PAC の取扱説明書

ページ1に含まれる内容の要旨

TATO
JBL Amplifier Turn-On Interface for
Toyota CANbus Vehicles
Class 2 EOD J1850 CRC
VPW Arbitration J1850 Class 2 Class 2 J1850 Class 2
100011101111001001101100
100011101111001001101100 111010000110110111001100 111010000110110111001100
The TATO is designed to control the power and audio levels of the factory installed
JBL amplifier allowing the OEM radio to be removed and replaced with an aftermarket
stereo.
Installation:
Note: BEFORE REMOVING THE FACTORY RADIO: BALANCE AND FADE IT TO THE C

ページ2に含まれる内容の要旨

Adjusting Volume Output: The dB gain adjustments are as follows: When initially connecting the TATO to the vehicle the max output might not meet that of the factory radio. If the volume is low you can adjust the output using the dip switches on the side of the module. It is rec- ommended to use a 4 volt RMS capable aftermarket radio. When adjusting the gain output it is recom- mended to start with the plus 7dB setting and working your way down. Note: It may take up to 10 seconds before the