ページ1に含まれる内容の要旨
65785
JuMBo unIVersal
reMote control
InstructIons and precautIons
Visit our website at: http://www.harborfreight.com
sa Ve these InstructIons. read all
precautIons and InstructIons.
© ®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this document or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing i
ページ2に含まれる内容の要旨
specIFIcatIons Batteries Required (2) AA 1.5V Batteries Dimensions 11” L x 5” W x 3/4” Thick unpackIng When unpacking, make sure the item is intact and undamaged. If any parts are missing or broken, call Harbor Freight Tools at the number shown on the cover of this document. IntroductIon 1 2 3 The Jumbo Universal remote control can oper- ate up to eight types on devices, includeing; TV, VCR, DVD, Satallite. You may need the remote. IMportant saFetY 4 InForMatIon 9 use precautions 1. This p
ページ3に含まれる内容の要旨
reVerse, pla Y, For Ward, rec: These but- Button FunctIons tons are for DVD//VCD/DVR use and operate the same as your original remote. You must press the RECORD button twice to start recording. code search : Used to program the remote or to search through codes. InFo: Shows the date and the time if your TV or VCR has that feature. led IndIcator lIght : The LED flashes to show that the remote is working properly. Please note: clear: Removes the on screen display to return The LED Indicato
ページ4に含まれる内容の要旨
2. Press and quickly release the correct product For tV only (direct entry) continued . key (TV, VCR, etc.) from the row of Devise Select Controls (9). The LED Indicator will blink and remain on. 7. Manually turn on the unit to be controlled. 3. Enter the corresponding 3-digit code. After a 8. Press and hold the Code Search Button until valid code entry the LED Indicator turns off. the LED stays on. Release the Code Search In case of an invalid code entry, the LED will Button. flash.
ページ5に含まれる内容の要旨
Remote is in TV mode, you must change auto code search the mode to operate other devices like DVD, 1. If your device does not respond after you VCR, satellite receiver or cable box. For have tried all the codes for your brand, or if example, if the Remote is in VCR mode and your brand is not listed, try searching for your you wish to turn off the TV, first press the TV brand this way: key before pressing the Power Button. 2. Manually turn on the unit to be controlled. on-screen Menus-ac
ページ6に含まれる内容の要旨
3. Press and hold the Sleep Button for five sec- record serial number here: onds. The LED light will turn on. note: If product has no serial number, record month and year of purchase instead. 4. Release the Sleep Button. 5. Using the number keys, enter the desired note: No replacement parts are available. time in minutes (from 1 to 99). To set the Timer to time that is under ten minutes, press This device complies with part 15 of the FCC “0” and then the desired number (“05” for five Rule
ページ7に含まれる内容の要旨
tV codes SKU 65785 For technical questions, please call 1-800-444-3353. Page 7
ページ8に含まれる内容の要旨
tV codes contInued SKU 65785 For technical questions, please call 1-800-444-3353. Page 8
ページ9に含まれる内容の要旨
Vcr codes SKU 65785 For technical questions, please call 1-800-444-3353. Page 9
ページ10に含まれる内容の要旨
Vcr codes contInued laser dIsc codes SKU 65785 For technical questions, please call 1-800-444-3353. Page 10
ページ11に含まれる内容の要旨
dVd codes contInued SKU 65785 For technical questions, please call 1-800-444-3353. Page 11
ページ12に含まれる内容の要旨
caBle codes SKU 65785 For technical questions, please call 1-800-444-3353. Page 12
ページ13に含まれる内容の要旨
satalIte codes dVd/Vcr coMBo sYsteM codes tV/Vcr coMBo paIrs codes SKU 65785 For technical questions, please call 1-800-444-3353. Page 13
