ページ1に含まれる内容の要旨
User’s
Instructions
HDTV DIGITAL RECEIVER
DST-HD1100E
Digital STREAM Technology, Inc.
Keumbok BLDG. 45-2 Songpa-ku Bangee-dong
Seoul, Korea
Tel : + 82 2 415 6500 Fax: + 82 2 415 6540
e-mail : sales@dstreamtech.com
© Copyright Digital STREAM Technology, Inc. 2002
ページ2に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER WARNING: TO REDUCE THE RISK OF ELECTRONIC SHOCK DO NOT REMOVE COVER ( OR BACK ). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATEARL TRIAAGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED ”DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PRESONS. THE
ページ3に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER TABLE OF CONTENTS 1. DST HD 1100E: HDTV Digital Receiver ............................. 4 1.1 Front Panel Controls and LEDs ............................................................................. 4 1.2 Rear Panel Jacks ................................................................................................... 5 2. The Remote Control.......................................................... 7 2.1 Reviewing the Remote Control ........
ページ4に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER 1. DST HD 1100E: HDTV Digital Receiver 1.1 Front Panel Controls and LEDs STANDBY/ON Press to turn the power on or off. SEL Press to make a selection when using the on-screen menus. Left/Right/Up/Down Use to change channels or to move on-screen menus. MENU Press to display the OSD(on-screen display). LED When the receiver is powered on, the LED indicator lights green. Otherwise, it ligh
ページ5に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER 1.2 Rear Panel Jacks VIDEO OUT If your TV or monitor has Audio/Video capability, connect this jack to the AV Input jack on your TV or monitor using an Audio/Video cable. Left/Right ANALOG-AUDIO OUTPUTS(with Digital Video Output) Connect these terminals to the analog audio inputs of a TV set (i.e., to a TV that has jacks for L/R inputs). Or, connect these terminals to the L/R inputs of a separate audio component.
ページ6に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER Left/Right ANALOG-AUDIO OUTPUTS(with Analog Video Output) Connect these terminals to the analog audio inputs of a TV set (i.e., to a TV that has jacks for L/R inputs). Or, connect these terminals to the L/R inputs of a separate audio component. Recommended to use these terminals when you use analog for video. DTV OUT COMPONENT (Y, PB, PR format) Connect to the Y-PB-PR digital video input of a digital compatible TV set (or the Y-PB-PR inputs o
ページ7に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER 2. The Remote Control 2.1 Reviewing the Remote Control The HDTV Digital Receiver remote control and on-screen menu system work together to make operating the HDTV Digital Receiver as simple as possible. POWER Press to turn the power on or off. MUTE Press to temporarily cut off the sound. CAPTION When a digital signal is received, only available languages can be selected. Currently the HDTV Digital Receiver supports English caption. Chann
ページ8に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER CH+, CH- (Channel Up and Down) Press to change channels. Minor Channel UP/DOWN( , ) Press to increase or decrease the minor. SEL While using the on-screen menus, press to activate (or change) a particular item. Otherwise press SEL to display information about the current box settings and program: Channel number, Time, Program title, Program duration, Caption, Digital picture grade, and MTS language. ESC Press to exit the current on-screen menu
ページ9に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER 3. Operation 3.1 The On-Screen Menu System The seven menu controls are located in the center of the remote control: MENU, UP(Channel Up), DOWN(Channel Down), LEFT, RIGHT, SEL(SEL), ESC(Previous Menu). 3.2 Viewing the Display You can quickly check the status of many of the HDTV Digital Receiver features and options by pressing the SEL button. The Display shows: • The major channel number and the minor channel number if you are view
ページ10に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER 3.3 Using the EPG (Electronic Program Guide) 1 Press the MENU on the remote control. 2 Press the UP or DOWN on the remote control to highlight the “EPG” icon and press SEL. 10
ページ11に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER 3 Press the Arrow buttons on the remote control repeatedly to move to the channel with program information. 4 You may now: • Obtain additional program details: By pressing the UP, DOWN, RIGHT or LEFT button to highlight a program title and press SEL. NOTES You can quickly switch to a GUIDE mode by pressing the “Program Guide( )” button on the remote control. 11
ページ12に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER 3.4 Changing the Screen Format Your selection in the Screen Format menu depends on the type of TV or monitor you are using with your HDTV Digital Receiver. 1 Press the MENU button on the remote control. 2 Press the UP or DOWN button on the remote control to highlight the “A/V” icon and press SEL. 12
ページ13に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER 3 Press the UP or DOWN button on the remote control to highlight the “Display Mode” icon and press SEL. 4 Press the UP or DOWN button on the remote control to select your Monitor Type either 4:3 or 16:9 and press the RIGHT button to highlight “Display Mode” 5 Press the UP or DOWN button on the remote control to select a “Display Mode” among ‘Normal’,’ Wide’ or ‘Zoom’. 13
ページ14に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER With a 4:3 Ratio TV or Monitor If you are using a 4:3 ratio TV or monitor and receive an image with a 16:9 ratio, you need to specify how the image is displayed. Wide(Letter box) Choose this when receiving a 16:9 image and you want to see the original wide format. Letter boxing shrinks the picture so the entire image will fit on the screen. Blank panels appear at the top and bottom of the screen. Normal Choose this when you want the television to
ページ15に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER 3.5 Choosing a Digital Sound Format (Dolby Digital or PCM) Both audio and digital sound are available from the rear-panel connectors of the HDTV Digital Receiver. The digital audio output is an optical connector labeled “SPDIF Output.” After connecting the optical digital-audio component, you must specify the transmission format (PCM or Dolby Digital, as appropriate to your particular equipment). 1 Press the MENU button on the remote control.
ページ16に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER 3 Press the UP or DOWN button on the remote control to highlight the “Digital Audio” icon and press SEL. 4 Press the UP or DOWN button on the remote control to highlight “Dolby Digital” or “PCM” and press SEL to save the format. 16
ページ17に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER 3.6 Setting Up Captions (On-screen Text Messages) How to Activate or Deactivate the On-screen Captions 1 Press the CC button on the remote control. 2 Press the CC button repeatedly to alternate between “English” and “Off”. * The current HDTV Digital Receiver supports ‘English’ only. (Note: Availability of captions depends on the particular program being broadcast.) 3.7 Choosing a Sound “Multitrack” 1 Press the MTS button on the remote co
ページ18に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER 3.8 Selecting “Input Type”(Air or Cable) You can select 'Air' for terrestrial broadcast and 'Cable' for cable. 1 Press the MENU button on the remote control. 2 Press the UP or DOWN button on the remote control to highlight the “Channel” icon and press SEL. 18
ページ19に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER 3 Press the UP or DOWN button on the remote control to highlight the “Input Select” icon and press SEL. 4 Press the UP or DOWN button on the remote control to highlight “Air” or “Cable” and press SEL to save the type. 19
ページ20に含まれる内容の要旨
DST-HD1100E HDTV DIGITAL RECEIVER 3.9 Memorizing Channels Before you can use any of the special channel buttons (CH+,CH-, FAV-CH), the available channels must first be scanned and memorized. To memorize channels: 1 Press the MENU button on the remote control. 2 Press the UP or DOWN button on the remote control to highlight the “Channel” icon and press SEL. 20
