ページ1に含まれる内容の要旨
FP100-OM.qxd 7/12/98 08:56 Page 1
FP100
with 3 x One Touch Speed Dial Memories
Operating Guide
Feature•Phone Series
ページ2に含まれる内容の要旨
FP100-OM.qxd 7/12/98 08:56 Page 2 INTRODUCTION Congratulations on the purchase of your Uniden FP100 Telephone. The FP100 has been designed and engineered to exacting standards for reliability, long life and outstanding performance. To obtain the full benefit from your new telephone, please read this Operating Guide thoroughly. For your future reference, please fill in the panel below and attach your Purchase Receipt/Sales docket. Serial No. Date of purchase (found on the bottom of the unit)
ページ3に含まれる内容の要旨
CONTENTS FP100-OM.qxd 7/12/98 08:56 Page 3 CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Caring for your Tel
ページ4に含まれる内容の要旨
FP100-OM.qxd 7/12/98 08:56 Page 4 This page intentionally left blank. This page intentionally left blank. 4
ページ5に含まれる内容の要旨
IMPORTANT INFORMATION FP100-OM.qxd 7/12/98 08:56 Page 5 IMPORTANT INFORMATION When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a soft damp cloth
ページ6に含まれる内容の要旨
FP100-OM.qxd 7/12/98 08:56 Page 6 IMPORTANT INFORMATION 9. Unplug this product and refer servicing to qualified service personnel under the following conditions: A. If liquid has been spilled into the product. B. If the product has been exposed to rain or water. C. If the product does not operate normally when following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage, and will
ページ7に含まれる内容の要旨
PARTS CHECKLIST FP100-OM.qxd 7/12/98 08:56 Page 7 PARTS CHECKLIST (For New Zealand Model) Base Unit Curly Cord Handset Telephone Line Cord Wall Mounting Bracket FP100 with 3 x One Touch Speed Dial Memories Operating Guide Feature•Phone Series Operating Guide 2 x Wall Mounting Screws and Wall Plugs 7
ページ8に含まれる内容の要旨
FP100-OM.qxd 7/12/98 08:56 Page 8 PARTS CHECKLIST (For Australian Model ) Curly Cord Base Unit Handset Telephone Line Cord Wall Mounting Bracket and Plug FP100 with 3 x One Touch Speed Dial Memories Operating Guide Feature•Phone Series 2 x Wall Mounting Operating Guide Screws and Wall Plugs 8 PARTS CHECKLIST
ページ9に含まれる内容の要旨
FEATURES & FUNCTIONS FP100-OM.qxd 7/12/98 08:56 Page 9 FEATURES & FUNCTIONS • 3 One Touch Speed Dial Buttons Your most important numbers can be programmed into the memory, for one touch speed dialling. • Adjustable Ringer Volume and Tone Controls The ringing volume and tone can be adjusted to suit different home or office situations. • Wall Mountable This telephone can be simply wall mounted, using the enclosed wall mounting bracket and screws. • Last Number Redial If the number you are d
ページ10に含まれる内容の要旨
FP100-OM.qxd 7/12/98 08:56 Page 10 FEATURES & FUNCTIONS 8. call LED 1. Button 9. status LED 2. Button 10. Button 3. Button 11. Button 4. Button 12. tone Slide Switch 5. Handset Retainer Tab 13. Not used 6. Telephone Number Card 14. Telephone Line Jack 7. Numeric Keypad 15. ringer Volume Switch (Hi/Med/Low) 2 3 4 1 5 6 7 13 12 8 9 10 11 14 15 10 FEATURES & FUNCTIONS
ページ11に含まれる内容の要旨
INSTALLATION FP100-OM.qxd 7/12/98 08:56 Page 11 INSTALLATION HANDSET CORD CONNECTION Plug one end of the Handset Cord (curly) into the Handset and the other end into the jack on the side of the telephone. TELEPHONE LINE CORD CONNECTION Plug one end of the line cord (straight) into the telephone line jack on the back of the telephone and the other end into the wall outlet. NOTE: Most phone equipment available now use modular jacks. Phone cords are fitted with a molded plastic connector wh
ページ12に含まれる内容の要旨
FP100-OM.qxd 7/12/98 08:56 Page 12 INSTALLATION WALL MOUNTING You can mount your phone directly on a wall. Before mounting your phone, consider the following: • Select a location away from electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Make sure the wall material is capable of supporting the weight of the Telephone. • Use the screws (supplied) with anchoring devices suitable for the wall material where
ページ13に含まれる内容の要旨
USING YOUR FP100 FP100-OM.qxd 7/12/98 08:57 Page 13 USING YOUR FP100 MEMORY DIAL NUMBERS 3 one touch speed dial numbers can be stored into the memory of your telephone. STORING ONE-TOUCH SPEED DIAL MEMORIES 1. To program One-Touch Memories ( ~ ). a. Pickup the Handset. b. Press the button. c. Enter telephone number that you want to program. d. Press the button. e. Press the speed dial button ( ~ ). Example: To programme telephone number 273 8383 into one touch memory location number 3. Pick
ページ14に含まれる内容の要旨
FP100-OM.qxd 7/12/98 08:57 Page 14 USING YOUR FP100 PAUSE During the memory storage procedure you may enter a 4 second delay between numbers (for accessing a switchboard, or long distance service) by pressing the button on the Handset at the point in the number sequence you wish to pause. The button counts as one digit. Pressing more than once will increase the length of the pause between numbers. DIALING ONE TOUCH SPEED DIAL MEMORY NUMBERS For example, to dial memory 3 from the telephone 1
ページ15に含まれる内容の要旨
USING YOUR FP100 FP100-OM.qxd 7/12/98 08:57 Page 15 USING YOUR FP100 ADJUSTING THE RINGER VOLUME CONTROL While the phone is ringing, you can adjust the ringer volume of your telephone by moving the ringer switch to the desired low/medium/high position. ADJUSTING THE RINGER TONE CONTROL While the phone is ringing, you can adjust the Ringer Tone of your telephone by moving the tone slide control to the desired position. LED Indicators 1. call LED indicator: Red light which flashes when the tel
ページ16に含まれる内容の要旨
FP100-OM.qxd 7/12/98 08:57 Page 16 USING YOUR FP100 PLACING A TELEPHONE CALL 1. Remove the Handset from the Base. 2. Press the keypad buttons to dial the phone number you want. 3. After you have completed the phone call, place the Handset back on the Base. REDIAL If you want to redial the last number dialed, simply pick up the Handset then press the button. The telephone will automatically redial the last number dialed. RECEIVING A TELEPHONE CALL When the phone rings, pickup the Handset
ページ17に含まれる内容の要旨
TROUBLESHOOTING FP100-OM.qxd 7/12/98 08:57 Page 17 TROUBLESHOOTING If your Telephone is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service for assistance. New Zealand: 0800 4 UNIDEN 4 864336 Australia: 1800 632 789 Problem Suggestion Can’t make or receive calls. • Make sure you use only the telephone line cord supplied with this telephone. • Check that both ends of the telephone line cord and
ページ18に含まれる内容の要旨
FP100-OM.qxd 7/12/98 08:57 Page 18 SPECIFICATIONS Specifications for New Zealand Model Compliance PTC200 Size: 150mm(W) x 225mm(D) x 70mm(H) Weight: Approx. 536g Specifications, Features and availability of Optional Accessories shown are typical and subject to change without notice. NOTE: FOR USE OF THIS DEVICE IN NEW ZEALAND 1. The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection
ページ19に含まれる内容の要旨
WARRANTY FP100-OM.qxd 7/12/98 08:57 Page 19 WARRANTY One-Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: Uniden Australia Pty Limited ACN 001 865 498 Uniden New Zealand Limited ELEMENTS OF WARRANTY: Uniden warrants to the original retail owner for the duration of this warranty its FP100 (hereinafter referred to as the Product), to be free from defects in materials and craftsmanship with only the limitations or exclusions set out belo
ページ20に含まれる内容の要旨
FP100-OM.qxd 7/12/98 08:57 Page 20 © © UNIDEN 1998 Uniden Australia Pty Limited 1998 Uniden New Zealand Limited THANK YOU FOR PURCHASING A UNIDEN PHONE!
