ページ1に含まれる内容の要旨
USRM1-9895-00
2011
ページ2に含まれる内容の要旨
Structure of the Users Guide Chapter 1 Before You Begin Read here first. Chapter 2 Operating Procedures Chapter 3 Troubleshooting Chapter 4 Appendix
ページ3に含まれる内容の要旨
ページ4に含まれる内容の要旨
Important Information • This manual is designed to help you to install, operate and maintain the trimmer. Please read and under- stand this manual, and keep it in a safe and convenient place. � Do not operate the trimmer until you read and understand the instructions in this manual. � Canon shall not be liable for incidental, consequential damages resulting from: improper or inadequate maintenance by the customer, unauthorized modification or misuse, or operation outside of the environmen- tal
ページ5に含まれる内容の要旨
Safe Use of Machine To use this machine safely, proper operation and periodical maintenance are indispensable. Read the safety precautions described in this manual thoroughly, and do not perform operations or maintenance procedures until you understand them completely. The operating procedures and safety precautions described in this manual are valid only for proper use of this machine. Responsibility for any improper use or operation of this machine, lies with the user. Safety precautions ar
ページ6に含まれる内容の要旨
Caution Label Locations When removing jammed booklets from the trim section, take care not to touch the blade. When removing jammed booklets from Infeed section, do not put your hands and fingers close to the belt. Otherwise, if the belt drives by some chance, your hands and fingers may be caught. FCC NOTICES NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide re
ページ7に含まれる内容の要旨
CONTENTS Important Information ...............................................................................................................i Safe Use of Machine ...............................................................................................................ii Operating Safety Precautions ..................................................................................................ii Caution Label Locations ....................................................................
ページ8に含まれる内容の要旨
Before You Begin 1 CHAPTER Machine Description ............................................................................................................................ 1-2 Section Descriptions ............................................................................................................................ 1-3 [1] Infeed Section............................................................................................................................ 1-3 [2] Trim Section...........
ページ9に含まれる内容の要旨
Machine Description [6] [5] [4] [3] [2] [1] [1] Infeed Section (See page 1-3.) [2] Trim Section (See page 1-4.) [3] Booklet Lifter Section 1 (See page 1-5.) [4] Booklet Lifter Section 2 (See page 1-6.) [5] Front Cover [6] Conveyor Section (See page 1-7.) 1-2 Machine Description
ページ10に含まれる内容の要旨
Section Descriptions [1] Infeed Section Booklets delivered from the host machine are received here. The booklets are jogged, and then transported to the trim section. Once the trimmer is installed, you cannot touch this section. When booklet jams in this section, pull out the trim unit and remove the jammed booklet from the space on the trim unit (See page 1-4.). Top-bottom Guides These guides jog the booklet. Transport Hooks These hooks push each booklet into the trim section. Transport Bel
ページ11に含まれる内容の要旨
[2] Trim Section Each booklet delivered from the Infeed Section is trimmed along its fore-edge, and then moved to the booklet lifter section. To pull out the trim unit, hold the green handle. CAUTION When removing jammed booklets from Trim Section the trim section, take care not to touch the blade edge. Transport Belt Unit [TC4] When booklets jam in Removing Jammed Booklet in Infeed Section the trim section, hold the 1. Remove the jammed booklet from the space here. handle with green labe
ページ12に含まれる内容の要旨
[3] Booklet Lifter Section 1 This section lifts each booklet and delivers. Locking Lever Booklet Lifter Section Belt Unit [TB] If a booklets jam in the booklet lifter section, hold the green lock- ing lever and open this mecha- nism to remove the jammed booklets. Opening the Transport Belt Unit 1. Hold the locking lever. 2. Turn the lever to the left. Closing the Transport Belt Unit 1. Hold the locking lever. 2. Push the mechanism to the right until it is locked. Section Descriptions 1-5
ページ13に含まれる内容の要旨
[4] Booklet Lifter Section 2 This section delivers each booklet to the conveyor. Delivery Section Transport Belt Unit [TA] Delivery Section Cover If a booklets jam in the delivery section, hold the han- If a booklets jam in the delivery dle with green label and open this mechanism to section, open this cover and remove the jammed booklets. remove the jammed booklets. Opening the Transport Belt Unit 1. Lift the handle up. Transport Belts 2. Pull to the right. These belts move the booklets. 1-
ページ14に含まれる内容の要旨
[5] Conveyor Section The booklets delivered from the booklet lifter section are laid out on the conveyor. Handle [TE] Hold this handle and lift the roller unit when removing the booklets on the conveyor. Delivery Transport Rollers Output booklets are held by this roller. The position of the roller is set automati- cally to match the booklet size. Booklet Detect Sensor This sensor detects the conveyor full with stacked booklets. Transport Belts *1 Delivery Tray This belt moves while b
ページ15に含まれる内容の要旨
1-8 Section Descriptions
ページ16に含まれる内容の要旨
Operating Procedures 2 CHAPTER Trimmer Setup ..................................................................................................................................... 2-2 Operation While Trimming ................................................................................................................... 2-3 2-1
ページ17に含まれる内容の要旨
Trimmer Setup 1 Turn on the power switch on the saddle stitcher first, then turn on the power switch on the host machine (printer). Trimmer will also be powered on because it is connected to the saddle stitcher. See the operation manual for the printer and set up the printer. 2-2 Trimmer Setup
ページ18に含まれる内容の要旨
Operation While Trimming When the conveyor is full with booklets, remove the booklets. If the machine stops because the conveyor is full, remove the booklets, and the operation restarts automatically. · If you remove booklets before the conveyor is full, you can increase production efficiency, without interrupting the operation. · Be careful not to drop the book while removing. Delivery Tray Trimmer Booklet Waste Tray When the trimmer booklet waste tray is full, open the front cover, pull ou
ページ19に含まれる内容の要旨
If a booklets jam, open the cover or mechanism shown below to remove the jammed booklets. Delivery Section Cover Transport Belt Unit Front Cover Trim Unit CAUTION When removing jammed booklets from the trim sec- tion, take care not to touch the blade edge. · If the booklets jam frequently, refer to page 3-4 for instructions on correcting the problem. 2-4 Operation While Trimming
ページ20に含まれる内容の要旨
Troubleshooting 3 This section describes the cause and solution of the errors. CHAPTER Error Messages.................................................................................................................................... 3-2 Service Call Error............................................................................................................................ 3-2 Error Message Chart...............................................................................................
