ページ1に含まれる内容の要旨
Management and
Configuration Guide
ProCurve Switch 1700-8
ProCurve Switch 1700-24
www.procurve.com
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
ProCurve Series 1700 Switch Management and Configuration Guide
ページ4に含まれる内容の要旨
© Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Windows NT®, Windows®, and MS Windows® are US registered trademarks
ページ5に含まれる内容の要旨
Contents 1 Getting Started Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Getting Documentation From the Web . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Sources for More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 To Set Up and Install the Switch in Your Network . . .
ページ6に含まれる内容の要旨
LACP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20 Enabling LACP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20 Disabling LACP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20 LACP Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22 VLAN Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ7に含まれる内容の要旨
Getting Started 1 Getting Started Introduction This Management and Configuration Guide is intended to support the following switches: ■ ProCurve Switch 1700-8 ■ ProCurve Switch 1700-24 This guide describes how to use the Web browser interface to configure, manage, and monitor switch operation. A troubleshooting chapter is also included. Related Publications Installation and Getting Started Guide. Use the Installation and Get- ting Started Guide shipped with your switch to prepare for and per
ページ8に含まれる内容の要旨
Getting Started Getting Documentation From the Web Getting Documentation From the Web 1. Go to the ProCurve Networking Web site at http://www.procurve.com 2. Click on Technical support. 3. Click on Product manuals (all). 4. Click on the product for which you want to view or download a manual. 3 2 4 1-2 Getting Started
ページ9に含まれる内容の要旨
Getting Started Getting Started Sources for More Information Sources for More Information To Set Up and Install the Switch in Your Network Use the Installation and Getting Started Guide shipped with your switch for the following: ■ Instructions for physically installing the switch in your network. ■ Quickly assigning an IP address, subnet mask, and gateway, set a Manager password, and (optionally) configure other basic features. ■ Interpreting LED behavior. ■ Notes, cautions, and warnings rela
ページ10に含まれる内容の要旨
ページ11に含まれる内容の要旨
Using the ProCurve Web Browser Interface 2 Using the ProCurve Web Browser Interface Overview This switch provides an embedded HTTP Web agent. Using a Web browser you can configure the switch and view statistics to monitor network activity. The Web agent can be accessed by any computer on the network using a standard Web browser (Internet Explorer 5.5 or above). Prior to accessing the switch from a Web browser, be sure you have first performed the following tasks: 1. Configure the switch wit
ページ12に含まれる内容の要旨
Using the ProCurve Web Browser Interface Navigating the Web Browser Interface Device Image Main Menu Information Screen Note The examples in this chapter are based on the 24 port switch. Other than the number of fixed ports, there are no major differences between the 8 port and 24 port switch. Configuration Options Configurable parameters have a dialog box or a drop-down list. Once a configuration change has been made on a page, be sure to click on the Apply button to confirm the new setting
ページ13に含まれる内容の要旨
Using the ProCurve Web Browser Interface Using the ProCurve Web Browser Interface Navigating the Web Browser Interface Note To ensure proper screen refresh, be sure that Internet Explorer is configured as follows: Under the menu “Tools / Internet Options / General / Temporary Internet Files / Settings,” the setting for item “Check for newer versions of stored pages” should be “Every visit to the page”. Panel Display The Web agent displays an image of the switch’s ports. The port will turn gr
ページ14に含まれる内容の要旨
Using the ProCurve Web Browser Interface Navigating the Web Browser Interface Menu Description Page TRUNKS 2-16 Membership Selects ports to group into static trunks. 2-16 Configuration Configures static trunk connection settings. 2-19 LACP Setup Configures Link Aggregation Control Protocol (LACP) on 2-20 the switch. LACP Status Displays aggregation information and LACP port status. 2-22 VLANS 2-24 VLAN Setup Create up to 64 VLANs. 2-24 VLAN Port Config Configures VLAN behavior for individual por
ページ15に含まれる内容の要旨
Using the ProCurve Web Browser Interface Using the ProCurve Web Browser Interface Web Configuration Web Configuration Displaying System Information You can display a complete summary of identity, IP Address, port, Trunk/LACP, and VLAN information for the switch. Field Attributes System Identity � System Name – Name assigned to the switch system. � System Location – Description of the switch location. � System Contact – Contact information assigned to the switch. � Number of Ports – Number of b
ページ16に含まれる内容の要旨
Using the ProCurve Web Browser Interface Web Configuration � Speed/Duplex Status – Shows the current speed and duplex mode. – 10HDX –10FDX – 100HDX – 100FDX – 1000FDX � Flow Control Status – Indicates whether flow control is enabled or disabled. � Auto-negotiation – Shows if auto-negotiation is enabled or disabled. � Frame Type – Either “Tagged” or “All”. “Tagged” means that the port will only send and receive VLAN-tagged packets. When set to “All”, the port will also send and receive untagge
ページ17に含まれる内容の要旨
Using the ProCurve Web Browser Interface Using the ProCurve Web Browser Interface Web Configuration Web - Click System, Information. 2-7
ページ18に含まれる内容の要旨
Using the ProCurve Web Browser Interface Web Configuration Displaying the System Name You can easily identify the system by displaying the device name, location, and contact information. Field Attributes � System Name – A name assigned to the switch system. � System Location – Description of the switch location. � System Contact – The contact name for the switch. Web – Click System, Name. Setting the Switch’s IP Address This section describes how to configure an IP interface for management acc
ページ19に含まれる内容の要旨
Using the ProCurve Web Browser Interface Using the ProCurve Web Browser Interface Web Configuration � Subnet Mask – This mask identifies the host address bits used for routing to specific subnets. (Default: 255.255.255.0) � Gateway IP Address – IP address of the gateway router between this device and management stations that exist on other network segments. (Default: 0.0.0.0) � Management VLAN – ID of the configured VLAN (1-4093, no leading zeroes). By default, all ports on the switch are m
ページ20に含まれる内容の要旨
Using the ProCurve Web Browser Interface Web Configuration Configuring the Logon Password The administrator has write access for all parameters governing the embedded Web agent. You should therefore assign a new administrator password as soon as possible, and store it in a safe place. Field Attributes Change Password � Current Password – Input the current password. (Default is no password) � New Password – Specifies the new user password. (Range: 1-16 characters plain text, case sensitive) �
