ページ1に含まれる内容の要旨
1
ページ2に含まれる内容の要旨
FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communicatio
ページ3に含まれる内容の要旨
HAVE YOUR PROOF OF PURCHASE. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When returning a product, mark the Return Authorization number clearly on the outside of the package and include your original proof of purchase. IN NO EVENT SHALL HAWKING TECHNOLOGY’S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE OR ITS DOCUMENTATION. Hawki
ページ4に含まれる内容の要旨
Introduction 5 Features 7 Package Contents 8 Hardware Description 9 Hardware Installation 11 N-way Process 12 Specifications 13 4
ページ5に含まれる内容の要旨
Thank you for choosing the Hawking HGS5T 5-Port 10/100/1000M Auto-sensing Gigabit Switch. This switch is designed to integrate 10BASE-T, 100BASE-TX and 1000BASE-T networking environments with a standard UTP (unshielded twisted-pair) Ethernet cable connection in your Small Office/Home Office (SOHO) or Home environment. Simply plug in the networking cable and the HGS5T will automatically detect the maximum speed of the network connection to offer smooth network migrations and easy up
ページ6に含まれる内容の要旨
With increased speed and more bandwidth, Gigabit Ethernet is a great solution for reducing network bottlenecks that frequently develop as computers and their buses get faster, and more users generate ever-greater traffic through the use of increasingly advanced applications. Upgrading key components, such as backbones and servers, to Gigabit Ethernet can greatly improve network response times and significantly increase the speed of traffic between your subnets. Gigabit Ethernet
ページ7に含まれる内容の要旨
The H-GS5T is designed for easy installation and high performance and includes the following features: • (5) 1000BASE-T Gigabit Ethernet ports • Supports Auto-Negotiation for 10/100/1000Mbps and duplex mode • Supports Auto-MDIX for each port • Supports Full/Half duplex transfer mode for 10 and 100Mbps • Supports Full duplex transfer mode for 1000Mbps • Full wire speed reception and transmission • Store-and-Forward switching method • Supports 8K of absolute MAC addresses • Suppo
ページ8に含まれる内容の要旨
The complete H-GS5T package consists of: • One H-GS5T 5-Port 10/100/1000M Auto-sensing Gigabit Ethernet Switch • Four Rubber Feet with Adhesive Backing • One External Power Adapter • One User’s Manual Check to make sure that the unit was not damaged during shipping and that no items are missing. If you encounter a problem, please contact your dealer. Please read this manual thoroughly, and follow the installation and operation procedures detailed in this user’s manual. 8
ページ9に含まれる内容の要旨
This chapter describes the front panel, rear panel, and LED indicators of the switch. Front Panel The LED indicators will help you monitor the status of each port and connected segment. The functions of the LED indicators are described on the following page. Rear Panel The rear panel of the switch consists of a DC power connector and five 10/100/1000M auto-negotiation RJ-45 ports. The figure on the previous page shows the rear panel of the switch. 9
ページ10に含まれる内容の要旨
LED Indicators Description Power The indicator is lit when the power is on. Otherwise, it remains unlit. Link/Activity These LEDs are lit when there is a connection (or link) to the desired port. The LEDs blink whenever reception or transmission (i.e., Activity) of data is taking place. Speed These LEDs are Off when there is (10/100/1000M) a 10Mbps connection (or link) to a 10Mbps Ethernet device at the associated port; they are lit Green when there is a 100Mb
ページ11に含まれる内容の要旨
Step 1. Place the H-GS5T on a smooth surface. Step 2. Connect the Power Adapter to the unit. (At this point, do not plug the adapter into the outlet.) Step 3. Connect a server, workstation, or PC to the switch using a standard RJ-45 Ethernet cable. (For best results, use a CAT 5E cable.) Step 4. Repeat Step 3 as necessary for the remaining ports. Also, if needed, another hub/switch can be connected to any port on the unit. Step 5. Ensure that each device is connected prop
ページ12に含まれる内容の要旨
“Auto-negotiation” (N-way) mode automatically sets the best possible bandwidth (10Mbps, 100Mbps, or 1000Mbps) when a connection is established with another network device. Auto-negotiation functions are determined by these set data- transfer rate priorities: a. 1000Base-T Full Duplex (2000Mbps) b. 1000Base-T Half Duplex (1000Mbps) c. 100Base-TX Full Duplex (200 Mbps) d. 100Base-TX Half Duplex (100Mbps) e. 10Base-T Full Duplex (20Mbps) f. 10Base-T Half Duplex (10Mbps) Each po
ページ13に含まれる内容の要旨
IEEE 802.3ab 1000BASE-T IEEE 802.3u 100BASE-TX Standards IEEE 802.3 10BASE-T IEEE 802.3x Flow Control Protocol CSMA/CD Ethernet 10Mbps (Half duplex) 20Mbps (Full duplex) Data Fast Ethernet 100Mbps (Half duplex) Transfer 200Mbps (Full duplex) Rate Gigabit 1000Mbps (Half duplex) Ethernet 2000Mbps (Full duplex) Ethernet 2-Pair UTP CAT 3, 4, 5, 5E Unshielded Twisted Pair (UTP) Cable Fast Ethernet 2-Pair UTP CAT 5, 5E Network Unshielded Twisted Pair Cables (UTP) Cable
ページ14に含まれる内容の要旨
MAC Address HGS5T: 4K Entries Table Modes Half and Full Duplex, auto-negotiation Forwarding Store-and-Forward Mode Flow Control Half duplex: backpressure (IEEE Full duplex: IEEE 802.3x 802.3x) Auto Auto-crossover on each port Crossover Packet Filtering/ Full wire speed Forwarding Rate RAM 437.5K Bytes per device Buffer MAC Address Self-learning, auto aging Learning DC Inputs 12V DC 1A Power 7.5 Watts Consumption Operating 10ºC - 55ºC Temp. 14
ページ15に含まれる内容の要旨
Humidity 0% - 90% RH, non-condensing 187 x 30 x 100mm (W x H x D) Dimensions 7.36” x 1.18” x 3.94” (W x H x D) Certifications FCC Class A, CE Marking Class A, VCCI Class A 15
