ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
SIP IP Phone VIP-254T_254PT Quick Installation Guide
ページ3に含まれる内容の要旨
Overview This quick installation guide describes the objectives; organization and basic installation of the PLANET VIP-254T/VIP-254PT SIP IP Phone (“IP Phone” in the following term), and explains how to establish your first voice over IP communication via PLANET product. Also, this guide shows you how to find additional information on related products and services. Respective model/descriptions are shown below: VIP-254T: SIP IP Phone VIP-254PT: 802.3af PoE SIP IP Phone The VIP-254 series I
ページ4に含まれる内容の要旨
Table of Contents Preparation before beginning administration on the IP Phone ............................... 5 Installation ................................................................................................ 5 Administration Interface .............................................................................. 7 Web configuration access: .................................................................... 7 Network Interface quick configurations ...........................
ページ5に含まれる内容の要旨
Document Objectives This guide provides physical installation, network configurations, and Internet access establishment information for the PLANET IP Phones. Document Organization This guide is organized as follows: • Preparation before beginning administration on PLANET IP Phone • Administration interface • Network Interface quick configurations • Internet access setup guide
ページ6に含まれる内容の要旨
Preparation before beginning administration on the IP Phone Installation VIP-254T: SIP IP Phone (2 x RJ-45) VIP-254PT: 802.3af PoE SIP IP Phone (2 x RJ-45, 1 x PoE for LAN interface) Step 1: Connecting Handset DC5V Handset Step 2: Connecting Power AC Power and Network PC LAN Plug the Ethernet cable into the back of the base station. Plug the other end of the Ethernet cable into your already prepared network connection.
ページ7に含まれる内容の要旨
DC5V Power Adapter (5V DC) NOTE: Use only the power adapter shipped with the unit to ensure correct functionality. Step 3: Adjust the stand angle. Press and hole the button of right side to change the stand mount angle. RJ-45 connector, to maintain the existing network structure, 1 PC connected directly to the PC through straight CAT-5 cable RJ-45 connector, for Internet access, connected directly to Switch/Hub through straight CAT-5 cable. 2 LAN The LAN interface also can be connected with
ページ8に含まれる内容の要旨
For VIP-254PT, either PoE or AC adapter can be deployed at one time Note Administration Interface The IP Phone provides GUI (Web based, Graphical User Interface) for machine management and administration. Key pad administration also available for simple configuration. Web configuration access: To start IP Phone web configuration, you must have one of these web browsers installed on computer for management • Microsoft Internet Explorer 6.0.0 or higher with Java support Default IP address of I
ページ9に含まれる内容の要旨
Network Interface quick configurations Execute your web browser, and insert the LAN IP address (default: 192.168.0.1) of SIP IP Pohne in the adddress bar. After logging on machine with username/ password (default: root / no password), browse to “Network” --> “Network settings” configuration menu: Parameter Description IP address LAN IP address of the IP Phone Default: 192.168.0.1 Mask LAN mask of the IP Phone Default: 255.255.255.0 Default Gateway Gateway of the IP Phone Default: 192.168.0.254
ページ10に含まれる内容の要旨
Save Change to Flash Memory Most of the IP Phone parameters will take effective after you modify, but it is just temporary stored on RAM only, it will disappear after your reboot or power off the IP Phone, to save the parameters into Flash ROM and let it take effective forever, please remember to press the Save & Reboot button after you modify the parameters.
ページ11に含まれる内容の要旨
Voice communication samples There are several ways to make calls to desired destination in IP Phone. In this section, we’ll lead you step by step to establish your first voice communication via keypad and web browsers operations. Peer to peer (P2P) mode STEP 1: Assuming there are two VIP-254T in the network the IP address are 192.168.0.1 and 192.168.0.2 VIP-254T-A VIP-254T-B LAN IP Address LAN IP Address (192.168.0.1) (192.168.0.2) VIP-254 VIP-254 STEP 2: Pick up handset or press “Hand Free”
ページ12に含まれる内容の要旨
STEP 1: Log in SIP-50 and create two testing accounts/password: 100 / 123 (for VIP-254T-A), and 200 / 123 (for VIP-254T-B) for the voice calls. STEP 2: Please log in VIP-254T-A via web browser, browse to the SIP setting menu and select the Domain Service config menu. In the setting page, please insert the account/password information obtained from your service provider (in this sample, we’re using PLANET SIP-50 as the SIP Proxy server for SIP account, call authentications), and then the sam
ページ13に含まれる内容の要旨
Quick reference in CD-ROM guide This guide is used to help you startup your SIP IP Phone settings. It is also recommended to check the user manual CD-ROM for more details like the “LCD menu”, “Web Setup”, and how to set the device back to default value. 12
ページ14に含まれる内容の要旨
