ページ1に含まれる内容の要旨
OWNER’S
INSTRUCTION MANUAL
CALLER ID TYPE II
MULTI-FEATURE TELEPHONE
MODEL 9225
1
ページ2に含まれる内容の要旨
THANK YOU FOR PURCHASING THE 9225 CALLER ID TYPE II MULTI-FEATURE TELEPHONE We want you to know all about your new Telephone, how to install it, the features it provides, and the services you can expect from its use. We have included this informa- tion in your Owner’s Instruction Manual. PLEASE READ BEFORE INSTALLING AND USING YOUR NEW TELEPHONE EQUIPMENT. 2
ページ3に含まれる内容の要旨
Table Of Contents IMPORTANT SAFETY INSTRUCTIONS ................................ 5 TELEPHONE PART IDENTIFICATION ................................. 7 INSTALLATION .......................................................................... 9 BOX CONTENTS .............................................................................................................. 9 BATTERY INSTALLATION ............................................................................................. 9 DIALING MODE .....
ページ4に含まれる内容の要旨
MESSAGE BUTTON ...................................................................................................... 16 CLEAR MSG BUTTON .................................................................................................. 17 CONTRAST BUTTON .................................................................................................... 17 REPROGRAMMING NETWORK SERVICE BUTTONS ............................................. 17 SPEAKER BUTTON ......................................
ページ5に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Always follow basic safety precautions when using your telephone equipment to reduce the risk of fire, electrical shock, and injury. 1. Read and understand all instructions in the Owner’s Instruction Manual. 2. Read all warnings and follow all instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners. 4. Do not use the telephone near water. For example, do not
ページ6に含まれる内容の要旨
14. Unplug the telephone from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the line cord is frayed or plugs damaged. • If liquid has been spilled into the telephone. • If the telephone has been exposed to rain or water. • If the telephone does not operate properly by following the operating instructions. (Adjust only those controls covered by the operating instructions. Improper adjustment of other controls may result in damage and
ページ7に含まれる内容の要旨
TELEPHONE PART IDENTIFICATION 1 Headset Button 14 Clear Message Button 2 Call Waiting Off Button 15 Enter Button 3 Pause Button 16 LCD Contrast Button 4 Flash Button 17 Memory Buttons 5 Mute Button 18 Hold Button 6 End Call Button 19 Line 1 Button 7 Call Forward On/Off Button 20 Line 2 Button 8 Hookswitch 21 Conference Button 9 Direction Buttons 22 Redial Button 10 Menu Button 23 Speaker On/Off Button 11 Delete Button 24 Shift Button 12 Save Button 25 Volume Up Button 13 Message Button 26 Volume
ページ8に含まれる内容の要旨
TELEPHONE PART IDENTIFICATION Back and Side 1 D a t a J a c k ( L in e 2 /D a t a J a c k ) 2 R in ge r 1 V o lu m e S w it c h 3 R in ge r 2 V o lu m e S w it c h 4 L in e 1 /2 J a c k 5 A C A d a p t e r J a c k 6 H e a d s e t J a c k 7 H a n d s e t J a c k 8
ページ9に含まれる内容の要旨
INSTALLATION BOX CONTENTS Verify that the following items are in the box. • Telephone • Handset • Handset Cord • Line Cord • 3 AA Batteries • Power Adapter • Instruction Manual BATTERY INSTALLATION The 9225 telephone requires 3 AA size 1.5 V batteries for the LCD display. To install the batteries, follow the steps below: 1. Remove the battery cover. The cover is located underneath your phone. 2. Insert 3 AA size 1.5 V batteries. Be careful to observe the polarity markings in the battery compa
ページ10に含まれる内容の要旨
DESK MOUNT 1. Press in the two areas shown below to release the desk stand. 2. Rotate the desk stand into the desk mounting position as shown below. 3. Connect the power adapter and the line cord. See Steps 2 and 3 in the DESK MOUNT instructions. 4. Plug the coiled cord into the handset, and then plug the other end of the cord into the handset jack. 5. Place the handset on the base. ANSWERING MACHINE 1. Connect the LINE jack of the answering machine to the wall telephone jack. 2. Connect the Tel
ページ11に含まれる内容の要旨
UNIT SETUP Use MENU to enter the setup screen. 1. Press MENU. PHONE BOOK appears on the display. The Phone Book is covered in a later section. 2. Press . When CALL WAITING appears, press ENTER. Then use to toggle this feature ON or OFF. If this is set to OFF, Caller ID information will not be displayed for a Call Waiting call. Press ENTER to exit. 3. Press . When DATE FORMAT appears, press ENTER. Then use to select either Month-Day (MM-DD) and Day-Month (DD-MM). Press ENTER to exit. 4.
ページ12に含まれる内容の要旨
9. Press MENU. Then press or until SET CONTRAST appears. Press ENTER to set the contrast. Use or to set the contrast. There are 8 choices available. Press ENTER to exit to idle screen. 10. Press MENU. Then press or until BACK LIGHT appears. Press ENTER. The display will show BACK LIGHT TIME. Press ENTER. The display will show the back light time. Use or to select between 30 sec, 20 sec, 10 sec or OFF. Press ENTER. The display will show BACK LIGHT TIME. Press or . The displ
ページ13に含まれる内容の要旨
BASIC OPERATION RECEIVING A PHONE CALL When the phone rings, lift the handset, press HEADSET or press SPEAKER to begin your conversation. You can adjust the volume of the caller’s voice by pressing the Volume Buttons on the base of the telephone. PLACING A PHONE CALL 1. Lift the handset, press HEADSET or press SPEAKER and wait for a dial tone. The 9225 selects Line 1 by default. To place a call on Line 2, press LINE2 before selecting handset, headset or speaker. 2. Dial the telephone number yo
ページ14に含まれる内容の要旨
FEATURE BUTTONS END CALL BUTTON To end a conversation, press END CALL. In handset mode, the phone will go on-hook for 2 seconds and then go off hook again. This allows you to make another call. In speaker or headset mode, the phone will go on hook. MUTE BUTTON Press MUTE to speak without the person on the phone hearing your conversation. “MUTE” will show in the display. To resume the conversation, press MUTE. FLASH BUTTON This telephone provides a line break signal for accessing PABX service
ページ15に含まれる内容の要旨
2. Making A Call a. Press and release HEADSET. The 9225 selects Line 1 by default. To place a call on Line 2, press LINE2 before pressing HEADSET. b. When you hear a dial tone, dial the number or press a memory button. The number will appear on the display window. c. When your party answers, adjust the volume of the conversation by pressing the Volume Buttons on the base of the telephone. d. After the conversation has finished, press and release HEADSET to hang up. Note: 1. If you wish to swit
ページ16に含まれる内容の要旨
REDIAL BUTTON 1. To redial the last number dialed, come off hook and press REDIAL. 2. The selected number (32 digits maximum) will be redialed. To review dialed numbers. 1. While on hook, press REDIAL. 2. The display will show the last number dialed. 3. Use 5 or 6 to scroll through the list of dialed numbers. The last 15 dialed numbers are stored. 4. To dial the displayed number, go off hook. The number will be dialed after approximately 3 seconds. CALL FORWARD ON When you come off hook and p
ページ17に含まれる内容の要旨
CLEAR MSG BUTTON In most cases the message waiting indicators will go out shortly after you retrieve your messages. If they do not, press CLEAR MSG to clear these indicators manually. CONTRAST BUTTON Contrast can be altered when on hook by pressing the Contrast button on the display. There are 8 contrast levels. REPROGRAMMING NETWORK SERVICE BUTTONS CALL FORWARD ON, CALL FORWARD OFF or CALL WAITING OFF can be reprogrammed if your telephone company requires a different code. Simply follow the
ページ18に含まれる内容の要旨
REVIEW THE CONTENTS OF A MEMORY BUTTON While on hook, press the memory button or press SHIFT and then press the memory button. The display will show the memory contents. To dial this number, go off hook. STORE A CALLER ID RECORD TO A MEMORY BUTTON 1. Use 6or 5 to display the number. 2. Press and hold the memory key until the last digit of the number begins to flash. To PHONE BOOK The phonebook can store up to 70 names and numbers. ADDING AN ENTRY TO THE PHONE BOOK 1. Press MENU. 2. The displa
ページ19に含まれる内容の要旨
DIALING FROM THE PHONE BOOK To dial from the phone book, first display the desired number as described above. Then come off hook and the number will be dialed. DELETING A PHONE BOOK ENTRY With the number displayed, press DELETE. The display will show “DELETE?” Press DELETE again to delete the entry. Press ENTER to cancel. STORING A CALLER ID RECORD IN THE PHONE BOOK 1. Use 5 or 6 to display the number. 2. Press and hold ENTER until the first character of the name begins to flash. 3. Make
ページ20に含まれる内容の要旨
PRIVATE CALLS The message below will display when a caller has blocked delivery of his name or number. CALLER ID ON CALL WAITING Call-waiting service alerts you to a new call by playing a tone while you are on a call. Call Waiting Caller ID not only tells you there is another call waiting, but lets you know who the caller is before the call is answered. The name and number of the incoming call will be shown on the display. Press FLASH to place the first call on hold and answer the new call. Pre
