ページ1に含まれる内容の要旨
User’s Manual for the
Two-Line Speakerphone 902
Fold open this manual for information about
this telephone’s installation and operation.
Please read Part 1 — Important Product
Information, included in this package.
Part 2
© 1998 Philips Consumer Communications, L.P. All rights reserved.
Printed in Mexico. 848236212 Issue 1AT&T
IN CASE OF DIFFICULT Y
• Try calling the number you want Problems With Line Status Lights Telephone Does Not Ring
to enter into memory. When the • Make sure all plugs are
ページ2に含まれる内容の要旨
I N S TA L L AT I O N NOTE: This telephone requires a i n cluded). If you are connecting 2 Turn the telephone upside down. 2-line modular jack or two separate o n ly Line 1 or only Line 2, use two 3 Remove the base by pressing the one-line modular jacks to use this b at t e ri e s , as indicated on the bottom of tabs located on the top of the base. unit as a two-line phone. the phone. If you are connecting both 4 Press down on tab on battery l i n e s , use four ba t t e ri e s . NOTE: To use bo
ページ3に含まれる内容の要旨
I N S TA L L AT I O N c o n t i n u e d Table 7 Confirm Lines 1 and 2. 5 Connect the line cord(s) to Press and call one of your modular wall jack(s) and mount 1 Remove the base. telephone numbers. If you hear a phone onto wall jack. 2 Connect line cord(s) to tele p h o n e. busy signal, Line 1 is the number • If you have a two-line jack, • If you have a two-line jack, you called. If Line 2 rings, it is the plug the free end of the line use only the line cord with the number you called. cord int
ページ4に含まれる内容の要旨
TELEPHONE OPERAT I O N Making a Call—Handset N OT E : If the Line Status lights are To release Hold, press the appropri- not working properly, try installing ate line button, then lift the handset Press or and then lift new batteries. from the cradle the handset. You can dial your call — OR — manually or use the memory dialing Redial Press feature. — OR — The telephone always stores in mem- Lift the handset of an extension Answering a Call—Handset ory the last number you called. The phone of th
ページ5に含まれる内容の要旨
TELEPHONE OPERAT I O N c o n t i n u e d Conference Call Options signals for access to telephone Press and release (the red banking or long-distance services. To place a conference call on Hold: Mute light goes on) to talk privately with someone else in the room with- EXAMPLE: 1. Press to hold both lines. out the person on the phone hearing 1 Dial a number. 2. Press to release Hold and you. Press and release again continue your conference call. 2 Press and release ; all keys (the Mute light goe
ページ6に含まれる内容の要旨
M E M O RY Memory Features 5 P ress the memory button w h e re yo u Combine Manual and Memory a re storing the n u m b e r. You will Dialing Capacity: This telephone can store hear two beeps to conf i rm that the Instead of using two memory loca- up to 16 telephone numbers, up to 24 number has been stored corre c t ly. t i o n s , you might choose to store only digits long. p a rt of a long n u m b e r. You can use 6 Hang up or press after the One-Touch Dialing: The 16 spaces m e m o ry dialing
