ページ1に含まれる内容の要旨
1
530516-1_D
Quick Disconnect Mounting Bracket
Thank You
Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation
by designing and manufacturing top-quality, thoroughly reliable marine equipment. Genuine Humminbird®
accessories offer the opportunity to upgrade and expand the capabilities of your Humminbird® product.
Your Humminbird® accessory is designed for trouble-free use in even the harshest marine environment.
In the unlikely event that your
ページ2に含まれる内容の要旨
2 530516-1_D Quick Disconnect Mounting Bracket Route the Cables 2. Drilling the Mounting Holes Through the Mounting Bracket 1. Set the mounting bracket in place on the mounting surface. Mark the four mounting screw locations Cables with a pencil or a punch. Mounting Bracket 2. Set the mounting bracket aside, and drill the four mounting holes using a 9/64” drill bit. If you have access to the underside of the mounting surface, mark and drill a 1” hole centered between the four mounting screw hole
ページ3に含まれる内容の要旨
3 530516-1_D Quick Disconnect Mounting Bracket Cable Connector Holder 4. Connecting the Cable Transducer Accessory Communications Power 1. Insert the cable connector into the appropriate slots of the connector holder. The cable connectors are labeled, and there are corresponding labels on the connector holder on the rear of the fishfinder. The slots are keyed to prevent reversed installation, so be careful not to force the connector into the holder. 2. Carefully pull the excess cable from beneat
ページ4に含まれる内容の要旨
4 530516-1_D Quick Disconnect Mounting Bracket 1-Year Limited Warranty Contact Humminbird® We warrant the original retail purchaser that products made by Contact the Humminbird® Customer Resource Center Humminbird® have been manufactured free from defects in materials in any of the following ways: and workmanship. This warranty is effective for one year from the date of original retail purchase. Humminbird® products found to be defective By Telephone and covered by this warranty will be replaced
