ページ1に含まれる内容の要旨
CASSETTE RECEIVER
CASSETTEN-RECEIVER
RADIOCASSETTE
RADIO/CASSETTESPELER
KS-FX950R
/I
40WX4 KS-FX950R
ATT SOUND
TAPE
DISP
DAB
SEL MO/RND
FM/AM
AUX
RPT
LO CD-CH
DOLBY B NR
SSM 7 8 9 10 11 12
TP
RDS PTY BBE
For installation and connections, refer to the separate manual.
Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung.
Pour l’installation et les raccordements, se référer au manuel séparé.
Zie de afzonderlijke handleiding voor details aangaande het installeren en verbi
ページ2に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BASIC OPERATIONS ....................................................4 RADIO BASIC OPERATIONS .........................................5 Listening to the radio ..................................................................... 5 Storing stations in memory ......................................
ページ3に含まれる内容の要旨
OTHER MAIN FUNCTIONS .........................................25 Setting the clock ............................................................................ 25 Changing the general settings (PSM) ........................................ 26 Selecting the clock display .........................................................28 Selecting the CD Text information display ................................. 28 Selecting the level display ......................................................... 28 S
ページ4に含まれる内容の要旨
BASIC OPERATIONS 1 Note: When you use this unit for the first time, set the built-in clock correctly. (See page 25.) 3 2 1 / I ATT Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 TAPE Select the source. To operate the tuner, see pages 5 – 16. DAB To operate the cassette deck, see pages 17 – 20. FM/AM To operate the CD changer, see pages 36 – 38. AUX To operate
ページ5に含まれる内容の要旨
RADIO BASIC OPERATIONS Listening to the radio RPT/LO 2 1 DAB 1 Select the band (FM1, FM2, FM3 or AM). FM/AM You can select any one of FM1, FM2, and FM3 to listen to an FM station. F1 F2 F3 AM (FM1) (FM2) (FM3) Selected band (or clock time: see page 28) appears. 2 To search stations Start searching a station. of higher When a station is received, searching stops. frequencies. To search stations of lower frequencies. To stop searching before a station is received, press the same button you have pr
ページ6に含まれる内容の要旨
Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3). 2 1 DAB 1 Select the FM band number (FM1, FM2 or FM/AM FM3) you want to store FM stations into. F1 F2 F3 AM (FM1) (FM2) (FM3) 2 SSM Press and hold both buttons for m
ページ7に含まれる内容の要旨
Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 2 3 1 1 DAB Select the FM1 band. FM/AM 2 Tune into a station of 88.3 MHz. See page 5 to tune into a station. 3 Press and hold the number button (in this example, 1) for more than 2 seconds. Preset number and “MEMO” flashes alternately for a while. 4 Repeat the above procedure to store other stations into other preset numbe
ページ8に含まれる内容の要旨
Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 6 and 7. DISP MO/RND/ 2 1 DAB 1 Select the band (FM1, FM2, FM3 or AM) FM/AM you want. F1 F2 F3 AM (FM1) (FM2) (FM3) 2 Select the number (1 – 6) for the preset station you want. To change the display information while receiving an FM RDS station Press DISP. Each time you press the button, the display changes as follows: PS (Station name) S
ページ9に含まれる内容の要旨
RDS OPERATIONS What you can do with RDS EON RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the stations send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc. Another advantage of RDS function is called “EON (Enhanced Other Networks).” The EON indicator lights up while receiving an FM station with the EON data. By using the EON data sent from a st
ページ10に含まれる内容の要旨
Mode 1 The AF indicator lights up but the REG indicator does not. Network-Tracking is activated with Regionalization set to “off.” Switches to another station within the same network when the receiving signals from the current station become weak. Note: In this mode, the programme may differ from the one currently received. Mode 2 Both the AF indicator and the REG indicator light up. Network-Tracking is activated with Regionalization set to “on.” Switches to another station, within the same netw
ページ11に含まれる内容の要旨
Using Standby Reception Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) and Traffic Announcement (TA) from the current source (another FM station, tape, CD and other connected components). Note: Standby Reception will not work if you are listening to an AM station. TA Standby Reception • When you press TP/RDS while listening to an FM station, the TP indicator TP RDS is lit during reception of a TP (Traffic Programme) station and the TA sta
ページ12に含まれる内容の要旨
Selecting Your Favorite Programme for PTY Standby Reception You can select your favorite programme for PTY Standby Reception to store in memory. When shipped from the factory, “NEWS” is stored as the programme type for PTY Standby Reception. 3 1, 4 2 1 Press and hold SEL (select) for more than 2 SEL seconds to call up the Preferred Setting Mode (PSM: see page 26). 2 Select “PTY STBY (standby)” if not shown on the display. 3 Select one of twenty-nine PTY codes. (See SEL page 16.) Selected code na
ページ13に含まれる内容の要旨
To store your favorite programme types 3 1, 524 1 Press and hold SEL (select) for more than 2 SEL seconds to call up the Preferred Setting Mode (PSM: see page 26). 2 Select “PTY SRCH (search)” if not shown on the display. 3 Select one of twenty-nine PTY codes. SEL (See page 16.) Selected code name appears on the display. • If the code already stored in memory is selected, it will flash on the display. 4 Press and hold the number button for more than 2 seconds to store the PTY code selected into
ページ14に含まれる内容の要旨
To search your favorite programme type 2 1 1 Press and hold PTY (programme type) for PTY more than 1 second while listening to an FM station. The last selected PTY code and preset number appear. 2 Select one of PTY codes stored in preset number buttons (1 to 6). Ex. When “ROCK M” is stored in preset number button 2. PTY search for your favorite programme starts after 5 seconds. • If there is a station broadcasting a programme of the same PTY code you selected, that station is tuned in. • If ther
ページ15に含まれる内容の要旨
Other convenient RDS functions and adjustments Automatic selection of the station when using the number buttons Usually when you press the number button, the preset station is tuned in. However, when the preset station is an RDS station, something different will happen. If the signals from that preset station are not sufficient for good reception, this unit starts searching another station broadcasting the same programme as the original preset station is broadcasting, then if any station broadca
ページ16に含まれる内容の要旨
Automatic clock adjustment When shipped from the factory, the clock built in this unit is set to be readjust automatically using the CT (Clock Time) data in the RDS signal. If you do not want to use automatic clock adjustment, follow the procedure below. • See also “Changing the general settings (PSM)” on page 26. 1. Press and hold SEL (select) for more than 2 seconds so that “PSM” appears on the lower part of the display. 2. Select “AUTO ADJ (adjust)” with ¢ or 4 . 3. Select “OFF” by turning th
ページ17に含まれる内容の要旨
TAPE OPERATIONS Listening to a tape MO/RND/ 1 Open the control panel. 2 1. Insert a cassette into the cassette compartment. The unit turns on and tape play starts automatically. 2. Close the control panel by hand. • When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse) Note on One-Touch Operation: When a cassette is already in the cassette compartment, pressing TAPE 2 3 turns on the unit and starts tape play automatically.
ページ18に含まれる内容の要旨
To stop play and eject the cassette Press 0. Tape play stops and the cassette automatically ejects from the cassette compartment. If you change the source to FM, AM, CD changer or AUX, the tape play also stops (without ejecting the cassette this time). • You can also eject the cassette with the unit turned off. To fast-forward and rewind a tape • Press ¢ for more than 1 second to fast-forward the tape. When the tape reaches its end, the tape is reversed and playback starts from the beginning of
ページ19に含まれる内容の要旨
Finding the beginning of a tune Multi Music Scan allows you to automatically start playback from the beginning of a specified tune. You can specify up to 9 tunes ahead of or before the current tune. ¢ 4 During playback To locate a tune ahead of the current Specify how many tunes ahead of or tune on the tape before the current tune the tune you want is located. To locate a tune before the current tune on the tape Each time you set the tune, the number changes up to ±9. When the beginning of the s
ページ20に含まれる内容の要旨
Other convenient tape functions Turning on/off Tuner Call Play When you start fast-forwarding or rewinding a tape, the source changes to the tuner temporarily and you can listen to the last received station. After fast forward or rewind is stopped, tape play resumes automatically. When shipped from the factory, Tuner Call Play has been activated. • See also “Changing the general settings (PSM)” on page 26. 1. Press and hold SEL (select) for more than 2 seconds so that “PSM” appears on the lower
