ページ1に含まれる内容の要旨
KD-S6250
KD-S580
CD RECEIVER
RECEPTOR CON CD
RECEPTEUR CD
KD-S6250/S580
KD-S6250
FM
DIRECT TRACK ACCESS
CD
SSM
AM
MO RPT RND
MODE SCM
KD-S580
FM
DIRECT TRACK ACCESS
CD
SSM
AM
MO RPT RND
MODE SCM
COMPACT
DIGITAL AUDIO
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
ページ2に含まれる内容の要旨
INFORMATION (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante
ページ3に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit .................................. 2 Selecting CD playback modes ................... 12 How to use the number buttons ................... 3 Prohibiting CD ejection .............................. 13 LOCATION OF THE BUTTONS ...............4 SOUND ADJUSTMENTS .................
ページ4に含まれる内容の要旨
LOCATION OF THE BUTTONS Control panel ; a s dfg h j k l Display window 5 12 34 6789 FM DIRECT TRACK ACCESS CD SSM AM MO RPT RND MODE SCM q w r t y p e u io 1 (Standby/On/Attenuator) button Display window 2 +/– button ; "SCM" indicator 3 LOUD (Loudness) button a CD indicator 4 SEL (Select) button s Band indicators 5 Loading slot FM1, FM2, FM3 6 AM button AM 70 (Eject) button d Tuner reception indicators 8 CD button MO (Monaural), ST (Stereo) 9 FM button f RND (Random) indicator p Remote sensor (o
ページ5に含まれる内容の要旨
4 Functions the same as the + and – buttons on Remote controller the main unit. Note: These buttons cannot be used for the clock (only for KD-S6250) (CLOCK H, CLOCK M), SCM LINK and LEVEL (see pages 17 and 18). This section is only for KD-S6250. 5 Selects the sound mode. Each time you press the button, the mode changes. 5 6 Selects the source. 6 1 Each time you press the button, the source changes. 2 7 • Searches stations while listening to the radio. 7 • Fast -forwards or reverses the track if
ページ6に含まれる内容の要旨
Preparing the remote controller 3 Return the battery holder. Insert again the battery holder pushing it until This section is ONLY FOR KD-S6250. you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote (back side) sensor on the main unit. Make sure there is no obstacle in between. Remote sensor WARNING: • Store the batteries in a place which children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately.
ページ7に含まれる内容の要旨
BASIC OPERATIONS 1 FM DIRECT TRACK ACCESS CD SSM 2 AM MO RPT RND MODE SCM 3 Turning on the power 4 Adjust the sound as you want (see pages 14 – 16). 1 Turn on the power. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and Note on One-Touch Operation: the volume level will drop in a moment. When you select a source in step 2 below, the To resume the previous volume level, press the power automatically comes on. You do not have but
ページ8に含まれる内容の要旨
RADIO BASIC OPERATIONS FM DIRECT TRACK ACCESS CD SSM AM MO RPT RND MODE SCM To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune into a particular station. Searching a station manually: Manual search Searching a station automatically: Auto search 1 Select the band (FM 1 – 3, AM). 1 Select the band (FM 1 – 3, AM). FM FM1 FM2 FM FM3 FM1 FM2 FM3 AM AM AM AM Note
ページ9に含まれる内容の要旨
Storing stations in memory 3 Tune into a station you want while “M” is flashing. You can use one of the following two methods to Press ¢ to search store broadcasting stations in memory. stations of higher • Automatic preset of FM stations: SSM (Strong- frequencies. station Sequential Memory) SSM • Manual preset of both FM and AM stations Press 4 to search stations of lower FM station automatic preset: SSM frequencies. You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3). •
ページ10に含まれる内容の要旨
Notes: Manual preset • A previously preset station is erased when a new station You can preset up to 6 stations in each band (FM1, is stored in the same preset number. FM2, FM3 and AM) manually. • Preset stations are erased whent the power supply to the memory circuit is interrupted (for example, during Ex: Storing an FM station of 88.3 MHz into the battery replacement). If this occurs, preset the stations preset number 1 of the FM1 band. again. 1 Select the band (FM1 – 3, AM) you want to store
ページ11に含まれる内容の要旨
CD OPERATIONS FM DIRECT TRACK ACCESS CD SSM AM MO RPT RND MODE SCM To stop play and eject the CD Playing a CD Press 0. CD play stops and the CD automatically ejects 1 Insert a disc into the loading slot. from the loading slot. The unit turns on, If you change the source, the CD play also stops draws a CD and starts (without ejecting the CD this time). playback automatically. Notes: Note: • If the ejected disc is not removed for about 15 seconds, When a CD is inserted the disc is automatically in
ページ12に含まれる内容の要旨
Locating a track or a particular Selecting CD playback modes portion on a CD To play back tracks at random (Random Play) 1 Press MODE to enter the functions mode To fast-forward or reverse the track while playing a CD. This unit enters the Press and hold ¢, functions mode. while playing a CD, to fast 2 Press RND (Random), while still in the functions forward the track. mode, so that the RND indicator lights up on SSM the display. Press and hold 4 , Then, each time you press the button, CD whi
ページ13に含まれる内容の要旨
Prohibiting CD ejection You can prohibit the CD ejection and can lock a CD in the loading slot. Press and hold CD and 0 for more than 2 seconds. CD “EJECT” flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected. To cancel the prohibition and “unlock” the CD, press and hold CD and 0 again for more than 2 seconds. “EJECT” appears on the display, and the CD ejects from the loading slot. 13 EN11-13-KD-S6250/S580[J]-3 13 11/8/01, 8:56 AM ENGLISH
ページ14に含まれる内容の要旨
SOUND ADJUSTMENTS Adjusting the sound 2 Adjust the level You can adjust the sound characteristics to your To increase the level. preference. 1 Select the item you want to adjust. To decrease the level. Each time you press the button, the adjustable items change as follows: Bass level indicator Treble level indicator Indication To do: Range BAS Adjust the bass. –06 (min.) Note: (Bass) | Normally the + and – buttons work as the volume +06 (max.) control. So you do not have to select “VOL” to adj
ページ15に含まれる内容の要旨
Recalling the sound modes Using the Sound Control When “SCM LINK” is set to “LINK ON,” Memory (SCM) select the source. You can select and store a preset sound adjustment FM suitable to each playback source. (Advanced SCM) CD Selecting and storing the sound modes Once you select a sound mode, it is stored in AM memory. It will be recalled every time you select the same source and will be shown on the display. A sound mode can be stored for each of the Each time you change the playback source, the
ページ16に含まれる内容の要旨
Storing your own sound 5 To turn ON/OFF the loudness function. See page 14 for details. adjustment You can adjust the sound modes (BEAT, SOFT, POP: see page 15) to your preference and store your own adjustments in memory. • There is a time limit in doing the following procedure. If the setting is cancelled before you 6 Press and hold SCM until the sound finish, start from step 1 again. mode you have selected in step 1 flashes on the display. 1 Call up the sound mode you want to Your adjustment m
ページ17に含まれる内容の要旨
OTHER MAIN FUNCTIONS To Cancel Advanced SCM Setting the clock You can cancel the Advanced SCM (Sound Control 1 Press and hold SEL (Select) for more Memory), and unlink the sound modes and the than 2 seconds. playback sources. “CLOCK H”, “CLOCK M”, “SCM LINK” or When shipped from the factory, a different sound “LEVEL” appears on the display. mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources. LINK ON: Advanced SCM (different SCM for
ページ18に含まれる内容の要旨
Selecting the level display 3 Select the desired mode — “VOL 1”, “VOL 2” or “OFF”. You can select the level display according to your preference. When shipped from the factory, “VOL 2” is selected. VOL 1 : Shows the volume level indicator. VOL 2 : Alternates “VOL 1” setting and illumination display. OFF : Erase the volume level indicator. 4 Press SEL (select) to finish the setting. 1 Press and hold SEL for more than 2 seconds. “CLOCK H”, “CLOCK M”, “SCM LINK” or “LEVEL” appears on the display. 2
ページ19に含まれる内容の要旨
How to attach the control panel Detaching the control panel You can detach the control panel when leaving the car. 1 Insert the left side of the control panel When detaching or attaching the control panel, be into the groove on the panel holder. careful not to damage the connectors on the back of the control panel and on the panel holder. How to detach the control panel Before detaching the control panel, be sure to turn off the power. 1 Unlock the control panel. 2 Press the right side of the co
ページ20に含まれる内容の要旨
MAINTENANCE Moisture condensation Handling CDs Moisture may condense on the lens inside the CD player in the following cases: This unit has been designed only to reproduce the • After starting the heater in the car. COMPACT • If it becomes very humid inside the car. CDs bearing the mark. DIGITAL AUDIO Should this occur, the CD player may malfunction. In this case, eject the CD and leave • Other discs cannot be played back. the unit turned on for a few hours until the moisture evapora
