ページ1に含まれる内容の要旨
OPERATIONS MANUAL
Bedienungsanleltung
Manual de funcionamiento
Manual de fonctionnement
Manual del utente
XL-500 II
DIRECT-DRIVE MANUAL TURNTABLE
Handdrehscheibe mit Direktantrieb
Giradiscos manual de accionamiento directo
Table tournante manuelle à entraînement direct
Giradischi manuale a comando diretto
ページ2に含まれる内容の要旨
Figure 1 12 11 16 10 21 8 9 20 6 18 1 7 19 5 2 4 15 17 3 22 23 13 14 Page 1
ページ3に含まれる内容の要旨
Figure 2 Figure 3 Page 2
ページ4に含まれる内容の要旨
4. Put the RUBBER MAT (4) on the PLATTER (2). Introduction Congratulations on purchasing a Gemini XL-500 II turntable. This state of CARTRIDGE INSTALLATION: (SEE FIG. 2) the art turntable includes the latest features. Prior to use, we suggest that Because all cartridges have their own designs, please refer to your you carefully read all the instructions. particular cartridge’s instructions to insure proper installation. Features 1. Connect the lead wires to the cartridge terminals. For your conv
ページ5に含まれる内容の要旨
INSTALLING THE DUSTCOVER: ADJUSTING THE PITCH CONTROL: 1. Mount the hinges onto the dustcover. 1. The XL-500 II is equipped with a PITCH CONTROL (21). When the PITCH CONTROL is in the center position the speed will be 33 or 45 2. Hold the dustcover in position, directly above the turntable, and slide the depending on which SPEED SELECTOR (15) is pushed. hinge bases into the holders mounted on the rear panel. 2. When the PITCH CONTROL is positioned off center, the pitch can vary 3. Always raise t
ページ6に含まれる内容の要旨
In the U.S.A., if you have any problems with this unit, call 1-732-969-9000 for customer service. Do not return equipment to your dealer. Parts of the design of this product may be protected by worldwide patents. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Gemini Sound Products Corp. shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual. No
