................................... 1 1.2 Ordering Information ........................................................................... 4 2.0 INTRODUCTION ...................................................................
ページ5に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 5.1.11 6KQF-xSLCL, LC Singlemode (40km) / RJ45 Module ............ 34 5.1.12 6KQE-2GCU, 1GCU (Gigabit RJ45 Copper ports) (Slot D) ..... 35 5.1.13 6KQE-2GSFP, 1GSFP (Gigabit SFP Fiber ports) (Slot D) ....... 35 5.2 6KQEP-48VDC, Base Unit w/PoE Power-pass-through ................. 36 6.0 TROUBLESHOOTING ...................................................................... 37 6.1 Before Calling for Assistanc
ページ6に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 1.0 SPECIFICATIONS 1.1 Technical Specifications Performance Filtering / Forwarding Rate: Ethernet (10Mb): 14,880 pps Fast Ethernet (100Mb): 148,800 pps Gigabit Ethernet (1000Mb): 1,488,000 pps Switching Processing Type: Store and Forward with IEEE 802.3x full- duplex flow -control, non-blocking Data Rate: 10Mbps, 100Mbps and 1000Mbps Address Table Capa
ページ7に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 1000BASE-SX, full-duplex, multi-mode (50 μm cable) - 550m 1000BASE-LX, full-duplex, multi-mode (50, 62.5 μm cable) - 550m 1000BASE-LX, full-duplex, single-mode (9 μm cable) - 5km 1000BASE-ZX, full duplex, single-mode (9 μm cable) - >70km Fiber Multi-mode connector types supported: Fiber Port, MTRJ-type (plug-in): SFF Fiber multi-mode 100BASE-FX Fiber Port, LC-type (plug-in): SFF Fiber multi-mode 1
ページ8に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 AC Power Supply (Internal) AC Power Connector: IEC-type, male recessed 100-240VAC Power Input, 47 to 63 Hz (auto-ranging) Power Consumption: 20 watts Max. (for a fully loaded fiber model with 2Gb) 15 watts Max. (for 8 port copper and 100Mb fiber model) Dual DC Power Input (Optional) A Dual-Source option is available for the 12VDC, 24VDC, –48VDC, and 125VDC and 250VDC models. This provides for conti
ページ9に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 1.2 Ordering Information MODEL DESCRIPTION Magnum 6KQE-24VDC: Magnum 6KQE Managed Edge Switch, base unit with four 10/100 copper ports. Up to 3 100Mb fiber ports or up to four more 10/100 copper ports (or combinations) may also be configured, and up to 2 Gb ports are optional. Heavy duty metal case, IP53 for environmental protection, no fans. For licensed managed networks software (MNS-6K, RS-Ring and S
ページ10に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 Following modules can be configured in Slot D only (Slot D is Gigabit Fiber only) Magnum 6KQE (Slot D) Port Modules: 6KQE-2GCU adds two auto-negotiating 10/100/1000Mb copper ports 6KQE-1GCU adds one auto-negotiating 10/100/1000Mb copper port 6KQE-2GSFP adds two SFP pluggable open transceiver ports for user selectable SFP Gb transceivers in each 6KQE-1GSFP adds one SFP pluggable open transceiver port for user se
ページ11に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 2.0 INTRODUCTION 2.1 Inspecting the Package and Product Examine the shipping container for obvious damage prior to installing this product; notify the carrier of any damage that you believe occurred during shipment or delivery. Inspect the contents of this package for any signs of damage and ensure that the items listed below are included. This package should contain: 1 Magnum 6KQE Managed Edge Switch, base
ページ12に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 2.2 Product Description - Magnum 6KQE Managed Edge Switch Magnum™ 6KQE Managed Edge Switches provide configurability in an entry- level industrial-grade package. The high performance 6KQE base unit comes with four 10/100 copper ports (which may be either regular or PoE). Up to 3 100Mb fiber ports or up to four more 10/100 copper ports or combinations, may also be configured. In addition, one or two Gb ports ma
ページ13に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 The 6KQE managed switches also provides a PoE option via power –inside PoE base unit (6KQEP-48VDC) on Slot A and allows the users to utilize up to 4-ports of PoE to support 802.3af Powered devices. See details for PoE base unit in sec 5.2. The Power Sourcing Equipment (PSE) is fully compatible with Powered Devices (PD)(e.g wireless access points, IP phones) that comply with the IEEE 802.3af PoE standard. The PoE
ページ14に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 2.2.2 Frame Buffering and Flow Control Magnum 6KQE’s are store-and-forward switches. Each frame (or packet) is loaded into the Switch’s memory and inspected before forwarding can occur. This technique ensures that all forwarded frames are of a valid length and have the correct CRC, i.e., are good packets. This eliminates the propagation of bad packets, enabling all of the available bandwidth to be used for va
ページ15に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 2.3 Managed Network Software for Magnum 6KQE Magnum 6KQE comes with licensed MNS-6K Rel v4.1.4 software or MNS-6K- SECURE Rel v14.1.4, which allow the user to configure the Magnum 6KQE as a Managed Switch and implements security features and other software enabled features. (NOTE: Magnum 6KQE managed switch will work with MNS-6K Rel v4.1.4 firmware or higher version only, or MNS-6K-SECURE v14.1.4 firmware or hig
ページ16に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 2.4 Features and Benefits Managed switching for high performance Ethernet LANs Magnum 6KQE Switches provide unicast non-blocking (all ports can run at full speed at once) performance with standard Managed Network Software. They are typically used in LAN traffic centers with up to 8 100Mb +2 Gigabit ports for backbone connections, where managed network services are desired. Switching services include
ページ17に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 S-Ring and Link Loss Learn for economical high availability using ring topology S-Ring combined with the Link-Loss-Learn feature provides reliable fast recovery of a fault in an economical ring topology combining unmanaged and managed switches. RSTP-2004 for rings and meshes, fastest fault recovery, interoperability RSTP-2004 provides reliable fast recovery from a fault in a redundant LAN, which may inc
ページ18に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 Example 1: Magnum 6KQE Switch for an Industrial Application Equipped with lots of useful features including hardened enclosures, a wide spread of DC power supply options, and extended temperature ratings qualifies the Magnum 6KQE Managed switch for any Industrial factory-floor, traffic control, transportation system, or power utility application. The several MNS-6K software operated features qualifies this mana
ページ19に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 Extended temperature ratings and a variety of options for AC/DC power supplies qualify this managed 6KQE switch for use in non-temperature controlled networks and many other temperature sensitive critical Industrial applications where above normal room temperatures occur while the network is in operation. Full-duplex future proof fiber media can easily connect long distance subnets and provide a stable secure ne
ページ20に含まれる内容の要旨
Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09 other standard managed LAN features to provide a secure and stable network. The 6KQE Managed Fiber with S-ring and Link-Loss-Learn features easily fulfill the redundant requirement with a secure and fast reconfiguration time for cable breakup when set up in a ring topology. The Gigabit port option boosts the bandwidth for high speed to support the peak traffic and minimize congestion. Example 3: In another app
