ページ1に含まれる内容の要旨
™
Radius 1000
Featuring:
SSaammpplliinngg
User Guide and Reference Manual
6122 S. Eastern Ave.
Los Angeles Ca. 90040
Rev. 3/10
www.AmericanAudio.us
ページ2に含まれる内容の要旨
CONTENTS Safety regulationS.........................................................................................................................3 electrical precautionS................................................................................................................4 Safety inStructionS.......................................................................................................................5 cuStomer Support.................. ......................................
ページ3に含まれる内容の要旨
ImpORTANT INfORmATION IMPORTANT SAFETY ITEMS FOR CAUTION TO PREVENT ELECTRIC SHOCK DO NOT USE THIS U.S.A. & CANADA MODEL ONLY (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES NOTE: CAN BE CAREFULLY INSERTED TO PREVENT BLADE This CD player uses a semiconductor laser. It EXPOSURE is recommended for use in a room at the fol- lowing temperature: 41˚F - 95˚F / 5˚C - 35˚C CAUTION: USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT
ページ4に含まれる内容の要旨
ELECTRICAL SAfETY pRECAUTIONS ELECTRICAL pRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an CAUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an equilateral triangle is equilateral triangle, is intended to alert the user to the SHOCK, DO NOT REMOVE THE COVER (OR BACK). intended to alert the user to the presence of important presence of uninsulated "dangerous voltage" within the THERE ARE NO USER SERVICEABLE PARTS operat
ページ5に含まれる内容の要旨
SAfETY INSTRUCTIONS I. Read Instructions - All the safety and operat- The serial and model number for this unit is ing instructions should be read before the CD located on the rear panel. Please write down Player is operated. The safety and operating the numbers here and retain for future refer- instructions should be saved for future ence. reference. Model No._____________________________ 2. Heed Warnings - All warnings on the CD Player and in the operating instructions Serial No._
ページ6に含まれる内容の要旨
UNpACk INg Every Radius 1000™ has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your CD player for any damage and be sure all equipment necessary to operate the CD player has arrived intact. In the event damage has been found or parts are missing, please contact our toll free customer support number for further instructio
ページ7に含まれる内容の要旨
mAIN fEATURES • Plays Mp3, CD, and CD-R Discs • Mp3 Track Listings • Slot Loaded CD • Folder Search for Mp3's • Fine Tune BPM (See page 28) • Advanced Track Search (See page 33) • Auto cue • Real Time Scratch Play • 1/75th second frame search • Reverse Play • Real time cue (“Cue on the Fly”) • Pan Effect • 8 different speed scan (4 Forward/4 Reverse) • Skid Effect • Pitch display • Filter Effect • Digital RCA coaxial output • Phase Effect • Large bri
ページ8に含まれる内容の要旨
SET-Up fOR BEST CD-R DISC pLAYBACk RESULTS IN THIS CD pLAYER pLEASE fOLLOW THESE gUIDELINES: 1. High quality CD-R Audio discs (should conform to the standards of the Orange Book 2). 2. Use a high quality bit rate when recording discs. (At least 160kbps) 3. Record discs in the slowest speed possible. (i.e. 2x or 4x speed) 1. Checking the Contents Be sure your Radius 1000™ was shipped with the following: 1) Radius 1000™ Professional CD player. 2) User Guide and Reference Manua
ページ9に含まれる内容の要旨
gENERAL fUNCTIONS AND CONTROLS Figure 3 1 20 2 19 18 3 17 16 4 15 5 6 7 8 9 14 10 13 11 12 21 30 29 22 28 23 24 25 27 26 ©American Audio® - www.AmericanAudio.us - Radius 1000™ Instruction Manual Page 9
ページ10に含まれる内容の要旨
gENERAL fUNCTIONS AND CONTROLS (Cont.) A. TOp UNIT CONTROLS ( fIgURE 3) 1. EJECT fUNCTION - Pressing this will eject the CD. The eject function will only when the unit is in cue or pause mode, this is to prevent accidentally ejecting the disc when in play mode. 2. VfD DISpLAY - This high quality VFD display indicates all the functions, as they are occurring. The display ICONS will be explained in the section C. 3. pITCH SLIDER - This slider is used to adjust the playback pitch percentage. T
ページ11に含まれる内容の要旨
gENERAL fUNCTIONS AND CONTROLS (Cont.) and set effect and sample parameters, see page 24. 10. Bpm BUTTON - Press this button to switch between manual BPM and Auto BPM. 11. TAp BUTTON - This button is used for manual BPM. When in manual BPM mode, press this button and turn either the time (28) or ratio (23) knobs to adjust the BPM 12. JOg WHEEL Eff ECTS AND CONTROLS NORMAL BUTTON - Press this button to exit SCRATCH mode. When SCRATCH mode is not active the jog W heel (9) can be used to pitch
ページ12に含まれる内容の要旨
gENERAL fUNCTIONS AND CONTROLS (Cont.) 17. f AST TRACk BUTTONS - This button is used to select a track. Tapping this button will forward skip to the next track, holding down this button will rapidly forward skip through the tracks. This button is used to select a track. Tapping this button will back skip on track, holding down this button will rapidly BACK SKIP through the tracks. 18. ADV. TRACk BUTTON - While either playing a track or in pause mode, press this butt
ページ13に含まれる内容の要旨
gENERAL fUNCTIONS AND CONTROLS (Cont.) HOLD BUTTON - This button has two functions: parameter Lock: This button allows you to lock any new parameter settings you set to the ef- fects. The button LED will glow red when the hold function is not selected. When the hold selec- tion is not active, any changes to the effect parameters will be momentay. System Lock: If you press and hold the button for 5 seconds you will activate the System Lock. The button LED will flash when the HOLD
ページ14に含まれる内容の要旨
gENERAL fUNCTIONS AND CONTROLS (Cont.) 31 Figure 4 37 36 35 34 33 32 B. REAR pANEL (fIgURE 4) 31. pOWER CONNECTOR - This connection is used to connect your main power. Be sure that your local power matches the unit’s required power. 32. pOWER BUTTON - This button is used to turn your unit’s power on and off. 33. RELAY JACk - With this jack you can connect two CD players and relay (flip flop) play. You can also connect your unit to a compatible American Audio® mixer’s CONTROL out, to use Amer
ページ15に含まれる内容の要旨
gENERAL fUNCTIONS AND CONTROLS (Cont.) 39 38 40 41 42 57 56 55 43 54 44 53 52 51 50 49 48 46 45 47 Figure 5 C. VfD DISpLAY pANEL (fIgURE 5) 38. pLAY INDICATOR - The play indicator will glow when the unit is in play mode. 39. pAUSE INDICATOR - The pause indicator will glow when the unit is in pause mode. 40. CUE INDICATOR - This indicator will glow when the unit is in CUE mode and will flash every time CUE a new CUE POINT is set. CD MP3 41. CHARACTER DISpLAY - This will display the name of the
ページ16に含まれる内容の要旨
gENERAL fUNCTIONS AND CONTROLS (Cont.) 51. fOLDER DISpLAY - This indicator describes which folder you are in. 52. RELOOp INDICATOR - Appears when LOOP is engaged or ready to be engaged. 53. SINgLE INDICATOR - This indicates that the CD drive is in single play mode, the track will play once and return to CUE mode. If the single indicator is not on the unit is in continuous mode In con- tinuous mode the drive will play all the remaining tracks on the disc. Once the remaining tracks have ende
ページ17に含まれる内容の要旨
INTERNAL mENU Press and hold the folder knoB (20) for at least 2 sec. to enter the internal menu. Press the time (28) or ratio (23) knoBS to enter the submenus and to confirm setting; press the folder knoB (20) to exit the menu. 1. JOg mODE - Select JOG LED mode (mode range is 1~8) 2. Sensitivity - Touch Wheel Sensitivity Adjustment (Adjustment range is -20~+20) 3. pitch Bend - Pitch range +/-1%~100% 4. Display Time - Range is 0.5~12.0 sec.(LINE NAME start / stop time adjustment) 5. Scroll Spee
ページ18に含まれる内容の要旨
BASIC OpERATIONS 1. LOADINg/EJECTINg DISCS The Radius 1000™ can only play regular 5 inch CDs. 3 inch, odd shaped, and oval CDs are not compatible. When loading a CD into the player always hold the disc by it edge. Load the disc label side up and slide it in the disc slot. Never touch the signal surface (the glossy side). To remove a disc from the slot press the eject Button (1) . CAUTION: • NEVER attempt to insert any other objects beside 5" CD in the disc slot. • NEVER attempt to insert m
ページ19に含まれる内容の要旨
BASIC OpERATIONS (CONT.) 3. STARTINg pLAYBACk - Figure 9 Insert an audio CD as described on page 18 (loading/ejecting diScS ). Pressing the play/pauSe Button (28) with an audio CD loaded will imme- diately start playback. The play (42) indicator will glow as soon as playback begins. The point at which playback starts (cue point) will automatically be stored in the memory as the cue point. The unit will return to this cue point (the point at which playback started) when the cue Button (14)
ページ20に含まれる内容の要旨
BASIC OpERATIONS (CONT.) 8. SCANNINg (f AST fORWARD / fAST REVERSE) This function gives you a fast search through a track. Press the Search ButtonS (16) for a fast forward or a fast reverse. Figure 12 9. SETTINg and STORINg a CUE pOINT: Setting A Cue Point: A cue point is the exact point playback will begin when the play/pauSe button (13) is pressed. You may set your cue points anywhere on a disc or in a track. You may set up to three independent cue points per disc. Three cue points are
