ページ1に含まれる内容の要旨
IPS-2000 Series User’s manual/使用手冊
V1.1
www.artdio.com.tw
ページ2に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 Safety Instructions ˙Do not attempt to service the product yourself. Any servicing of this product should be referred to qualified service personnel. ˙To avoid electrical shock, do not put your finger, pin, wire, or any other metal objects into vents and gaps. ˙To avoid accidental fire or electrical shock, do not twist power cord or place it under heavy objects. ˙The product should be connected to a power supply of the
ページ3に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 contents 1. PRODUCT INTRODUCTION.............................................................................................................................................7 2. QUICK INSTALLATION GUIDE.......................................................................................................................................8 2.1 INTERFACE DESCRIPTION (SUITABLE FOR IPS-2000 PLUS)........................................
ページ4に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 3.6.7 System Auth .............................................................................................................................................................39 3.7 SAVE CHANGE..................................................................................................................................................................40 3.8 REBOOT ...................................................................
ページ5に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 目 錄 1. 產品介紹 ..............................................................................................................................................................................47 1.1 包裝內容........................................................................................................................................................................47 1.2 產品特性.........................................................
ページ6に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 3.5.7 RPort Setting ...........................................................................................................................................................75 3.5.8 Other Setting ...........................................................................................................................................................75 3.6 OTHERS（其他設定）................................................................
ページ7に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 1. Product Introduction The product is designed for flexibility to be placed flat or vertically, to customize the different needs of users. Vertical Panel Image Flat Panel Image 7
ページ8に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 2. Quick Installation Guide 2.1 Interface Description (suitable for IPS-2000 Plus) 8
ページ9に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 2.2 Interface Description (suitable for IPS-2000NPlus) 9
ページ10に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 2.3 Network Installation and Setting Network Setting (The image shown is IPS-2000 Series network setting, it could be used by general users.) Proxy Internet PSTN PSTN IPS-2000Series Ethernet Cable PC phone user 10
ページ11に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 Environment Setting ISP Environment Suggestion This setting is used only when your environment setting is using an IP router IP Router Setting and the router only serve as a network interface, which is similar to a “Hub＂ connection. IPS-2000 Series network setting with a Router is shown below: Connect the RJ-45 cable to the WAN (LAN2) port on IPS-2000 Series, and then connect the other RJ-45 to the LAN port of IP Router.
ページ12に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 Environment Setting ISP Environment Suggestions This is to connect IPS-2000 Series between ADSL modem and PC, suitable Network Setting without for ADSL PPPoE (dynamic IP) user who has only 1 PC. Note ISP must IP Router provide more than 1 dynamic IP. (General setting) Connect the RJ-45 to the WAN (LAN2) port on your IPS-2000 series, connect the other RJ-45 to your ADSL modem. The other LAN port on IPS-2000 series could be
ページ13に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 2.4 System Registration and log on 2.4.1 Status LED Indicator Explanation (suitable for IPS-2000 Plus) 2.4.2 Status LED Indicator Explanation (suitable for IPS-2000NPlus) Status LED Indicator Explanation Power ON(Red) Red light On, power source is connected Line/FXO(Blue) Blue light flash, PSTN line is in use Tel/FXS（Blue） Blue light flash, Telephone line is in use SIP/Reg (Blue) Bl
ページ14に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 [Step 2 Network Setting] IPS-2000 Series support the IVR (Interactive Voice Response) system that allows the customers to configure the IPS-2000 Series easily. Please follow the instruction below to set IP numbers. 1）Set IP, press #112 XXX*XXX*XXX*XXX# 2）Set Mask IP, press #113 XXX*XXX*XXX*XXX# 3）Set Gateway IP, press #114 XXX*XXX*XXX*XXX# 4）Set DNS Server, press #115 XXX*XXX*XXX*XXX# Example: Network default mode of IPS
ページ15に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 pull-down menu and select Service Domain, fill in the blanks at Service Domain Setting according to related account information. You can configure the IPS-2000 Series as shown below. For example, the domain registration of newtw1.a-voize.com with the port: 5070. After the setting is finished, press submit key below to save the setting and press save change on the left to store all the settings. Press “save＂ button and IPS-2
ページ16に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 Check WAN port IP #126# ◆Check the current IPS-2000 Series WAN port IP address address Check Firmware #128# Version #111# ◆Change to DHCP client setting Set DHCP client Set Static IP #112XXX*XXX*XXX*XXX# ◆every X represent a number #113XXX*XXX*XXX*XXX# Set Mask IP Set Gateway IP #114XXX*XXX*XXX*XXX# #115XXX*XXX*XXX*XXX# Set DNS Server #130+[1-8]# ◆(1)G711 u-Law, (2)G711 a-Law, (3)G723.1, Set Co
ページ17に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 Set the Auto Answer function in the Phone Setting to ON. • Inbound Operation: You may directly get through from PSTN external cable, and a second dialing ring will come after several rings (IPS-2000 Series will follow the vibrating ring) before it transfers to the phone number you need. If you have set PIN CODE, you may hear some vibrating rings after getting through (IPS-2000 Series will follow the vibrating ring). Then some
ページ18に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 3. Web Configuration Page Pick up the handset or press the speaker phone key, then dial #126# to hear your current IP address from the IPS-2000 Series. Enter the IP address into your Internet browser URL address as “http://IP address:9999＂to enter configuration web page, input user name and password, the default user name is “root＂ and password is “test＂, click “Login＂ button you will be able to get into the configuration web pa
ページ19に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 Caller ID Setting Field Name Description Select display of caller ID, 4 options available, by FSK or DTMF Caller ID Select using single call ID or not Single Caller ID Set display time for calls. CID Without Time 3.2.2 Phone Book To configure the settings of the phone book and the speed dial. PHONE Book Field Name Description Click to delete selected content. Delete Selected Click to delete all contents. Delete Al
ページ20に含まれる内容の要旨
IPS-2000 Series User’s Manual/使用手冊 Auto Answer Field Name Description Auto Answer Select this function will enable second dialing if has a call. Auto Answer Auto answer ring time. Set how many rings to get into the silence mode for Counter 2nd dialing PIN Code Enabled Select to use password for 2nd dialing. PIN Code Set the password for 2nd dialing. 3.2.4 Dial Plan Setting To configure the settings of the Dial Plan. (* Please refer to FAQ for details)
