ページ1に含まれる内容の要旨
S70
SYSTEM REMOTE CONTROL
OWNER’S MANUAL
ページ2に含まれる内容の要旨
CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Set-up of the S70 remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Component Selection S100 or S170 preamp selection Activating and setting the clock Adjusting Display Contrast Using the NAD S70 Remote Control . . . . . . . . . . . . . . . . .
ページ3に含まれる内容の要旨
NAD S70 System Remote Control Menu & Sub-menu Structure Main Menu Preamp Selection Contrast (eg. S170 or S100) Adjustment System Setup Menu Clock Setup Menu Timer Setup Menu Component No.1 menu (eg. AMP) Timer Select Menu Component No.2 menu (eg. PREAMP) Component No.3 menu (eg. TUNER) Component No.4 menu (eg. CD) Timer Status Menu FIGURE 1 NOTE: Component menus are optional. Please refer to the chapter ‘Setup of the S70 remote control’ Return to Main Menu by pressing button next to ‘EXIT’ in di
ページ4に含まれる内容の要旨
4
ページ5に含まれる内容の要旨
5
ページ6に含まれる内容の要旨
6
ページ7に含まれる内容の要旨
7
ページ8に含まれる内容の要旨
FIGURE 6 8
ページ9に含まれる内容の要旨
FIGURE 6a 9
ページ10に含まれる内容の要旨
FIGURE 6b 10
ページ11に含まれる内容の要旨
FIGURE 6c 11
ページ12に含まれる内容の要旨
FIGURE 6d 12
ページ13に含まれる内容の要旨
FIGURE 6e 13
ページ14に含まれる内容の要旨
FIGURE 7 14
ページ15に含まれる内容の要旨
FIGURE 8 15
ページ16に含まれる内容の要旨
FIGURE 9 16
ページ17に含まれる内容の要旨
INTRODUCTION Thank you for purchasing the NAD S70 System Remote Control. With the S70 you can control all components of your NAD Silver Series system. The S70 can easily be customised to suit your particular NAD Silver Series system and provides additional functionality such as a clock, Sleep and on/off timer. Although the S70 is primarily meant to complement the NAD Silver Series, it will also function with most remote controlled NAD products from the C Series. To ensure long-term, trouble free
ページ18に含まれる内容の要旨
Press any button (other than Volume Up/Down) to activate the display. In the Main menu, each category of Silver Series component is represented by its own icon. Refer to figure No.2. To set up the S70 for your system: •From the Main Menu on the remote control, press the button next to where it indicates "SYSTEM" in the display. • The display will change to System Set-up Menu. Refer also to figure No.3 • The display will show several components, such as "AMP", "PREAMP", "TUNER", "CD" with corresp
ページ19に含まれる内容の要旨
necessary to adjust contrast. •From the Main Menu, press the button next to "SYSTEM". •Press the button next to ">>" to increase contrast or "<<" to decrease contrast. • When the optimum contrast level has been set, press the button next to "EXIT" to return to Main Menu. USING THE NAD S70 REMOTE CONTROL The NAD S70 is a "menu-driven" remote control, where many of its buttons vary in function, depending on which Menu was selected. The display next to these buttons indicates which functions are av
ページ20に含まれる内容の要旨
menus. • In the Main Menu, press the button next to component displayed you wish to operate, e.g. "AMP". • The appropriate Component Menu and its icon appear in the top of the display, the "AMP" Menu in this example, with all available functions will appear. Press the button next to the function desired in the display. See also figure No. 5. •Press the button next to "EXIT" again to return to the Main Menu from where you can select another component. NOTE: If in System Set-up Menu "S170" was sel
