ページ1に含まれる内容の要旨
K 2.29
English 2
Español 16
Français 32
59639290 10/10
ページ2に含まれる内容の要旨
HIGH PRESSURE WASHER OPERATOR MANUAL Model Overview 3 Owner/User Responsibility Important Safety Instructions 4 The owner and/or user must have an un- Assembly Instructions 6 derstanding of the manufacturer’s oper- Operating Instructions 6 ating instructions and warnings before Using the Accessories 7 using this pressure washer. Warning information should be empha- Working with Detergents 8 sized and understood. Taking a Break 9 If the operator is not fluent in English, Shutting Down & Clean-U
ページ3に含まれる内容の要旨
MODEL OVERVIEW 1 Quick connector for high pressure 11 Wheels hose 12 Water inlet connector 2 High pressure outlet 13 Garden hose connector (female) 3 Detergent suction tube with filter 14 High pressure hose 4 ON/OFF switch 15 Trigger gun 5 Hose/Cord Hook 16 Trigger gun safety lock 6 Transport handle 17 Key to detach high pressure hose 7 Collapsable transport handle from trigger gun ® 8 Trigger Gun Holder 18 Dirtblaster (Rotary spray wand) 9 Power cord with Ground Fault Circuit 19 Vario Power Sp
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS physical injuries to the operator and WARNING When using this product basic precau- irreversible damage to the machine. tions should always be followed, includ- CAUTION ing the following: Gun Kicks Back – Hold with both Read all the instructions before using hands. the product. The Trigger Gun Safety Lock pre- To reduce the risk of injury, close su- vents the trigger from accidentally pervision is necessary when a prod- being engaged. This safety feature
ページ5に含まれる内容の要旨
THIS SYSTEM IS CAPABLE OF protection from the risk of electric shock. PRODUCING 1600 PSI TO AVOID Should replacement of the plug or cord RUPTURE AND INJURY, DO NOT become necessary, use only identical OPERATE THIS PUMP WITH COM- replacement parts that include GFCI PONENTS RATED LESS THAN protection. 1600 PSI WORKING PRESSURE (INCLUDING BUT NOT LIMITED TO WATER SUPPLY SPRAY GUNS, HOSE AND HOSE (Cold Water Only) CONNECTIONS). CAUTION BEFORE SERVICING, CLEANING When connecting the water
ページ6に含まれる内容の要旨
ASSEMBLY INSTRUCTIONS STEP 1: Insert wheels into the body of the unit. Disconnect: Press the disconnect key on the trig- ger gun and remove the high pres- sure hose from the trigger gun. STEP 2: OPERATING Install the supplied connector to the INSTRUCTIONS unit’s water inlet. Note: Never attach the garden hose STEP 1: connector to the unit’s water inlet! Insert the high pressure hose tightly into the quick coupling on the appli- ance, it will lock in audibly. Note: Make sure the connectio
ページ7に含まれる内容の要旨
STEP 3: STEP 6: Screw the supplied garden hose con- Unlock the trigger gun safety lock. nector on to the end of your garden Trigger the gun to eliminate trapped hose. Push the garden hose connec- air, wait for a steady flow of water to tor on to the water inlet connector emerge from the spray nozzle. and make sure you hear it click into place before proceeding. STEP 7: Turn on the high pressure washer (I/ STEP 4: ON). Connect garden hose to the cold wa- The motor starts only if the trigg
ページ8に含まれる内容の要旨
performance of a 0º pencil jet with WORKING WITH the surface coverage of a wide angle DETERGENTS nozzle. Not recommended for soft materi- Detergents can only be applied at low als, siding, painted surfaces, pressure (Min.). decks or autos. STEP 1: Install the Vario Power Spray Wand. Set the spray wand to the low pres- sure setting (Mix). Before cleaning any surface an in- conspicuous area should be cleaned to test spray pattern and distance for maximum cleaning results. STEP 2: Fill
ページ9に含まれる内容の要旨
For best results see Cleaning Tips for SHUTTING DOWN & specific information on how to clean CLEAN-UP different surfaces. ® Always Use Kärcher Detergent for STEP 1: Best Results Turn the switch to OFF (0) position ® Kärcher biodegradable detergents are and unplug cord from outlet. specially formulated to protect the envi- ronment and your pressure washer. The special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a longer ® lif
ページ10に含まれる内容の要旨
weather damage during storage in the winter months. CARE AND MAINTENANCE INSTRUCTIONS Cleaning the water inlet filter STEP 6: STEP 1: Push the housing of the quick con- Disconect the connector from the nector for the high pressure hose to- water inlet. ward the rear and disconnect the STEP 2: high pressure hose from the unit. Pull out water inlet filter with flat-nose pliers. STEP 3: WINTERIZING AND Rinse out water inlet filter in warm LONG-TERM STORAGE water. STEP 4: 1: Disconnect a
ページ11に含まれる内容の要旨
6 feet and always apply detergent from CLEANING TIPS bottom to top). Allow detergent to re- main on surface 1-3 minutes. Do not al- CAUTION Before cleaning any surface an in- low detergent to dry on surface, if conspicuous area should be cleaned surface appears to be drying, simply wet to test spray pattern and distance for down surface with fresh water. If need- maximum cleaning results. ed, use special wash brush attachment If painted surfaces are peeling or (not included) to remove st
ページ12に含まれる内容の要旨
(distance should increase when rinsing OPTIONAL CLEANING pin-striping or other sensitive surfaces). ACCESSORIES Always clean from top to bottom and from left to right. For best results, wipe Optional accessories are available to surface dry with a chamois or soft dry further enhance your cleaning capabili- cloth. ties. These accessories are accurate as of the printing date of this manual. Barbecue Grills, Outdoor Power Please check our website for pricing and Equipment & Gardening To
ページ13に含まれる内容の要旨
siding or windows. The water pressure washer, add abrasive material and at- from your pressure washer causes the tack the rust and paint with our eco- ® inner brushes to gently spin, making friendly alternative. Fits most Kärcher your cleaning job much easier. The an- pressure washers up to 2300 PSI. (bay- gle of brush head is adjustable to help onet) you reach difficult areas. Excellent for Part No. 2.638-792.0 the application of detergent. A must- ® have accessory designed for Kärcher Deterge
ページ14に含まれる内容の要旨
TROUBLESHOOTING CAUTION Disconnect the machine from the power source before making any repair. Symptom Cause Solution Motor will not start On/Off switch is in the “OFF” Turn switch to the “ON” (I) (0) position. position Power cord is not plugged in. Plug in power cord. Electrical outlet does not Try a different outlet. supply adequate power. Tripped GFCI plug. Press “RESET” button on GFCI plug. Tripped circuit breaker. Switch off pressure washer. The reset comes automatically once the tem
ページ15に含まれる内容の要旨
Symptom Cause Solution No detergent. Detergent suction tube not Check connection. properly connected to the machine. Detergent is too thick. Dilute detergent, for best re- ® sults use Kärcher detergent. Filter on detergent suction Run warm water through filter tube is clogged. to remove debris. Damaged or clogged Remove obstruction or replace detergent suction tube. detergent suction tube. Spray wand is in high pressure Turn spray wand tip to low position. pressure position. Discharge nozzl
ページ16に含まれる内容の要旨
MANUAL DE USUARIO DEL LIMPIADOR DE ALTA PRESIÓN Vista general del modelo 17 Responsabilidades del Instrucciones de seguridad 18 propietario/usuario Instrucciones de montaje 20 El propietario y/o el usuario deben com- Instrucciones de funcionamiento 20 prender bien las instrucciones de servi- Utilicación de los accesorios 22 cio y advertencias del fabricante antes de empezar a utilizar este limpiador de Trabajar con detergentes 22 alta presión. Tomarse un descanso 23 Debe prestarse especial at
ページ17に含まれる内容の要旨
VISTA GENERAL DEL MODELO 1 Acoplamiento rápido para manguera 12 Pieza de acoplamiento para la co- de alta presión nexión de agua 2 Salida de alta presión 13 Conector para manguera de jardín 3 Manguera de succión de detergente (female) con filtro 14 Manguera de alta presión 4 Interruptor de encendido/apagado 15 Pistola de disparo 5 Soporte para manguera/cable 16 Pestillo de seguridad de la pistola de 6 Asa de transporte disparo 7 Agarradera 17 Tecla para separar la manguera de 8 Zona de recogi
ページ18に含まれる内容の要旨
INSTRUCCIONES IMPORTANTES DE SEGURIDAD ADVERTENCIA ADVERTENCIA Al utilizar este producto, tome siempre Riesgo de explosión - no pulverizar las precauciones básicas, incluidas las sobre líquidos inflamables. siguientes: No usar ácidos, alcalinos, disolven- Lea todas las instrucciones antes de tes, o cualquier material inflamable usar el producto. con este producto. Estos productos Para reducir el riesgo de lesiones, es pueden causar heridas físicas al preciso vigilar atentamente si se
ページ19に含まれる内容の要旨
MANTENIMIENTO DE LOS SUMINISTRO DE AGUA EQUIPOS DOTADOS DE DOBLE (sólo agua fría) AISLAMIENTO ATENCIÓN Un aparato dotado de doble aislamiento Al conectar la toma de agua a la red de incorpora dos sistemas de aislamiento suministro del agua, es obligatorio res- en lugar de la puesta a tierra. Es decir, petar la normativa local establecida por los equipos dotados de doble aislamien- la compañía del agua. En algunas zo- to no incorporan ningún conductor ni nas, está prohibido conectar la unida
ページ20に含まれる内容の要旨
Nota: Procurar que el racor de co- INSTRUCCIONES DE nexión esté alineado correctamente. MONTAJE Comprobar si la conexión es segura tirando de la manguera de alta pre- PASO 1: sión. Colocar y encajar las ruedas en el alojamiento para los ejes. Desconecte: Pulsar el botón de desconexión en la PASO 2: pistola pulverizadora manual y des- Instalar el conector suministrado a la conectar manguera de alta presión toma de agua del equipo. de la pistola pulverizadora manual. Nota: No sujetar nunc
