ページ1に含まれる内容の要旨
MS60BKR
fl at panel solutions
Fits TVs 32”- 60”
Fixed Wall Mount for LCD, Plasma,
Maximum Load
and LED Displays
Capacity – 130 lb (60kg)
Instruction Manual
Specifi cations
Display Size: 32” to 60”
Maximum Load: 130 lb (60kg)
Mounting Pattern: 600 mm x 400 mm (23.6” x 15.7”) max
Profi le: 1.2” (3.0 cm)
Box contents
Wall Plate (x1) Instruction Manual (x1)
Mount Arm (x2) Hardware Kit (x1)
Safety Rod (x1) Template (x1)
Warnings
1. Read these instructions before you begi
ページ2に含まれる内容の要旨
Tools required Phillips-Head Screwdriver Ratchet or Driver with 13 mm (1/2”) Socket Electric or Portable Drill 5 mm (3/16”) Drill Bit and Stud Finder for Drywall Installation 10 mm (3/8”) Masonry Bit for Concrete Installation Level Hardware kit (A) M8 x 63 Lag Bolt (x2) (G) M6 x 30 Screw (x4) (B) Lag Bolt Washer (x2) (H) M8 x 12 Screw (x4) (C) Concrete Anchor (x2) (I) M8 x 30 Screw (x4) (D) M4 x 12 Screw (x4) (J) M6 Washer (x4) (E) M4 x 20 Screw (x4) (K) Spacer (x8) (F) M6 x 12
ページ3に含まれる内容の要旨
Part 1B – Mounting to the Wall (Concrete) IMPORTANT! For safety reasons, the concrete wall must be capable of supporting the combined weight of the mount and the display. The manufacturer takes no responsibility for failure caused by walls of insuffi cient strength. 1. Place the mounting template against the wall in the desired location. Make sure the template is level. Fig.3 2. Drill two 10 mm (3/8”) holes in the wall using the template as a guide. Remove any excess dust from the holes (
ページ4に含まれる内容の要旨
Part 3 – Final Assembly 1. With the help of another person, carefully lift your display and place it on the wall plate. Do not release the display until the mount arms have securely hooked onto the wall plate. 2. Insert the safety rod through the wall plate to prevent the display from being lifted from the wall plate. A padlock can be inserted into the end of the rod to help prevent theft of your display (see Fig. 6). Safety Rod Padlock (optional, not included) Fig.6 IMPORTANT! The saf
