ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
INDEX How To Use This Manual Page 1 Kit Information , Page 2 Universal and Impor1 Car Installations Pages 3,4 Chevrolet -Oldsmobile-Pontiac-Bu ick -G MC-Cadillac-Satu m Installations Pages 5,6 Ford-Lincoln-Mercury Installations Pages 7,8 Chrysler-Dodge-Plymouth Installations Page 9 Radio Wiring Page 10 Speaker Wiring- 2 Speaker Systems Page 11 4 Speaker Systems Page 12 Operating Instructions Pages 13,14 Specifications Page 15 Troubleshooting Page 16 Care and Maintenance Page 17 Warranty Back Cov
ページ3に含まれる内容の要旨
KIT INFORMATION 1. The years shown in the Kit Listing below are approximate. Always check the application chart at your retail store to find information on your specific make, model, and year of vehicle. If a kit is required, read the description on the kit you intend to purchase to make sure it applies to your vehicle. If you have any doubts or questions, call our toll-free "HELP" line. 2. The kits shown below are Audiovox kits. Your retailer may sell kits made by other manufacturers which may
ページ4に含まれる内容の要旨
UNIVERSAL INSTALLATION FOR VEHICLES WITH AN EXISTING RADIO OPENING This installation is designed for cars, trucks, vans, and boats that have an existing radio opening. It can also be used as an option on some of the vehicles listed as requiring the AX-88-SNP kit. It will not work on all vehicles, but can be used on most newer Fords and many imports. 1. Inspect Ole Existing Radio Opening: A. Use the trimplate supplied with the radio to cover the existing opening. If it completely covers the openi
ページ5に含まれる内容の要旨
UNIVERSAL INSTALLATION FOR VEHICLES WITHOUT AN EXISTING RADIO OPENING This installation is designed for cars, trucks, vans, and boats that do not have an existing radio opening. It will require cutting an opening in a surface of the vehicle, so it is important to mark and measure carefully. 1. Select III. ...nUng Area: A. Using the trimplate supplied, verify that there will be sufficient space on the selected mounting surface. B. Check that there will be sufficient space behind the dashboard for
ページ6に含まれる内容の要旨
CHEVROLET -OLDSMOBlLE-BUICK-PONTIAC-GMC-CADILLAC INSTALLATION 1981 AND OLDER ImQortant- This installation is designed for 1981 and older U.S. made GM cars, trucks, and vans. For 1981 and newer vehicles, an installation kit may be required. See Kit Listing on Page 2 of this manual or refer to the in-store application chart. If a kit is not required, use the following instructions. 1. Remove Existing Radio: A. Remove radio knobs and shaft nuts behind the knobs. B. Locate and remove support brace a
ページ7に含まれる内容の要旨
CHEVROLET -OLDSMO BILE- BUICK -PONT IAC- GMC-CADILLAC-SATU INSTALLATION 1982 AND NEWER ImRortant- This installation is designed for most 1982 and newer GM cars, trucks, and vans where an installation kit is required. See Kit Listing on Page 2 of this manual or refer to the in-store application chart. If a kit is not required, use the instructions on Page 5. 1. R...V8 Existing Radio: A. Remove the existing dashboard trimpanel surrounding the radio opening. This panel is usually secured by screws
ページ8に含まれる内容の要旨
FORD-LINCOLN-MERCURY INSTALLATION -1984 AND OLDER ImQortant- This installation is designed for 1984 and older U.S. made Ford cars, trucks, and vans. For newer vehicles, an installation kit may be required. See Kit Listing on Page 2 of this manual or refer to the in-store chart. 1. Renlove Existing Radio: A. Remove radio knobs and shaft nuts behind the knobs. B. Locate and remove support brace at back of radio. C. Push radio back into dashboard to access the wiring and antenna cables plugged into
ページ9に含まれる内容の要旨
FORD-LINCOLN-MERCURY INSTALLATION -1985 AND NEWER ImRortant- This installation is designed for most 1985 through 1990 U.S. made Ford cars, and vans and an installation kit is required forthese vehicles. See Kit Listing on Page 2 of this manual or refer to the in-store application chart. For 1991 and newer vehicles, the radio can be installed as shown on Page 3 of this manual or you can use theAX-88-SNP kit. Instructions for use oftheAS-88-SNP kit are included with the kit and are not shown inthi
ページ10に含まれる内容の要旨
CHRYSLER-DODGE-PLYMOUTHINSTALLATION ALL U.S. MADE CARS, TRUCKS, AND VANS BUILT SINCE 1974 ImRortant- This radio cannot be installed in any U.S. made Chrysler, Dodge, or Plymouth vehicle without an installation kit. Refer to the Kit Listing on Page 2 for the required kit. Complete kit installation is explained in the instructions included with the kit. A. Remove the existing dashboard trimpanel surrounding the radio opening. This panel is usually secured by screws and/or snap-in clips. B. Remove
ページ11に含まれる内容の要旨
RADIO WIRING REFER TO PAGE 11 OR 12 FOR SPEAKER WIRING
ページ12に含まれる内容の要旨
SPEAKER WIRING -2 SPEAKER SYSTEMS REFER TO PAGE 10 I FOR RADIO WIRING ~I
ページ13に含まれる内容の要旨
SPEAKER WIRING -4 SPEAKER SYSTEMS REFER TO PAGE 10 FOR RADIO WIRING I
ページ14に含まれる内容の要旨
OPERATING INSTRUCTIONS CD ON-OFF SWITCHNOLUME CONTROL Turn this knob to the right to turn the unit on. the selected radio band indicator appears on Continue rotation until the desired volume the display panel. level is obtained. @ LOCAL-DIST ANT SWITCH
ページ15に含まれる内容の要旨
"' "' I ~ @) MANUAL TUNING CONTROL @ CASSETTE SLOT j Turn the knob either to the left or the right to Hold a cassette with the exposed tape edge to I " 11 select a radio station . the right, then insert into the cassette slot. Depress fully until the cassette is engaged and I CD ANTENNA TRIMMER ~ begins playing. When the cassette reaches the It is very important to adjust the ANTENNA end of play, the unit will automatically change TRIMMER for optimum AM reception. The an- over to radio operation
ページ16に含まれる内容の要旨
SPECIFICATIONS Size: 7" W x 2" H x 5" D 178mm x 50mm x 125mm 12 volts DC, negative ground Operating Voltage: Output Power: 14 watts maximum ( 7 watts x 2 channels) Output Wiring: Common-ground type designed for 2 speaker use. May also be used with 4 speakers. Compatible with 4-8 ohm speakers Output Impedance: AM: 530-1,620 KHz. Tuning Range: FM: 87.5-107.9 MHz. AM: 15 uv. Sensitivity: FM: 2.5 uv. FM Stereo Separation: 30dB Tape Frequency Response: 50-10,000 Hz. Tape SIN Ratio: SOdB Wow & Flutter
ページ17に含まれる内容の要旨
PROBABLE CAUSE CHECK FOLLOWING PROBLEM i Orange/White stripe wire to +12V ACC. Unit completely inoperative no lights, I and Green/White stripe wire to + 12V Incorrect power connection no sound battery Check fuses in wires listed above and Blown fuse check car fuse block Green/White Stripe wire is not con- Unit will not keep time or Radio Incorrect power connection nected to a 'live' + 12V battery source station memory (Electronic Tuning Radios Only) Check fuse in Green/White stripe wire Blown fu
ページ18に含まれる内容の要旨
CARE AND MAINTENANCE The radio por1ion of your new sound system does not require any maintenance. We recommend you keep this manual for general reference of the many features found in this unit. As with any cassette player, the cassette section of this sound system does require a minimum of maintenance to keep it in good working condition. The following simple care and maintenance suggestions should be followed to prevent malfunctions of the cassette system. Cassette Care: 1. Purchase a cassette
ページ19に含まれる内容の要旨
12 MONTH LIMITED WARRANTY Applies to In-dash radios, radio/tape pla)'erand radio/CD pla)'ercombinations, and CD Changers. AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) wi
