ページ1に含まれる内容の要旨
Installation and Assembly:
Floor Stand Carriage for Additional Screens
Model: ACC 604
ACC 604
FPZ-600
Max Load Capacity For Floor Stand With ACC 604:
Four screens at 200 lb (90.7 kg) each
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com
ISSUED: 02-14-06 SHEET #: 202-9111-2 06-16-06
ページ2に含まれる内容の要旨
Note: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at 1-800-729-0307. • This product should only be installed by someone of good mechanical aptitude, has experience with basic building construction, and f
ページ3に含まれる内容の要旨
Parts List Description Qty. Part # Acarriage 1201-1020 adapter plate 2 201-1022 B C 5/16-24 x 1/4" set screw 4 520-9566 A D M6 x 20 mm serrated washer head socket pin screw 4 510-9554 B M10 x 15 mm socket head screw 4 520-9262 E F M6 x 12 mm phillips screw 4 520-1128 G M6 x 20 mm phillips screw 4 520-9402 H M6 x 30 mm phillips screw 4 510-9109 M4 x 10 mm phillips screw 4 504-9012 I J M4 x 20 mm phillips screw 4 504-9020 K .198" ID x .313" OD x .437" H retaining spacer 4 590-5005 6 mm non
ページ4に含まれる内容の要旨
Attaching Adapter Plate to Screen with VESA 100 Mounting Pattern WARNING • If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not tightly secured, damage may occur to screen or product may fail. Choose hole pattern as shown in figure 2.1. Attach 2 adapter plate (B) to back of screen using four M4 x 10 mm screws (I). Note: Orientation of "UP" arrow is critical. Skip to step 3 on page 6. B I fig 2.1 Attaching Adapter Plate to Screen wi
ページ5に含まれる内容の要旨
Attaching Adapter Plate to Screen with VESA 200 x 200 Mounting Pattern WARNING • If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail. Choose hole pattern as shown in figure 2.3. Attach 2 adapter plate (B) to back of screen using four M6 x 12 mm screws (F) as shown. Note: Orientation of "UP" arrow is critical. *Note: If screw (F) gets less than three threads of engagement, a
ページ6に含まれる内容の要旨
Hook adapter plate (B) onto carriage (A) and secure using two M6 x 20 mm serrated washer head socket pin screws 3 (D) as shown in figure 3 and detail 2. Tighten screws using 4 mm security allen wrench (M). B A D DETAIL 2 fig 3 To install second screen, repeat steps four and five for back side of carriage (A). 4 ISSUED: 02-14-06 SHEET #: 202-9111-2 06-16-06 6 of 6 © 2006 Peerless Industries, Inc. All rights reserved. Peerless is a registered trademark of Peerless Industries, Inc. All other bran