Linksys SRW208Gの取扱説明書

デバイスLinksys SRW208Gの取扱説明書

デバイス: Linksys SRW208G
カテゴリ: スイッチ
メーカー: Linksys
サイズ: 4.42 MB
追加した日付: 7/8/2013
ページ数: 86
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスLinksys SRW208Gの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Linksys SRW208Gに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Linksys SRW208Gをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Linksys SRW208Gのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Linksys SRW208Gの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Linksys SRW208G 取扱説明書 - Online PDF
Advertisement
« Page 1 of 86 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Linksys SRW208Gを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Linksys SRW208Gの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

USER GUIDE
BUSINESS SERIES
8-Port 10/100 Ethernet
Switch with Webview
Model: SRW208/SRW208G/SRW208L/SRW208P/SRW208MP

ページ2に含まれる内容の要旨

About This Guide About This Guide Icon Descriptions While reading through the User Guide you may see various icons that call attention to specific items. Below is a description of these icons: NOTE: This check mark indicates that there is a note of interest and is something that you should pay special attention to while using the product. WARNING: This exclamation point indicates that there is a caution or warning and it is something that could damage your property or product. WEB: Thi

ページ3に含まれる内容の要旨

Table of Contents Chapter 1: Introduction 1 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 2: Product Overview 2 SRW208 - Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SRW208G - Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SRW208L - Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ページ4に含まれる内容の要旨

Table of Contents Port Configuration Detail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Port Management > Link Aggregation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Link Aggregation Detail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Port Management > LACP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Port Management > PoE Power Settings . . . . . . . . . . . . . . . . .

ページ5に含まれる内容の要旨

Table of Contents Policy Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 New Class Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 New Aggregate Policer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Spanning Tree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Spanning Tree > STP Status . . . . . . . . . . . . . . . .

ページ6に含まれる内容の要旨

Table of Contents Appendix A: About Gigabit Ethernet and Fiber Optic Cabling 58 Gigabit Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Fiber Optic Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Appendix B: Introduction 59 Startup Menu Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Appendix C: Glossary 61 Appendix D: Specifications 65 Appendix E

ページ7に含まれる内容の要旨

Introduction Chapter 1 Chapter 1: There are features that allow you to expand and grow your network of switches. Link aggregation allows multiple Introduction high-bandwidth trunks between switches to be setup. This also provides a level of reliability in that the system Welcome continues to operate if one of the links break. Spanning Tree (STP), Fast Spanning Tree, and Rapid Spanning Tree This guide covers five product models. (RSTP) allow you to build a mesh of switches increasing t

ページ8に含まれる内容の要旨

Product Overview Chapter 2 Chapter 2: Product Overview Front Panel SRW208 - Front Panel The LEDs and ports are located on the front panel of the SYSTEM (Green) The system LED lights up to Switch. indicate that the Switch is powered on. LINK/ACT (Green) The LINK/ACT LED lights up to indicate a functional network link through the corresponding port (1 through 8, G1, or G2) with an attached device. It flashes to indicate that the Switch is actively sending or receiving Front Panel data ove

ページ9に含まれる内容の要旨

Product Overview Chapter 2 Console The Console port is where you can G1 The mini-GBIC (gigabit interface converter) connect a serial cable to a PC’s serial port for port is a connection point for a mini-GBIC configuration using your PC’s HyperTerminal expansion module, so the Switch can be program. Refer to Chapter 4: Using the uplinked via fiber to another switch. Each Console Interface for Configuration for more MiniGBIC port provides a link to a high-speed information. network segment or

ページ10に含まれる内容の要旨

Product Overview Chapter 2 Gigabit (Orange) The Gigabit LED lights up to indicate a Gigabit connection on the corresponding RJ-45 port (G1 through G2). ETHERNET 1-8 The Switch is equipped with 8 auto-sensing, Ethernet network ports, which use RJ-45 connectors. The Fast Ethernet ports support network speeds of 10Mbps or 100Mbps. They can operate in half and full-duplex modes. Auto-sensing technology enables each port to automatically detect the speed of the device connected to it (10Mbps

ページ11に含まれる内容の要旨

Installation Chapter 3 1U high rack for rack-mount placement, or horizontally on Chapter 3: the wall. Installation Desktop Placement 1. Attach the rubber feet to the recessed areas on the Overview bottom of the Switch. This chapter will explain how to connect network devices 2. Place the Switch on a desktop near an AC power to the Switch. The following diagram shows a typical source. network configuration. 3. Keep enough ventilation space for the Switch and check the environmental rest

ページ12に含まれる内容の要旨

Installation Chapter 3 3. Make sure the brackets are properly attached to the Rack-Mount Placement Switch. When rack-mounting the Switch, please observe the 4. Use the appropriate screws (not included) to securely following guidelines: attach the brackets to your rack. • Elevated Operating Ambient If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to inst

ページ13に含まれる内容の要旨

Installation Chapter 3 Print this page at 100% size, cut along the dotted line and place on the wall to drill precise spacing. sturdy and make sure the location is within reach of Wall-Mount Placement the power outlet. When mounting the Switch on the wall, the Switch should 2. Drill two holes into the wall. Make sure the holes are be mounted horizontally. The front panel should face 3.7 inches (94 mm) apart. You can print the template either up or down. The unit should not be positioned f

ページ14に含まれる内容の要旨

Installation Chapter 3 Hardware Installation To connect network devices to the Switch, follow these instructions: 1. Make sure all the devices you will connect to the Switch are powered off. 2. For 10/100Mbps devices, connect a Category 5 Ethernet network cable to one of the numbered ports on the Switch. For a 1000Mbps device, connect a Category 5e Ethernet network cable to one of the numbered ports on the Switch. 3. Connect the other end to a PC or other network device. 4. Repeat steps

ページ15に含まれる内容の要旨

Configuration Using the Console Interface Chapter 4 4. Select a port to communicate with the switch. Select Chapter 4: COM1, COM2, or TCP/IP. Configuration Using the Console Interface Overview The Switch features a menu-driven console interface for basic configuration of the Switch and management of your network. The Switch can be configured using CLI through the console interface or through a telnet connection. This chapter describes console interface configuration. Configuration can

ページ16に含まれる内容の要旨

Configuration Using the Console Interface Chapter 4 System Configuration Menu Press the Esc button and you will return to the login screen. Use the right arrow button to navigate to Execute System Configuration Menu and press the Enter button to enter the CLI interface. System Configuration Menu options: Configuring the Switch through the 1. System Information Console Interface 2. Management Settings The console screens consist of a series of menus. Each 3. User and Password Settings menu ha

ページ17に含まれる内容の要旨

Configuration Using the Console Interface Chapter 4 Versions Management Settings The Versions screen displays the Boot Version, Software From the Management Settings screen, you can set Serial Version, Loader Version and the Hardware Version. Port Session Configuration, Telnet Session Configuration, or Secure Telnet (SSH) Configuration. Versions Management Settings Boot Version This file runs when the Switch is turned on. It performs power-on diagnostics and loads the operating Serial Por

ページ18に含まれる内容の要旨

Configuration Using the Console Interface Chapter 4 Telnet Configuration SSH Server Configuration SSH Configuration SSH Status On the SSH Configuration screen, you can select SSH The SSH Status screen displays whether the SSH Server is Server Configuration, SSH Server Status, SSH Crypto Key enabled, the RSA and DSA key status, and any open SSH Generation, and SSH Keys Fingerprints. sessions. Select Refresh to update the screen if necessary. To exit, select Quit and press the Enter key. SSH Co

ページ19に含まれる内容の要旨

Configuration Using the Console Interface Chapter 4 NOTE: The Username & Password Settings screen can also be used to set passwords for other users. Security Settings The Security Settings screen enables you to configure security settings on the Switch, as well as generate and display the certificate. SSH Crypto Key Generation SSH Keys Fingerprints On the SSH Keys Fingerprints screen, the RSA and DSA keys will be displayed if they have been generated. Select Refresh to update the screen if

ページ20に含まれる内容の要旨

Configuration Using the Console Interface Chapter 4 SSL Certificate Generation IP Address Configuration The IP Address Settings screen allows you to set the IP Show Certificate information for the Switch. Use the Show Certificate screen to display the internal certificate. IP Address Configuration IP Address The IP Address of the Switch is displayed. (The SSL Certificate default IP address is 192.168.1.254.) Verify that the address you enter is correct and does not conflict with another Dis


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Linksys BUSINESS SERIES SRW224G4 取扱説明書 スイッチ 462
2 Linksys BUSINESS SERIES SRW248G4 取扱説明書 スイッチ 131
3 Linksys CISCO SLM2005 取扱説明書 スイッチ 71
4 Linksys BUSINESS SERIES SRW2016 取扱説明書 スイッチ 54
5 Linksys EF24G2 取扱説明書 スイッチ 1
6 Linksys BUSINESS SERIES SRW2024 取扱説明書 スイッチ 296
7 Linksys EF2H16 取扱説明書 スイッチ 1
8 Linksys EFAH05W V2 取扱説明書 スイッチ 9
9 Linksys EF1324 取扱説明書 スイッチ 2
10 Linksys CISCO SLM2008 取扱説明書 スイッチ 14
11 Linksys EF3508 取扱説明書 スイッチ 1
12 Linksys BUSINESS SERIES SRW2048 取扱説明書 スイッチ 63
13 Linksys EF2H24 取扱説明書 スイッチ 2
14 Linksys EF3512 取扱説明書 スイッチ 1
15 Linksys EFAH16W V2 取扱説明書 スイッチ 10
16 Sony 4-296-436-11 (2) 取扱説明書 スイッチ 0
17 3Com 10/100BASE-TX 取扱説明書 スイッチ 61
18 3Com 2226-SFP 取扱説明書 スイッチ 688
19 3Com 16985ua.bk 取扱説明書 スイッチ 10
20 3Com 10BASE-T 取扱説明書 スイッチ 4