ページ1に含まれる内容の要旨
®
3GSDI to
®
HDMI 1.3
Converter
EXT-3GSDI-2-HDMI1.3
User Manual
www.gefen.com
ページ2に含まれる内容の要旨
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday, Pacifi c Time Write To: Gefen, LLC. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefen.com support@gefen.com Notice Gefen, LLC reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 3GSDI to HDMI 1.3 Converter is a trademark of Gefen
ページ3に含まれる内容の要旨
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Bottom Panel Layout 7 Bottom Panel Descriptions 8 Connecting And Operating The 3GSDI To HDMI 1.3 Converter 9 DIP Switch Features 11 Firmware Update 15 Specifi cations 1 Warranty
ページ4に含まれる内容の要旨
INTRODUCTION Congratulations on your purchase of the 3GSDI to HDMI 1.3 Converter. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-and-play products supplement cross-platform computer systems, professional audio/video environments and HDTV systems of all sizes with hard-working solutions that are easy
ページ5に含まれる内容の要旨
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE 3GSDI TO HDMI 1.3 CONVERTER • Supports the following SMPTE standards: 259M, 292M, SMPTE 274M, SMPTE 296M, ITU-R BT.656 and ITU-R BT.601 • Handles 3G-SDI SMPTE 425-A and 425-B / formats 1080P 50/59.94/60. • Support of 4 stereo 48 kHz audio streams. • The 3GSDI to HDMI 1.3 Converter supports the following resolutions: Video Resolution Refresh Rate (Hz) Rate 525i (NTSC) (480i) 59.94 SD 525p (480p) 59.94 SD 525p (480p) 60 SD 625i (
ページ6に含まれる内容の要旨
FEATURES Features • Field upgradable fi rmware using the built-in USB port. • Supports a test pattern at 720P/60 without needing a valid source signal • HMDI 1.3 compliant • Support for YCbCr, RGB, 4:2:2, 4:4:4, and 8 to 10 bits output formats. • Color space support: YCbCr, RGB. • Color sampling: 4:2:2 and 4:4:4. • Bit depth: 8, 10 bits. • Auto-detects optimal monitor format with EDID display capability information. • Support of 4 stereo 48 kHz audio streams. • Supports up to 8 channels of PCM au
ページ7に含まれる内容の要旨
PANEL LAYOUT Front Panel 1 2 3 Back Panel 4 5 6 7 8 9 4
ページ8に含まれる内容の要旨
PANEL DESCRIPTIONS 1 Video Lock LED Indicator This indicator will become active when the SDI input (SD/HD/3G) is locked. 2 3G LED Indicator This indicator will become active when the SDI input is a 3G source. 3 Power LED Indicator This indicator will become active when power is being supplied to the unit via the included 5V DC power adapter. 4 Locking 5V DC Power Receptacle This input will accept power via the included locking 5V DC power supply. Connect the power supply between this input and
ページ9に含まれる内容の要旨
BOTTOM PANEL LAYOUT Bottom Panel 12 3 4567 6
ページ10に含まれる内容の要旨
BOTTOM PANEL DESCRIPTIONS 1 SDI Input Color Sampling LED Indicator This LED indicator will relay the status of the incoming SDI input’s color sampling. Options are either 4:4:4 (LED ON) or 4:2:2 (LED OFF). 2 SDI Input Color Space LED Indicator This LED indicator will relay the status of the incoming SDI input’s color space. Options are either RGB (LED ON) or YCbCr (LED OFF). 3 Confi guration DIP Switches This DIP (Dual In-line Packages) switches will enable disable features on the 3GSDI to HDM
ページ11に含まれる内容の要旨
CONNECTING AND OPERATING THE 3GSDI TO HDMI 1.3 CONVERTER How to Connect the 3GSDI to HDMI 1.3 Converter 1. Connect the SDI source (SD/HD/3G) to the SDI input on the 3GSDI to HDMI 1.3 Converter using a user supplied SDI cable. 2. Optionally, connect an SDI capable output device to the SDI loop out connector for monitoring of the SDI input signal. 3. Optionally connect a 2 channel analog audio device to the 2 RCA style analog audio connectors for monitoring of the audio from the SDI input. 4. C
ページ12に含まれる内容の要旨
DIP SWITCH FEATURES The 3GSDI to HDMI 1.3 Converter has a series of DIP switches that will allow manual confi guration of the HDMI’s output video signal. There is also a DIP switch to display a test pattern through the HDMI output. Please see the next page for DIP switch features and operation. OFF Switch Description On (Factory Default) 1 Test pattern Off On 2 EDID Auto Manual HDMI Out 3 4:4:4 4:2:2 Sampling HDMI Out Color 4 RGB YCbCr Space HDMI Out RGB 5 Limited Full Range HDMI Out Deep-
ページ13に含まれる内容の要旨
DIP SWITCH FEATURES 3 When the EDID switch is ON (set to manual), this switch sets the output sampling of the video: 4:2:2 or 4:4:4. 4 When the EDID switch is ON (set to manual), this switch sets the output color space of the video: YCbCr or RGB. 5 When the EDID switch is ON (set to manual), and the HDMI output color is RGB, this switch specifi es the video range: limited (16-235) or full range (0-255). 6 When the EDID switch is ON (set to manual), this switch forces the output into Deep Col
ページ14に含まれる内容の要旨
FIRMWARE UPDATE Things you’ll need: • Computer running Windows XP or Vista • 3GSDI Converter Firmware Loader 1.1.18 software • USB cable (to-male) • Firmware fi les contained in 3GSDI To HDMI Converter Firmware 1.1.5 1. Download 3GSDI Converter Firmware Loader 1.0.18 from http://www.gefen.com/kvm/support/download.jsp a. Create a new folder and decompress the downloaded fi le Mini_Updater_Release_1_0_18.zip into the newly created folder. b. Read and follow instructions o
ページ15に含まれる内容の要旨
FIRMWARE UPDATE 3. Download and decompress 3GSDI to HDMI Converter Firmware 1.1.5 from http://www.gefen.com/kvm/support/download.jsp to the new folder created in Step #1. 4. After installing the Firmware Loader described in Step #2, run the program via the Windows Start Menu….Start/Programs/Gefen/Mini Updater/ Mini Updater. a. Use the drop-down arrow to choose the COM port shown in Step #2. 5. Browse for the fi le
ページ16に含まれる内容の要旨
FIRMWARE UPDATE 7. After pressing Update Device, you should see this window confi rming the correct COM port, the detected device, and the fi rmware binary fi le. 8. Another window will pop-up showing the fi rmware loader program doing a communication check 13
ページ17に含まれる内容の要旨
FIRMWARE UPDATE 9. If all steps are PASS, the fi rmware upload process can continue. Click YES to continue the update. If there is a FAIL, repeat steps #2-7. 10. After clicking YES, this window will appear twice showing th upload progress. 11. Once the upload process is complete, another window will pop up showing the message “Update fi nished”.”. 14
ページ18に含まれる内容の要旨
SPECIFICATIONS Max. image output resolutions: ............................2K (2048x1080), 1920x1080/60 Input Connector: ...........................................(1) BNC female SDI/HD-SDI/3G-SDI Input Connector: ............................................(1) Locking 5V DC power connector Input Connector: ..................................(1) USB connector (for fi rmware upgrades) Output Connector: ...........(1) BNC female SDI/HD-SDI/3G-SDI (w/buffered input) Output Connector: .................
ページ19に含まれる内容の要旨
WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notifi ed within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi cations. Equipment that fails under conditions other than those covered will be repaired at the current price of pa
ページ20に含まれる内容の要旨
