Allied Telesis SB251-01の取扱説明書

ページ1に含まれる内容の要旨

Patch Release Note
Patch SB251-01
For SwitchBlade 4000 Series Switches and
AT-9800 Series Switches
Introduction
This patch release note lists the issues addressed and enhancements made in
patch SB251-01 for Software Release 2.5.1 on existing models of SwitchBlade
4000 Series Switches. Patch file details are listed in Table 1.
Table 1: Patch file details for Patch SB251-01.
sb-251.rez
Base Software Release File
15-Jan-2003
Patch Release Date
sb251-01.paz
Compressed Patch File Name
71828 bytes

ページ2に含まれる内容の要旨

2 Patch Release Note Features in SB251-01 PCR: 02555 Module: SWI Network affecting: No Layer 2 filtering is now working correctly. PCR: 02561 Module: SWI Network affecting: No 32 bit counters now only show 8 bit contents. PCR: 02563 Module: SWI Network affecting: No The IPM (Layer 3 Multicasting table) now updates correctly to add or delete the ingress linecard to control blade ports, and the control blade to egress linecard ports when updating forwarding. PCR: 02568 Module: CORE Network affec

ページ3に含まれる内容の要旨

Patch SB251-01 For SwitchBlade 4000 Series Switches and AT-9800 Series Switches 3  The number of user-specified protocols in the PROTOCOL parameter has been increased from three to seven.  The minimum value of the IPXDADDRESS parameter has been decreased from 10000000 to 00000001. PCR: 03006 Module: SWI Network affecting: No An issue which sometimes resulted in a broadcast storm within the internal ports on the SwitchBlade, a reduction in bandwidth, and a loss of pinging has been resolved.

ページ4に含まれる内容の要旨

4 Patch Release Note Patch SB251-01 for Software Release 2.5.1 C613-10361-00 REV A