ページ1に含まれる内容の要旨
SOPHO iSMobile
DECT Cordless Handset
C244
USER GUIDE
ページ2に含まれる内容の要旨
Published by: PHILIPS COMMUNICATION SYSTEMS HILVERSUM, THE NETHERLANDS Order number: 9600 065 58002 User Guide C244 Date: July 2005 Great care has been taken to ensure the accuracy and com- pleteness of the information contained in these operating instructions. If, however, you should find a mistake or an omis- sion, or have a suggestion aimed at improving this User Guide, then please inform us at the following address: PHILIPS BUSINESS COMMUNICATIONS CUSTOMER SERVICES P.O. BOX 32 1200 JD HIL
ページ3に含まれる内容の要旨
Contents 1 Important Safety Information .......... 3 8 Calling ............................................ 15 Sensitive Electronic Environment ....... 3 Handset On / Off ............................. 15 Power Supply .................................... 3 Loudspeaker Volume ...................... 15 Safety Precautions ............................ 4 Handsfree ....................................... 15 Usage ............................................... 4 Muting .................................
ページ4に含まれる内容の要旨
16 Menu: Volume Settings ................. 29 19 Menu: Security Functions ............. 34 Earpiece .......................................... 29 Resetting the Handset .................... 34 Speaker .......................................... 29 Clear Phonebook ............................ 34 Changing the PIN ............................ 34 17 Menu: System ............................... 30 Read Only ....................................... 34 Registration Code ........................... 30 20 M
ページ5に含まれる内容の要旨
1 Important Safety Information Only use this product in countries where the appropriate authorities have given their authorisation. The CE symbol on the product certifies its conformity with the technical guidelines concerning user safety and electro-mag- netic compatibility valid at the time of approval; in accordance with European directive No. 91\263\EEC. This product complies with IP50 - according to IEC 529/ EN 60 529. Sensitive Any radio-based equipment can potentially cause interferenc
ページ6に含まれる内容の要旨
Safety Do not open the handset or charger, this could expose you to high voltages. Have all repairs carried out by authorized Precautions service personel. Do not allow the charger and the battery contacts to come into contact with conductive objects such as keys, paper clips, rings or bracelets. Do not allow the handset and charger to come into contact with water or chemicals. Only use the plug-in AC adapter and battery type supplied. Do not use AC adapters which are visibly dama
ページ7に含まれる内容の要旨
2Installation Installation Place the charger on a flat, even surface. Do not install the charger, handset and accessories in the proximity of: Location Water, moisture or damp areas. Sources of heat, direct sunlight or unventilated areas. Devices which generate strong magnetic fields, electrical appliances, fluorescent lamps, computers, radios, televisions or fax and telephone terminals. Areas where the handset can be covered, its ventilation is impaired and liquid can get inside.
ページ8に含まれる内容の要旨
Closing the battery compartment cover: Replace the cover by placing it on the compartment at a slight angle (1) and pressing it down until it clicks into place (2). Note: if the batteries are inserted incorrectly, the handset will not function, and may be damaged. Installing the To operate the charger a mains connection is required. Charger Check if the mains voltage does match the adapter mains voltage. Connect the cable on the plug-in AC adapter to the ter- minal on the bottom of the c
ページ9に含まれる内容の要旨
3 Important Battery Information Note: use only rechargable AAA NiMh battery of typical 800mAh, 1.2V. Never use a battery which is damaged or worn out. Heat or cold reduces the performance and service life of the batteries. It is possible that a handset with hot or cold batteries can be temporarily out of operation even if the batteries are fully charged. Used batteries should be disposed of in accordance with local authority regulations. Hand them in for recycling! Do not throw batteries i
ページ10に含まれる内容の要旨
4 Charging the Batteries Initial Setup Charge the batteries approximately 6 to 7 hours before initial use of the handset. This protective measure extends the ser- and Operation vice life of the batteries. The maximum power output is only attained after three to five charging and discharging cycles. Place the handset regularly in the charger thus ensuring opti- mum charging of the batteries. When replacing the batteries, pay attention to the correct polarity. It is essential to make sure that
ページ11に含まれる内容の要旨
Charge When the batteries’ capacity is almost exhausted, an acoustic warning is given in the form of 3 short ”beep” signals (only dur- Warning ing a call). Approximately 5 minutes of talk time is left. 9
ページ12に含まれる内容の要旨
5 Initial Setup and Operation Handset The handset can be operated on up to 5 different DECT sys- tems. To do so, it has to be registered to each DECT system. Registration Register the handset on the DECT system as described in ”Menu: System”. 10
ページ13に含まれる内容の要旨
6 Keys and Display Earpiece Earpiece Rear: Rear: Di Display splay Loudspeaker Loudspeaker Up and Do Up and Down keys wn keys (arr (arr ow ke ow keys) ys) for selecting the menu and entering the for selecting the menu and telephone book entering the telephone book Softkey for controlling the functions Softkey Softkey and features Softkey for controlling the for controlling the functions and features for controlling the functions and features functions and features Info key for caller list and
ページ14に含まれる内容の要旨
Display ‹œ ¢ ‰ ƒ Icon / textline Arrangement Station 1 Text line D• Menu Softkey line Icons ‹ Ringer deactivated. œ At least 2 bars: Good radio link ¢ On: Handset has a connection Flashing: Handset has an incoming call » On: Handsfree is activated C Flashing: Message in voicebox ‰ Flashing: One or more missed calls in the caller list ƒ Charge status of the batteries º On: Keypad is locked Text Line / In the top line of the display, information is given concerning the current status of the telep
ページ15に含まれる内容の要旨
7 Softkeys and the Cancel Key The Softkeys The four large keys below the dis- Tel Book play (see picture) are called the Newman softkeys. The functions allocated to Options ‘ Esc the keys are shown on the bottom line of the display. The key function changes automatically according to the respective operating state of the handset. Softkey: Arrow Symbols are displayed above the arrow keys which identify the respective functionality of the arrow keys: Keys ‘ - Opens the telephone book. - Whe
ページ16に含まれる内容の要旨
Example: Menu Press Menu. Use the arrow keys to Menu scroll through this list and confirm Key Lock the desired function with OK. OK ‘ Esc Example: Tel Book If the telephone book has been Telephone opened ( • -key), the arrow keys Miller Book can be used to select a name and Options ‘ Esc A can be used to dial. To change entries, switch over to the next menu using the Options softkey and choose for example Edit . Now you can edit the tele- phone number and then the name with which it is
ページ17に含まれる内容の要旨
8 Calling Handset On / The handset can be switched off by pressing C for more than 1 second when it is in an idle state. The handset is Off switched on by pressing C for more than 1 second or by placing the handset in the charger. Loudspeaker During a conversation you can change the volume of the ear- piece or the loudspeaker with the arrow keys in 7 steps. When Volume the minimum or maximum value is reached, you will hear a beep. In the display a bar will be shown which will increase /
ページ18に含まれる内容の要旨
Making a Call Dialing: œ¢ ƒ Press A and dial the phone num- 367_ ber. TelBook ‘ Options Pre-dialling: Predial: Enter the phone number and press 0123_ A. You can use pre-dialling to Options ‘ Esc chain telephone numbers from dif- ferent lists. Press Options, select one of the lists with the arrow keys and OK. Select a telephone number from the list. A long press on the hook key will add the number to the number predialled before. Note: In pre-dialling, if the input cursor is positioned be
ページ19に含まれる内容の要旨
Pre-dialling: If you press A for a longer period, the selected phone number is entered into the pre-dial mode. Digits can be added to the dis- played phone number, as required (see: Making a Call). To dial, press A. The pre-dial mode is termi- nated by pressing Esc. You can call directly from the redial list or transfer a phone number to the telephone book (refer to ”Menu: Redial list”). Making a Call Selection: Telephone Book from the Press the arrow keys with the Miller handset in an
ページ20に含まれる内容の要旨
Dialing: Use the arrow keys to select an entry. Press A and the phone number is dialed. Pre-dialling: If A is pressed for a longer period, the phone number is entered into the pre-dial mode. Digits (e.g. a code) can be added as required. The phone number is dialed by pressing A. The pre-dial mode is terminated by pressing Esc. You can call back directly from the caller list or transfer a phone num- ber to the telephone book (refer to ”Menu: Caller List”). Making a This handset can be u
