ページ1に含まれる内容の要旨
TM
EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.
If you need additional operating assistance
after reading this owner's manual or to order
replacement accessories, please call
TOLL FREE : 1-800-256-2487.
Or visit our WEB SITE at
http://www.EmersonAudioVideo.com
EWL15D6 (15 inch)
ページ2に含まれる内容の要旨
PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT CAUTION DANGEROUS VOLTAGE CONSTITUTING RISK OF ELECTRIC SHOCK A RISK OF ELECTRIC SHOCK IS DO NOT OPEN PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE CAUTION: TO REDUCE THE RISK OF ELECTRIC ARE IMPORTANT OPERATING AND SHOCK, DO NOT REMOVE COVER (OR BACK). NO MAINTENANCE INSTRUCTIONS IN THE USER SERVICEABLE PARTS INSIDE. REFER LITERATURE ACCOMP
ページ3に含まれる内容の要旨
14.Lightning-For added protection for this unit receiver during a b. If liquid has been spilled, or objects have fallen into the unit. lightning storm, or when it is left unattended and unused for c. If the unit has been exposed to rain or water. long periods of time, unplug it from the wall outlet and dis- d. If the unit does not operate normally by following the oper- connect the antenna or cable system. This will prevent damage ating instructions. Adjust only those controls that are cov- to t
ページ4に含まれる内容の要旨
SUPPLIED ACCESSORIES Remote Control Unit Batteries Owner’s Manual ( NE242UD ) 2 AA Batteries ( 1EMN21902 ) If you need to replace these accessories, please refer to the PART NO. under the illustrations and call our • help line mentioned on the front page. Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators • (Splitter). Contact your local electronics store for these items. LOCATION MOISTURE WARNING For safe operation and satisfactory performance of M
ページ5に含まれる内容の要旨
TABLE OF CONTENTS PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 SEARCH FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . .21 TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . .2 TITLE / CHAPTER SEARCH . . . . . . . . . . . . . . . . . . .21 SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . .4 TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
FEATURES TV Mode MTS/SAP Tuner Auto power off system–If there is no air signal input • • from the antenna terminal and no operation for 15 Infrared remote control • minutes, the unit will turn itself off automatically. Trilingual on screen TV setup display available in • Sleep timer–Allows you to have the unit automati- English, Spanish or French • cally turn off at a desired time. 181 channel capability PLL frequency synthesizer • V-CHIP–Enables parents to prevent their children tuner with dire
ページ7に含まれる内容の要旨
OPERATING CONTROLS AND FUNCTIONS NOTE When you select DVD mode, press [PLAY O O] or [EJECT A] first or insert a disc into the disc slot. • Otherwise, the DVD features are not operated. - REMOTE CONTROL 9.SETUP button (P.12, P.28) Press to enter or exit the setup menu of TV/DVD. 10. TITLE button (P.19) POWER PICTURE SELECT EJECT Press to display the title menu. 1 15 11. CLEAR button (P.21) 2 16 123 Press to clear/cancel a setting currently entered. CH. 17 Press to clear “DISC INSIDE” display. 456
ページ8に含まれる内容の要旨
26. RETURN button (P.22) 29. REPEAT button (P.23) Press to return to the previous screen in the setup Repeats playback of the current disc, title, menu. chapter or track. 27. A-B button (P.23) 30. SUBTITLE button (P.25) Press to repeat the playback of a selected section. Press to select a desired subtitle language. 28. ANGLE button (P.26) Press to change the camera angle to see the sequence being played back from a different angle (if available). - CONTROL PANEL 31. MENU button 31 323334 35 36
ページ9に含まれる内容の要旨
PREPARATION FOR USE ANTENNA/CABLE CONNECTION NOTE Cables used here are commercially available. • For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT jack • before moving the unit. - ANTENNA/CABLE CONNECTION IF YOU HAVE A JACK ON THE WALL Connect the TV to the wall-mounted antenna jack with an RF cable (commercially available). [Rear of this unit] IF YOU HAVE A WIRED CABLE Connect the TV to the wired antenna cable. NOTE Before plugging the antenna into the ANT
ページ10に含まれる内容の要旨
EXTERNAL CONNECTION You can connect this unit to your own Audio/Video ex. equipment. Be sure to turn off the power to all components in • the system before connecting another component. AUDIO Refer to the Owner’s Manuals for the equipment • to be connected to the unit. VIDEO2 Headphone NOTE ･ To connect a headphone When you use the external input, select “VIDEO1” or (not supplied) for VIDEO1 personal listening. “VIDEO2” by pressing [SELECT]. (Refer to page 11.) To use the VIDEO1 input jacks, s
ページ11に含まれる内容の要旨
TV SECTION TV OPERATION AND SETTINGS INITIAL SET UP WATCHING A TV PROGRAM When you turn on the power for the first time, 1 Press[POWER] to turn on the unit. TV TV the SELECT LANGUAGE screen is displayed. POWER Select the language for screen display and perform auto programming of the channels. NOTE - HELPFUL HINTS - If the TV screen shows snow • 1. PLEASE CHECK TO SEE IF THE 1 After antenna or cable connection is ANTENNA/CABLE/SATELLITE IS noise and there is no operation PROPERLY CONNECTED
ページ12に含まれる内容の要旨
ADDING/DELETING CHANNELS CHANNEL SET UP The channels you no longer receive or seldom watch AUTO CHANNEL PROGRAMMING can be deleted from the memory. (Of course, you can As the initial setting, this unit has memorized all add the deleted channel into the memory again.) channels, including the ones not available in your area. This feature automatically puts only available 1 Press [SETUP] then press [K] or [L] to point channels into the memory. to “CHANNEL SET UP”. - TV SET UP - 1 Press [SETUP] then
ページ13に含まれる内容の要旨
POWER PICTURE SELECT EJECT BACK LIGHT SETTING 1 Press [SETUP] then press [K] or [L] to point 3 789 VOL. SLEEP +100 to “BACK LIGHT”. 0 +10 - TV SET UP - SKIP ZOOM MUTE CHANNEL SET UP V-CHIP SET UP SETUP LANGUAGE [ENGLISH] CAPTION [OFF] B BACK LIGHT [BRIGHT] PLAY REV FWD STOP DISC PAUSE SLOW MENU 2 Press [ENTER] then press [s] or [B] to DISPLAY select to “BRIGHT”, “NORMAL” or “DARK”. ENTER SETUP TITLE RETURN ENTER CLEAR SEARCH MODE REPEAT A-B AUDIO SUBTITLE ANGLE MODE 3 Press [SETUP]. SETUP Shaded
ページ14に含まれる内容の要旨
NOTE CLOSED CAPTION SYSTEM Even if there is a power failure of any • You can view specially labeled (cc) TV programs, kind, the unit will retain its memory for movies, news and pre-recorded tapes with either a this feature. dialogue caption or text display. CAPTION mode: You can watch dramas, movies and news while captioning the dialogues and the contents MTS (Multi-Channel Television of news. Sound) System TEXT mode: You can watch half screen text informa- tion if you want. TO SELECT TV SOUND M
ページ15に含まれる内容の要旨
A TV RATING SET UP 123 CH. 456 Follow steps to in the V-CHIP SET UP. 1 3 789 4 Press [K] or [L] to select the desired TV rat- VOL. SLEEP +100 ing to be blocked then press [ENTER] repeat- 0 +10 SKIP ZOOM MUTE edly to set “BLOCK” or “VIEW”. B TV–Y [VIEW] TV–Y7 ( ) [VIEW] PLAY TV–G [VIEW] ENTER TV–PG ( ) [VIEW] REV FWD TV–14 ( ) [VIEW] TV–MA ( ) [VIEW] STOP DISC PAUSE SLOW MENU Selection Rating Category Explanations DISPLAY ENTER TV-Y Appropriate for all children SETUP TITLE RETURN TV-Y7 Appropriat
ページ16に含まれる内容の要旨
Make sure you enter exactly the same new code 6 Press [SETUP] to exit the menu. • SETUP in the “CONFIRM CODE” space as one in the “NEW CODE” space. If they are different, the “NEW CODE” space is cleared for redoing. NOTE 5 Press [SETUP] to exit the menu. To change the rating, the TV must be turned • SETUP to an unprotected program. If “PROTECTED PROGRAM by ...” appears on the screen, please change the channel to a station that is NOTE not protected. Your personal access code will be erased and •
ページ17に含まれる内容の要旨
DVD SECTION ABOUT THE DISCS PLAYABLE DISCS Playable Recorded Region code Disc size Disc type Mark (logo) signals discs DVD-Video or * 1,2,4,6,10,11 DVD-RW Example DVD-R Title 1 Title 2 Digital video 5 inches * 1,3,4,5, Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2 (MPEG2) (12cm) 6,7,9,10 DVD+RW DVD+R * 1,3,4,5, 6,8,9,10 Audio CD * 4,6,10 Audio CD Example 5 inches Digital audio Track 1 Track 2T Track 3 Track 4 rack 5 Track 6 (12cm) CD-RW CD-R * 4,5,6,9,10 is a trademark of DVD Forma
ページ18に含まれる内容の要旨
PLAYING A DISC POWER PICTURE SELECT EJECT 4 Press [STOP C] to stop playback. STOP 3 SKIP ZOOM MUTE 5 Press [EJECT A] to remove the disc from the unit. EJECT PLAY REV FWD STOP NOTE DISC SLOW PAUSE MENU When the DVD mode has been switched to the • TV mode, the DVD mode shuts down first and DISPLAY then the TV picture and sound appears in about ENTER 4 seconds. Similarly, when [POWER] is SETUP TITLE RETURN pressed to turn off in the DVD mode, this mode shuts down first and then the unit is turned o
ページ19に含まれる内容の要旨
DISC MENU RESUME 1 Press [DISC MENU]. 1 During playback, press [STOP C]. DISC MENU Resume ON STOP The DVD main menu will appear. • Press ’PLAY’ to play from here. To play the beginning, If the feature is not available, symbol may • press ’STOP’ first and then ’PLAY’. appear on the TV screen. If disc menu is available on the disc, audio lan- • guage, subtitle options, chapters for the title and other options will appear for selection. Resume message will appear on the TV screen. • 2 Press [K], [
ページ20に含まれる内容の要旨
FAST FORWARD / ZOOM FAST REVERSE The Zoom function allows you to enlarge the video 1 During playback, press [FWD g] or image and to pan through the enlarged image. [REV h]. 1 Press [ZOOM] during playback. REV FWD ZOOM SLOW Playback will continue. • “ g 1” or “h 1” appears on the screen. • 2 Press [ZOOM] repeatedly to select the 2 To select another speed, repeat step 1 until required zoom factor: ZOOM1, ZOOM2, your required speed number appears on the ZOOM3 or OFF. screen. ZOOM For DVDs, fast fo
