ページ1に含まれる内容の要旨
ProSafe M5300 Switch
Web Management User Guide
350 East Plumeria Drive
San Jose, CA 95134
USA
August 2012
202-10976-01
v1.0
ページ2に含まれる内容の要旨
ProSafe M5300 Switch © NETGEAR, Inc. All rights reserved No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without no
ページ3に含まれる内容の要旨
Contents Chapter 1 Getting Started Switch Management Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Web Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Understanding the User Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Using the Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Interface Naming Convention. . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
ProSafe M5300 Switch NSF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Checkpoint Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Stack Template Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Stack Template Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 PoE (M5300-28G-POE+ and M5300-52G-POE+ Only) . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
ProSafe M5300 Switch LAG Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184 LAG Membership . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186 Chapter 4 Routing Routing Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189 Basic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190 Advanced . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
ProSafe M5300 Switch Chapter 5 Configuring Quality of Service Class of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331 Basic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332 Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333 Differentiated Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339 DiffS
ページ7に含まれる内容の要旨
ProSafe M5300 Switch Chapter 7 Monitoring the System Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .457 Port Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .458 Port Detailed Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .459 EAP Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .466 Cable Test . . .
ページ8に含まれる内容の要旨
ProSafe M5300 Switch Chapter 9 Help Online Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501 Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501 User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502 Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503 Appendix A Default Setting
ページ9に含まれる内容の要旨
1. Getting Started 1 This chapter provides an overview of starting your NETGEAR ProSafe M5300 Switch and accessing the user interface. This chapter contains the following sections: • Switch Management Interface on page 9 • Web Access on page 9 • Understanding the User Interfaces on page 10 • Interface Naming Convention on page 17 Switch Management Interface The switches in the NETGEAR ProSafe M5300 family contain an embedded Web server and management software for managing and monitoring
ページ10に含まれる内容の要旨
ProSafe M5300 Switch Accessing the switch directly from your Web browser displays the login screen shown below. Understanding the User Interfaces ProSafe M5300 software includes a set of comprehensive management functions for configuring and monitoring the system by using one of the following methods: • Web user interface • Simple Network Management Protocol (SNMP) • Command Line Interface (CLI) Each of the standards-based management methods allows you to configure and monitor the components
ページ11に含まれる内容の要旨
ProSafe M5300 Switch Use the following procedures to log on to the Web interface: 1. Open a Web browser and enter the IP address of the switch in the Web browser address field. 2. The default user name is admin, default password is none (no password). Type the user name into the field on the login screen and then click Login. User names and passwords are case sensitive. 3. After the system authenticates you, the System Information page displays. The figure below shows the layout of the Mana
ページ12に含まれる内容の要旨
ProSafe M5300 Switch Page Link Configuration Pages Configuration and Monitoring Options The area directly under the feature links and to the right of the page menu displays the configuration information or status for the page you select. On pages that contain configuration options, you can input information into fields or select options from drop-down menus. Each page contains access to the HTML-based help that explains the fields and configuration options for the page. Each page also conta
ページ13に含まれる内容の要旨
ProSafe M5300 Switch Device View ® The Device View is a Java applet that displays the ports on the switch. This graphic provides an alternate way to navigate to configuration and monitoring options. The graphic also provides information about device ports, current configuration and status, table information, and feature components. The Device View is available from the System Device View page. The port coloring indicates whether a port is currently active. Green indicates that the port is
ページ14に含まれる内容の要旨
ProSafe M5300 Switch Device View System LEDs In addition to the port LEDs, the device view provides a representation of the system LEDs on the left side of the front switch panel. Power/Status LED The power LED is a bicolor LED that serves as an indicator of power and diagnostic status. The following indications are given by the following LED states: • A solid green LED indicates that the power is supplied to the switch and operating normally. • A solid yellow LED indicates that syst
ページ15に含まれる内容の要旨
ProSafe M5300 Switch Device View Navigation Click the port you want to view or configure to see a menu that displays statistics and configuration options. Click the menu option to access the page that contains the configuration or monitoring options. If you click the graphic, but do not click a specific port, the main menu appears. This menu contains the same option as the navigation tabs at the top of the page. Getting Started 15
ページ16に含まれる内容の要旨
ProSafe M5300 Switch Help Page Access Every page contains a link to the online help , which contains information to assist in configuring and managing the switch. The online help pages are context sensitive. For example, if the IP Addressing page is open, the help topic for that page displays if you click Help. User-Defined Fields User-defined fields can contain 1 to 159 characters, unless otherwise noted on the configuration Web page. All characters may be used except for the following (u
ページ17に含まれる内容の要旨
ProSafe M5300 Switch Interface Naming Convention The ProSafe support physical and logical interfaces. Interfaces are identified by their type and the interface number. The physical ports are gigabit interfaces and are numbered on the front panel. You configure the logical interfaces by using the software. Table 2 describes the naming convention for all interfaces available on the switch. Table 2. Naming Conventions for Interfaces Interface Description Example Physical The physical ports are
ページ18に含まれる内容の要旨
ProSafe M5300 Switch Getting Started 18
ページ19に含まれる内容の要旨
2. Configuring System Information 2 Use the features in the System tab to define the switch’s relationship to its environment. The System tab contains links to the following features: • Management on page 19 • Device View (See Device View on page 12) • License on page 43 • Services on page 45 • Stacking on page 68 • PoE (M5300-28G-POE+ and M5300-52G-POE+ Only) on page 82 • SNMP on page 87 • LLDP on page 93 • ISDP on page 109 • Timer Schedule on page 114 Management This section describes
ページ20に含まれる内容の要旨
ProSafe M5300 Switch System Information After a successful login, the System Information page displays. Use this page to configure and view general device information. To display the System Information page, click System Management System Information. A screen similar to the following displays. Configuring System Information 20
