ページ1に含まれる内容の要旨
1x4 DVI Monitor
Switcher
USER MANUAL
www.gefen.com
ページ2に含まれる内容の要旨
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday through Friday. Write To: Gefen Inc. C/O Customer Service 20600 Nordhoff St Chatsworth, CA 91311 Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 1x4 DVI Monitor Switcher is a trademark of Gefen Inc. © 2007 Gefen Inc., All Rights Reserved
ページ3に含まれる内容の要旨
TABLE OF CONTENTS 1 Introduction 2 Features 3 Panel Desciptions Connecting and Operating the 1x4 DVI Monitor Switcher 4 5 RMT4-IR Installation 6 Specifi cations 7 Warranty
ページ4に含まれる内容の要旨
INTRODUCTION Congratulations on your purchase of the ex•tend•it 1x4 DVI Monitor Switcher. Your com- plete satisfaction is very important to us. Gefen’s line of DVI switches, extenders, and splitters are designed to make your A/V equipment use more comfortable, more productive and less expensive. The 1x4 DVI Monitor Switcher allow access to multiple DVI displays, using a single DVI source while the DVI extender product line can extend the DVI video up to 1640 feet (500 meters). The ex•tend•it
ページ5に含まれる内容の要旨
FEATURES Features • Connects a DVI/HDMI source to multiple DVI or HDMI compatible monitors or projectors • Maintains highest single link video resolution (1920x1200x60hz) • Supports DDWG standard for DVI compliant monitors • Installs in minutes Includes: (1) 1x4 DVI Monitor Switcher (1) 6’ DVI-D cables (m-m) (1) 5VDC Power Supply (1) RMT4-IR 2
ページ6に含まれる内容の要旨
PANEL DESCRIPTIONS DVI out 2 LED Indicators DVI out 1 DVI out 3 DVI out 4 IR Eye Contact DVI In 5v Power Closure IR Extender Port 3
ページ7に含まれる内容の要旨
CONNECTING AND OPERATING THE 1X4 DVI MONITOR SWITCHER How to Connect the 1x4 DVI Monitor Switcher to your devices 1 Connect the supplied DVI cable from the DVI source into the 1x4 DVI Monitor Switcher Input. 2 Connect the cables from your displays (monitor or projector) into the DVI Outputs of the 1x4 DVI Monitor Switcher. 3 Plug the 5v power supply into the DVI Monitor Switcher. 4 Plug the 5v power supply into the wall outlet. How to Operate the 1x4 DVI Monitor Switcher 1 Use th
ページ8に含まれる内容の要旨
RMT4-IR INSTALLATION 1. Remove battery cover from the back of the RMT4-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. 4. Test the RMT4-IR remote by pressing ONLY one button at a time. The indicator light on the remote will fl ash once each time you press a button. WARNING: Do not press multiple buttons simultaneously and do NOT
ページ9に含まれる内容の要旨
SPECIFICATIONS Video Amplifi er Bandwidth ................................................................................. 1.65 GHz Input Video Signal ......................................................................................... 1.2 volts p-p Input DDC Signal .................................................................................... 5 volts p-p (TTL) Single Link Range ......................................................................................... 1920 x 1200
ページ10に含まれる内容の要旨
WARRANTY Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi cations. Equipment that fails under conditions other than those covered will be repai
