ページ1に含まれる内容の要旨
Philips TV Software Upgrade with Portable Memory
Introduction
Philips offers software upgrade capability for your TV using USB portable memory. After you have
completed a software upgrade, your TV will typically perform better. What improvements are
made depends on the upgrade software you are using as well as the software your TV contained
before the upgrade. You can execute the software upgrade procedure yourself. Be aware that the
content of this document is addressing technical and
ページ2に含まれる内容の要旨
4. Upgrading will now begin and the status of the upgrade procedure will the displayed. Warning: • You are not allowed to remove the USB portable memory during the upgrade procedure! • In case of a power drop during the upgrade procedure, don’t remove the USB portable memory from the TV. The TV will continue the upgrade as soon as the power comes back. • If you try to upgrade to a software version lower than the current version, a confirmation will be asked. Downgradin
ページ3に含まれる内容の要旨
Software History LC81ULP-1.15 Following issues were solved. • TV turns OFF and ON by itself randomly when viewing TV and AV channels. LC81ULP-1.14 Following issues were solved. • No picture, no sound & no back light but LED is turned ON when the TV wake up from standby mode. • Translation errors in Spanish and France TV menu • Rephrase the help texts for the Retail and Home mode in the TV menu LC81ULP-1.13 Following issues were solved. • Digital Natural Motion feature is t
ページ4に含まれる内容の要旨
• TV menu shifted horizontally to the right when viewing PAL “50Hz” signal from either the AV source or Off-air transmission. (Only applicable for 42” & 47” models). • Picture and TV menu shifted horizontally to the right when viewing PAL “50Hz” signal from either the AV source or Off-air transmission. (Only applicable for 52” models). • Faint image is still visible for a few seconds after TV is turn off. LC81ULP-1.09 • Improvement on motion picture judder when “Digital Natural Motion” m
ページ5に含まれる内容の要旨
• Correction of non-linear stretching for “Automatic” on 4:3 sources LC81ULP-1.00 • Solved channel map erased issue • Compatible with ECO 8280 IC LC81ULP-0.13 • Release for Trial Run
