ページ1に含まれる内容の要旨
Master Page : Right
3-065-677-11 (1) GB
Video Cassette
Recorder
Operating Instructions
PAL
SLV-SE610G
SLV-SE710G
SLV-SE710I
SLV-SE810G
© 2001 Sony Corporation
filename[010cov.fm] model name1[SLV-SE610G] model name2[SLV-SE710G]
model name3[SLV-SE710I] model name4[SLV-SE810G]
[3-065-677-11 (1) GB]
ページ2に含まれる内容の要旨
Master Page : Left Installing WARNING Allow adequate air circulation to prevent internal To prevent fire or shock hazard, do not expose the heat buildup. unit to rain or moisture. Do not place the unit on surfaces (rugs, blankets, To avoid electrical shock, do not open the cabinet. etc.) or near materials (curtains, draperies) that Refer servicing to qualified personnel only. may block the ventilation slots. Do not install the unit near heat sources such as Mains lead must only be ch
ページ3に含まれる内容の要旨
Getting Started Master Page : Right Table of contents Getting Started Additional Operations 56 Playing/searching at various speeds 4 Index to parts and controls 58 Setting the recording duration time 10 Step 1 : Unpacking 59 Synchronized Recording 11 Step 2 : Setting up the remote (not available on SLV-SE610G) commander 61 Checking/changing/cancelling 15 Step 3 : Connecting the VCR timer settings 19 Step 4 : Setting up the VCR with 63 Recording stereo and bilingual the Auto Set Up function
ページ4に含まれる内容の要旨
Getting Started Index to parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel SLV-SE810G A?/1 (on/standby) switch (36) M DIAL TIMER (43) B Tape compartment N PROGRAM +/– buttons (22) (57) (73) C Remote sensor (11) O AUDIO DUB button (82) DA (eject) button (38) P AUTO SET UP/RF (Radio E Shuttle ring (56) Frequency) CHANNEL button (19) (21) FH (play) button (38) (56) Q SYNCHRO REC (Synchronized G JOG button (57) Recording) button (59) Hz REC (record)
ページ5に含まれる内容の要旨
Getting Started Master Page : Right SLV-SE610G, SE710G, SE710I A?/1 (on/standby) switch (36) IM (fast-forward) button (38) (56) B Tape compartment Jm (rewind) button (38) (56) C Remote sensor (11) K PROGRAM +/– buttons (22) (57) (73) DA (eject) button (38) L AUTO SET UP/RF (Radio EH (play) button (38) (56) Frequency) CHANNEL button (19) (21) Fz REC (record) button (40) (58) (81) M SYNCHRO REC (Synchronized Recording) button* (59) GX (pause) button (38) (81) Hx (stop) button (38) (81) * n
ページ6に含まれる内容の要旨
Master Page : Left Display window STEREO NICAM VIDEO VPS SPLP OPC SYNCHRO PDC EP TV RR 1 A Timer indicator (45) (50) (53) J TV indicator* (42) 1 2 B SYNCHRO indicator* (60) K Audio dubbing indicator* (82) C STEREO indicator (63) L Tracking indicator (73) D NICAM indicator (63) M Time counter/clock/line/programme position indicator (38) (40) (81) 1 E (smartlink) indicator* (17) N Remaining time indicator (40) F VIDEO indicator (16) (41) O RR (Reality Regenerator) indicator G VPS (Video Program
ページ7に含まれる内容の要旨
Getting Started Master Page : Right Rear panel A Mains lead (15) (16) D AERIAL OUT ANTENNE SORTIE connector (15) B t LINE-2 IN (16) 1 t ENTREE LIGNE-2 connector* (18) (59) (80) E i LINE-1 (TV) i LIGNE-1 (TV) connector (16) t LINE-3 IN (79) 2 t ENTREE LIGNE-3 connector* (18) (59) (80) F (audio out) R/D (right) L/G (left) 3 jacks* (18) C AERIAL IN ANTENNE ENTREE connector (15) (16) 1 * SLV-SE710G, and SE710I only 2 SLV-SE810G only * 3 * not available on SLV-SE610G continued Index to parts
ページ8に含まれる内容の要旨
Master Page : Left Remote commander AZ EJECT button (38) B WIDE button (for TV) (13) C AUDIO MONITOR button (63) 1 D ×2 button* (56) 1 (56) Ey SLOW button* F SP (Standard Play)/LP (Long Play) button (40) G DISPLAY button (40) H - (ten’s digit) button (12) (41) I2 (volume) +/– buttons (for TV) (13) Jz REC (record) button (40) (58) 123 K MENU button (32) (61) 456 LX PAUSE/M button (32) (38) 789 x STOP/m button (32) (38) m REW (rewind)/< button (38) 0 (56) M FF (fast-forward)/, button (38) (56
ページ9に含まれる内容の要旨
Getting Started Master Page : Right M[TV] / [VIDEO] remote control switch (11) N?/1 (on/standby) switch (12) (50) O COUNTER/REMAIN button (40) 2 / (Teletext) button* (for TV) (13) P a TV power on/TV mode select 2 button* (for TV) (12) Q./> INDEX SEARCH 1 buttons* (72) R CLEAR button (38) (49) (61) S t TV/VIDEO button (12) (16) (41) T Programme number buttons (12) (41) U INPUT SELECT button (41) (53) (81) 123 V PROG (programme) +/– buttons (12) 456 (25) (40) 789 2 c/C Teletext page access
ページ10に含まれる内容の要旨
Master Page : Left Step 1 : Unpacking Check that you have received the following items with the VCR: Remote commander Aerial cable R6 (size AA) batteries Check your model name The instructions in this manual are for the 4 models: SLV-SE610G, SE710G, SE710I, and SE810G. Check your model number by looking at the rear panel of your VCR. SLV-SE810G is the model used for illustration purposes. Any difference in operation is clearly indicated in the text, for example, “SLV-SE610G only.” U
ページ11に含まれる内容の要旨
Getting Started Master Page : Right Step 2 : Setting up the remote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position. Using the remote commander You can use this remote Remote sensor commander to operate this VCR and a Sony TV. Buttons on the remote commander marked with a do
ページ12に含まれる内容の要旨
Master Page : Left ?/1 WIDE / a AUDIO MONITOR FASTEXT buttons DISPLAY t TV/VIDEO 123 Programme 456 number 789 buttons - 0 PROG +/–/ c/C 2 +/– TV control buttons To Press Set the TV to standby mode ?/1 Select an input source: aerial in or line in t TV/VIDEO Select the TV’s programme position Programme number buttons, -, PROG +/– Setting up the remote commander 12 filename[010get.fm] model name1[SLV-SE610G] model name2[SLV-SE710G] model name3[SLV-SE710I] model name4[SLV-SE810G] [3-065-677-1
ページ13に含まれる内容の要旨
Getting Started Master Page : Right To Press Adjust the volume of the TV 2 +/– Switch to TV (Teletext off)* a (TV) Switch to Teletext* / (Teletext) Select the sound AUDIO MONITOR Use FASTEXT* FASTEXT buttons Call up the on-screen display DISPLAY Change the Teletext page* c/C Switch to/from wide mode of a Sony wide TV (For WIDE other manufactures’ wide TVs, see “Controlling other TVs with the remote commander (SLV-SE810G only)” below.) Notes With normal use, the batteries should last about
ページ14に含まれる内容の要旨
Master Page : Left Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. To switch to wide mode, see the footnotes below this table for the applicable code numbers. Manufacturer Code number Manufacturer Code number 1 3 Sony 01* , 02 Nokia 15, 16, 69* 1 Akai 68 Panasonic 17* , 49 1 1 1 Ferguson 52 Philips 06* , 07* , 08* 1 1 Grundig 10* , 11* Saba 12, 13 Hitachi 24 Samsung 22, 23 JVC 33 Sanyo 25 L
ページ15に含まれる内容の要旨
Getting Started Master Page : Right Step 3 : Connecting the VCR If your TV has a Scart (EURO-AV) connector, see page 16. If your TV does not have a Scart (EURO-AV) connector AERIAL IN AERIAL OUT Mains lead AERIAL IN to mains Aerial cable (supplied) : Signal flow Disconnect the aerial cable from AERIAL 1 ANTENNE your TV and connect it to IN ENTREE AERIAL IN on the rear panel of OUT the VCR. SORTIE AERIAL Connect AERIAL OUT of the ANTENNE 2 IN VCR and the aerial input of your ENTREE TV using t
ページ16に含まれる内容の要旨
Master Page : Left If your TV has a Scart (EURO-AV) connector AERIAL IN i LINE-1 AERIAL OUT (TV) Mains lead AERIAL IN to mains Aerial cable (supplied) Scart (EURO-AV) : Signal flow Scart cable (not supplied) Disconnect the aerial cable from AERIAL ANTENNE 1 your TV and connect it to IN ENTREE AERIAL IN on the rear panel of the VCR. OUT SORTIE AERIAL Connect AERIAL OUT of the ANTENNE 2 IN VCR and the aerial input of your ENTREE TV using the supplied aerial cable. OUT SORTIE Connect LINE-1 (
ページ17に含まれる内容の要旨
Getting Started Master Page : Right About the SMARTLINK features (not available on SLV-SE610G) If the connected TV complies with 1 SMARTLINK, MEGALOGIC* , 2 3 EASYLINK* , Q-Link* , EURO 4 5 VIEW LINK* , or T-V LINK* , this VCR automatically runs the SMARTLINK function after you complete the steps on the previous page (the indicator appears in the VCR’s display window when you turn on the TV). You can enjoy the following SMARTLINK features. Preset Download You can download your TV tun
ページ18に含まれる内容の要旨
Master Page : Left Note Not all TVs respond to the functions above. Additional connections To a stereo system (not available on SLV-SE610G) R/D L/G You can improve sound LINE IN quality by connecting a stereo system to the R/D L/G jacks as shown on the right. Audio cable (not supplied) : Signal flow To a set top box with Line Through (not available on 1 SLV-SE610G) t LINE-3 IN* LINE OUT or Using the Line Through 2 t LINE-2 IN* function, you can watch programmes from a set top box
ページ19に含まれる内容の要旨
Getting Started Master Page : Right Step 4 : Setting up the VCR with the Auto Set Up function Before using the VCR for the first time, set up the VCR using the Auto Set Up function. With this function, you can set the TV channels, guide channels for the VIDEO Plus+ system*, RF cheannel, and VCR clock* automatically. AUTO SET UP AUTO Hold down AUTO SET UP on the VCR for more than three SET UP seconds. The VCR automatically turns on, and starts searching for all of the RF CHANNEL receivab
ページ20に含まれる内容の要旨
Master Page : Left Notes If you stop the Auto Set Up function during step 3, you must repeat set up from step 1. Whenever you operate the Auto Set Up function, some of the settings (VIDEO Plus+*, timer, etc.) will be reset. If this happens, you have to set them again. * not available on SLV-SE610G Setting up the VCR with the Auto Set Up function 20 filename[010get.fm] model name1[SLV-SE610G] model name2[SLV-SE710G] model name3[SLV-SE710I] model name4[SLV-SE810G] [3-065-677-11 (1)]
