ページ1に含まれる内容の要旨
2002MY NAS Audio System Handbook
ページ2に含まれる内容の要旨
Foreword Audio System Handbook JAGUAR CARS LIMITED, as manufacturer, is To cover changes, it is sometimes necessary to issue one or dedicated to the design and production of vehicles which meet more handbook supplements. When reading this handbook, the expectations of the world’s most discerning purchasers. check the owner literature for possible supplements. This handbook forms part of the owner literature supplied with For full details of the owner literature originally supplied with your v
ページ3に含まれる内容の要旨
Contents 1. Introduction General information . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1 Cassette tape model controls . . . . . . . . . . . . . . . . . . . .1-2 Single CD model and MiniDisc (MD) model controls. . .1-3 2. Controls and operation Steering wheel controls (where fitted). . . . . . . . . . . . . .2-1 Audio system display panel (in AM/FM mode). . . . . . . .2-1 Radio operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2 RBDS trouble-shooting guide . . .
ページ4に含まれる内容の要旨
1Introduction Introduction 1-1 General information This Handbook describes every option and model variant. Some of the items covered may therefore not apply to your particular vehicle. The vehicle Audio system interacts with the Voice Activation, In-car Phone and Emergency Message (JaguarNet) systems via data on the multiplex communications vehicle network. The audio system can be controlled from either the radio panel or multi-function controls on the left-hand side of the steering wheel.
ページ5に含まれる内容の要旨
1-2 Introduction Cassette tape model controls 1. Dolby B noise reduction (cassette tape model). 2. REPEAT. Repeat current track of CD or repeat CD. 3. Audio system display. 4. Station preset buttons (1 to 9) and phone key pad. 5. Seek a stored number in the phone memory. 6. MIX. Mix CDs or CD tracks. 7. PTY. Priority programme type (where broadcast). 8. TA. Radio Broadcast Data System (RBDS). 9. AMEM. Automatically set station presets. 10. Seek a stored number in the phone 15. Seek AM/FM
ページ6に含まれる内容の要旨
Introduction 1-3 Single CD model and MiniDisc (MD) model controls 1. Mute. Mutes audio. 2. REPEAT. Repeat current track of CD/MD or repeat CD/MD. 3. Audio system display. 4. Station preset buttons (1 to 9) and phone key pad. 5. Seek a stored number in the phone memory. 6. MIX. Mix CDs or CD/MD tracks. 7. PTY. Priority programme type (where broadcast). 8. TA. Radio Broadcast Data System (RBDS). 9. AMEM. Automatically set station presets. 10. Seek a stored number in the phone memory. 11. CD
ページ7に含まれる内容の要旨
ページ8に含まれる内容の要旨
2 Controls and operation Controls and operation 2-1 3. Press and release to cycle through Radio FM, AM, Cassette, CD or MD and CD Changer, or press and hold for at least two seconds to select Phone Ready mode. 4. Press upper or lower part of rocker switch and release to cycle through preset radio stations, the next CD/MD track or tape AMS (Automatic Music Search). Audio system display panel Press and hold for at least two (in AM/FM mode) seconds to cycle to next strong ST Stereo. stat
ページ9に含まれる内容の要旨
2-2 Controls and operation Radio operation Reception MODE button FM reception offers the advantages of low The MODE button functions at two levels noise interference, minimal distortion, and is primarily used to adjust sound wide dynamic range, extended frequency quality to personal preference. response, and is usually broadcast in In addition, it is used to adjust Voice stereo. FM frequency waves are however On/Off and volume control Activation volume, select Voice relatively short an
ページ10に含まれる内容の要旨
Controls and operation 2-3 DSP Setting Seating Positions Mode level 2 Setting the audio display clock With a mode selected, adjust the volume Press and hold MODE button until 1. Press and hold the MODE button control knob to the desired level. TA VOLUME is displayed, then until TA VOLUME is displayed. After approximately five seconds the repeatedly press and release to scroll to 2. Repeatedly press and release the audio system will return to normal the following displays as required: MODE but
ページ11に含まれる内容の要旨
2-4 Controls and operation Source tone memory Bass and Treble positions are automatically memorised for AM radio, Seek and manual tuning FM radio, cassette tape and CD/MD, In AM/FM mode, pressing and releasing allowing individual settings for each the left or right button will activate the mode. Presetting memorised radio stations radio in seek mode, tuning through the Change audio system source frequency range to the next available station. Pressing either button for more ! WARNING: th
ページ12に含まれる内容の要旨
Controls and operation 2-5 If stations cannot be located for all preset • RBDS Station/Programme type display positions, those that are found will be and search: allocated positions commencing with RBDS displays information on the type RBDS operation number 1, leaving the remainder not of material broadcast by the station or programmed. The display will show To activate RBDS, press the TA button programme that is on i.e. News, NO FM or NO AM if unprogrammed and hold for at least two sec
ページ13に含まれる内容の要旨
2-6 Controls and operation Programme type (PTY) If the current station is already on the PTY31-Alarm (where broadcast) selected priority programme type, then When using the radio with RBDS when this station is lost, the radio will selected, a PTY31-ALARM service will attempt to find another with the correct operate, to alert on any crises of major programme type. This has two functions: national importance. When such a To cancel priority programme type, press broadcast is made, ALARM will
ページ14に含まれる内容の要旨
Controls and operation 2-7 RBDS trouble-shooting guide Incorrect response from RBDS Reason and rectification Radio does not display programme name. Check that RBDS is turned on by pressing and holding the TA button until the display confirms RBDS ON. If the radio does not display a programme service name, it is not broadcasting RBDS data, or you are in a poor reception area. Try re-tuning to another station with RBDS. Station name is lost and displays frequency only. Radio has lost reception
ページ15に含まれる内容の要旨
2-8 Controls and operation Single CD player operation Eject and CD-in indicator MIX When a CD is inserted, the CD icon is To play random tracks from the disc, displayed. Press to eject the CD. press and release the MIX button. The display will show DISC EJECT and MIX will be displayed. To cancel, the CD icon will be turned off. press the MIX button again. The audio display will indicate which function has been selected. CD button REPEAT Messages include: If you are playing the radio or Pres
ページ16に含まれる内容の要旨
Controls and operation 2-9 Seek up and down This control selects seeking of tracks up or down. Momentarily press the right- hand button to skip to the next track. Repeated pressing will select further tracks. The left-hand button returns to the beginning of the current track. Repeated pressing selects previous tracks. Pushing and holding either button selects cue and review of the CD. Note: Sound level is reduced when cuing and reviewing a CD.
ページ17に含まれる内容の要旨
2-10 Controls and operation MiniDisc (MD) operation Eject and MD-in indicator MIX When a MD is inserted, the MD icon is To play random tracks from the disc, displayed. Press to eject the MD. press and release the MIX button. The display will show DISC EJECT and MIX will be displayed. To cancel, the MD icon will be turned off. press the MIX button again. The audio display will indicate which function has been selected. MD button REPEAT Messages include: If you are playing the radio or Press
ページ18に含まれる内容の要旨
Controls and operation 2-11 Seek up and down This control selects seeking of tracks up or down. Momentarily press the right- hand button to skip to the next track. Repeated pressing will select further tracks. The left-hand button returns to the beginning of the current track. Repeated pressing selects previous tracks. Pushing and holding either button selects cue and review of the MD. Note: Sound level is reduced when cuing and reviewing a MD.
ページ19に含まれる内容の要旨
2-12 Controls and operation Cassette tape player operation Eject and tape-in indicator Fast forward and rewind When a cassette is inserted, the aperture These controls have two functions, door closes and a cassette icon is to seek a track, and tape fast forward or displayed. Press to eject the cassette. rewind. Momentarily pressing the right- hand button will locate the beginning of the next track. Similarly pressing the left- hand button, will return to the beginning of the current track. P
ページ20に含まれる内容の要旨
Controls and operation 2-13 Radio set up Preset 8 Blank. This function enables the radio to be set to user operating Preset 9 Blank. preferences. By selecting SET UP and using the preset buttons, the owner or Jaguar Dealer can adjust certain radio functions. Preset 0 During initial factory installation, this is used to set the radio to the USA region. Regional settings When in SET UP, pressing the relevant preset button, as determine the correct frequency increments detailed below, will di
