ページ2に含まれる内容の要旨
z All other audio devices connect to the round 3.5mm headphone or line out socket. Note o Be sure to adjust the media player volume level to at least a few steps below maximum output to ensure the signal going to the radio is not distorted. This will also help conserve battery life. Insert player and cushion into fairing pocket z With the connection side of the device facing downward, insert it into the underside slot of the supplied foam cushion. The wider slot is designed to accommodat
ページ3に含まれる内容の要旨
Voyager Radio Accessory Instructions Description: Intercom Model: Vulcan 1700 Voyager (all) iPod®/Aux Connectors XM Radio K10400-027/028/032/035/036 Part-Number: K10400-040/041 K10400-038 These instructions supplement the above accessory installation instructions and Vulcan 1700 Voyager Owner’s Manual Audio System section. Important Notice Some states prohibit the wearing of “headphones” or “headsets” while operating a motor vehicle. Mounting audio speakers in motorcycle
ページ4に含まれる内容の要旨
]iPod® Adaptor (Accessory K104400-040) The optional iPod harness allows an iPod to be controlled through the Vulcan 1700 Voyager audio system. The display will show song and artist information from your iPod and allow you to select songs and play lists. The iPod battery is charged whenever the audio system has power. Note ○Only one media player can be connected to the sound system. This means that you will be able to use either an iPod or a portable media device, but not both at the same
ページ1に含まれる内容の要旨
Assembly Instructions
Description: iPod® Adapter Cable Model: Vulcan 1700 Voyager
MP3/Audio Adapter Cable
Part Number: K10400-040 Approximate 15 min.
K10400-041 Assembly Time:
Before you begin installation, read through the installation instructions and check to be sure all parts are
present.
If you are in doubt as to any part of the installation, please ask your authorized Kawasaki dealer to
complete the installation. Please note that Kawasaki cannot assume any responsibility for damage
re
