ページ1に含まれる内容の要旨
SD82
Instruction Manual
Fully Compatible to the Formats
of Files Such as DVD, VCD,
JPEG, MP4, MP3, MWA, CD.
2 IN 1 CAR AUDIO SYSTEM WITH
DVD.VCD.JPEG.MP4.MP3.WMA.CD DISC PLAYER
AND AM/FM STEREO DIGITAL TUNING RADIO
Remark: Any information subject to change without further notice
WWW. LANZAR. COM
ページ2に含まれる内容の要旨
Contents 1. Before Operation..........................................................................................2 1.1 Glossary...............................................................................................2 1.2 Precautions and Maintenance.................................................................2 1.3 Maintenance and Cleaning of Discs.........................................................3 1.4 Battery Information of Remote Control....................................
ページ3に含まれる内容の要旨
1. Before Operation 7. Specification 1.1 Glossary General Specification Power Requirement.............................................................DC 12V PBC (playback control) Maximum Power Output...................4x 80W(measured at DC 14.4 V) It isa kind of signal(menu) recorded in the disc with SVCD or VCD2.0 Dimensions(wxhx d)............................................178x 50x 165mm format used for the playback control. For the discs contained PBC, It can playback interactive software w
ページ4に含まれる内容の要旨
1.3 Maintenance and Cleaning of Discs 6. Trouble Shooting Disc Maintenance 1. Toh keep the disc clean, andle the disc by its edge, do not touch the disc surface of the play side. Symptom Cause Solution 2. Do not stick paper or tape on the disc. If there is glue (or analog) on the disc surface, must wipe it up before using. 3. Do not expose the disc to direct sunlight, or nearby heat sources such as caliduct, or leave it ina car parked in direct sunlight where there can bea Power does not IR Remo
ページ5に含まれる内容の要旨
1.5 Remote Control Description 3 31 39 1 5.21 Region Code 1. MODE BUTTON POWER LOC SETUP Q: Not begin to playback but to display REGION ERROR after inserting disc into 2. SEL BUTTON OSD MODE 4 14 disc compartment. Why? MUTE MENU 9 3. POWER BUTTON A: Because the DVD player and disc has respective region code. If the region codes EQ BAND 32 37 of them are not match with each other, the DVD player can not play the disc. ENTER 36 4. JOG UP/SEEK UP BUTTON SEL 6 2 8 5. F.FWD/NEXT BUTTON 38 CLK + 5 STO
ページ6に含まれる内容の要旨
5.20 Parental Control 1.6 Description of Face of Front Panel Q:After inserting DVD disc into disc compartment, it will appear a dialogue window that ask me inputa password of4 digit. Why? A:This is because that the disc movie you are playing was rated with the Parental Control, and the current rating level of DVD player is lower than one of current disc. You must input right password and enter it to entry Parental Control setup menu and then seta equal or higher rating level than one of current
ページ7に含まれる内容の要旨
1.7 Description of Unit Chassis Face D. Preference Page EJ Audio Subtitle Disc Menu Parental Angle Mark Default 1 2 3 1.LED indicator: Flashing when detachable panel is removed. 2.RESET button: Press it to rehabilitate the distorted program to zero. 3. EJECT button: press it to eject disc from disc compartment. AUDIO When the disc can not be eject out of the compartment, This item is for selecting an audio language. press MODE button to change into RADIO mode and then press EJECT button to eject
ページ8に含まれる内容の要旨
DOWNMIX 1.9 DESCRIPTION OF LCD ON THE FRONT PANEL It is for selecting your desired sound effect when there is not central speaker and sub-woofer. There are2 modes: LT/RT, STEREO. LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, choose 9 2 4 5 6 the item, so it will output audio signal with vivid theatre effect. STEREO: If you choose the item, when outputting audio signal with 5.1 channels, it will output the left and right channels of signal ; when outputting audio signal with 2 ch
ページ9に含まれる内容の要旨
1.10 Description of Input/Output Wires If your TV set has only NTSC or PAL Type, the screen will blink and become colorless when a wrong TV Type is selected. In this case, press the N/P button on the Remote Control to switch the right TV Type to match the TV color system. TV Display The setup item is for matching the TV screen size. 4:3 PS: Choose the item when connecting a TV set with 4:3 screen. When ANTENNA SOCKET playing the pictures with 16:9 size, the left and right parts of the video will
ページ10に含まれる内容の要旨
1.11 INSTALLATION 5.19 System Setup Menu Operation 1. Press SETUP button on the IR remote control to display System Settings Main Menu on the TV screen. The System Setting Main Menu INSTALLATION INSTRUCTIONS consist of4 parts, i.e.4 sub-menu. From left side to right side, they are IT IS AN ANTI-THEFT INSTALLATION WAY. THE CHASSIS WEAR A ME TAL General Setup Page, Speaker Setup Page, Video Setup Page and SLIDING HOUSING. PLEASE HAVE THE WIRING CONNECTION OF THE POWER SUPPLY, SPEAKERS AND ANTENNA
ページ11に含まれる内容の要旨
2. Common Operation 3. During JPEG playback, press one of the >/< buttons to change the angle of viewing picture that is displaying as follows: 1. POWER BUTTON >: 90 deg cw; <: 90deg ccw Under power on mode, press POWER button shortly to turn off the unit but During JPEG playback, press the STOP or MENU button to stop playing and the clock still display on LCD. Press power button again to turn on the unit. return to the root menu. Under power on mode, press POWER button long, it will display SEE
ページ12に含まれる内容の要旨
5.12 Change Audio Language 3. Radio Operation 1. In the state of DVD disc playing, press the AUDIO button repeatedly 1. PRESET STATION[ 1-6] BUTTONS on the IR remote control to select the desired language type. A]. To memorize the current frequency, press any one of the six preset (depend on the disc used) buttons(1-6) on the front panel or on the remote control hold for more than 2 seconds. 2. In the state of MP3/WMA disc playing, the AUDIO button on the IR B]. To recall the preset memory, pres
ページ13に含まれる内容の要旨
2 Use number button to input desired sequence number of title/chapter/ track with desired sequence. 3 Use direction button to move cursor onto START item, then press PLAY /PAUSE button toplay the programmed tracks in programmed order. 4 To exit program playback, firstly press PROGRAM button to enter program interface again. At the time, the cursor will stay on STOP item, pressing ENTER button will move cursor onto EXIT item, then press ENTER or PLAY /PAUSE button to exit program playback and res
ページ14に含まれる内容の要旨
use UP or DOWN button to select a desired item, then press ENTER button to enter it. Use UP/DOWN/LEFT/RIGHT button to select the 4. Basic Disc USB MMC/SD Operation item for inputting number for title/chapter/ track, then use the number buttons to input the corresponding serial number, finally press the ENTER button to play. 4.1 Begin playback 2. In the state of CD disc playing, press the INT button on the remote 1. Press POWER button to turn on the DVD player. controller to play the previous 10
ページ15に含まれる内容の要旨
5.4 Playback Repeatedly 4.2 Pause Playback 5.4.1 ONE/ALL Repeat In the state of DVD/VCD/CD/MP3/WMA disc playing, press the PLAY /PAUSE button on IR remote control or the front panel of DVD 1. Under mode of DVD disc playback: player to pause the playback, press the PLAY/PAUSE button again Press the REPEAT button on the IR remote control or the 2RPT button to resume normal playback. on the front panel to select Repeat Chapter, Repeat Title, Repeat All or Repeat Off. 4.3 Stop Playback 2. Under mode
ページ16に含まれる内容の要旨
1).When it is in the state of PBC ON and display the PBC menu on the TV 4.7 Terminate Playback screen if the disc include PBC menu, press one(s) of NUMBER buttons to select the track/chapter to playback; During playing, the NUMBER 1. Press OPEN button to flip down the front panel, then press EJECT button buttons are not available. to eject disc from disc compartment and then take away the disc. 2).When it is in the state of PBC OFF, press one(s) of the NUMBER buttons to select the chapter/track
