ページ1に含まれる内容の要旨
CPU Switch Unit
Before attempting to connect or operate this product,
Model No. WJ-MPS850
please read these instructions carefully and save this manual for future use.
For U.S.A
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15
CAUTION
of the FCC Rules. These limits are designed to provide rea-
RISK OF ELECTRIC SHOCK
sonable protection against harmful interference when the
DO NOT OPEN
equipment is operated in a commercial e
ページ2に含まれる内容の要旨
General If this unit decides on a CPU change over, it must first The CPU Switch Unit is designed to switch over the deactivate the previous CPU, and wake up the standby redundant (Duplicate) CPU system, automatically or CPU to be active later. Therefore this unit has a CPU manually for maintenance reasons. This unit will always reset function and can restart the CPU in the standby diagnose both CPUs condition and judge which CPU mode. Also, this unit will indicate the target CPU to be must be
ページ3に含まれる内容の要旨
CPU Switch Unit WJ-MPS850 CPU DIAGNOSTIC-A A CPU MODE INDICATION RESET A AUTO B CPU DIAGNOSTIC-B B RESET q Operate Indicator (OPERATE) r CPU Diagnostic Indicators (CPU DIAGNOSTIC) Lights to indicate that the self-diagnosis is being Is on when the power of the WJ-MPS850 CPU run. Switch Unit is turned on. t Controller Ports [SYSTEM CONTROLLER Note: The power switch of the CPU Switch Unit is (RS-485)] located underneath the front panel. These ports are provided for controlling the 850 Remove the fr
ページ4に含まれる内容の要旨
Connections Connection with the Main CPUs Connect with the Main CPUs A and B as shown in A CPU the figure. ETHERNET Central Processing Unit • Connect RS-485 modular cables between controller GYGTEM CAMERA CONTROLLER CROSS POINT OSD SYSYTEM (RS–485) CONTROLLER ports (RS-485) of the CPUs and controller ports (RS- DATA 6 DATA 5 DATA 4 DATA 3 DATA 2 DATA 1 AC IN ( – ) PARALLEL PERIFERAL INTERFACE RS 232C REDUNDANT SATELLITE CPU MODE 485) of this unit. 3 2 1 NO YES STANDALONE SATELLITE S
ページ5に含まれる内容の要旨
Operations On the other hand, the CPU Switch Unit will switch, Power on CPU Switch Unit first. The power switch of the B CPU as the active CPU. this unit is located underneath the front panel. The "B" button will be on and the "AUTO" button will Remove the front panel by removing the 4 screws be blinking. This blinking means that a CPU switch on the panel. has occurred in the past days. The CPU Switch Unit has a default setting: the A In the blinking mode, even if B CPU is corrupted CPU is th
ページ6に含まれる内容の要旨
Specifications Power Supply: 120 V AC 60 Hz Power Consumption: 11 W System Controller Ports: RS-485; 6-conductor modular jack (x36) Peripheral Interface Ports: RS-232C; 9-pin D-sub connector (x9) Diagnostic Input Ports: 9-pin D-sub connector (x2) Ambient Operating Temperature: –10°C - +50°C (14°F - 122°F) Ambient Operating Humidity: Less than 90 % Dimensions: 430 mm (W) x 132 mm (H) x 350 mm (D) 16-15/16” (W) x 5-3/16” (H) x 13-3/4” (D) Weight: 11 kg (24.2 lbs) Weight and dimensions indicated
ページ7に含まれる内容の要旨
Panasonic Security and Digital Imaging Company Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, A Division of Matsushita Electric Corporation of America Ontario, L4W 2T3 Canada (905)624-5010 Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Panasonic Sales Company Regional Offices: Division of Matsushita Electric of Puerto Rico Inc. Northeast: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Ave. 65 de Infanteria. Km. 9.5 Southern: 1225 Northbrook Parkway, Suite 1-160
