ページ1に含まれる内容の要旨
®
Operating Instructions
for Car Mounter
Handheld Computer
Model No. CF-P2 Series
Please read this instructions manual carefully before using this product and save this manual
for future use.
Contents
Introduction ................................................... 2
Installation ..................................................... 3
Operating Instructions .................................. 6
ページ2に含まれる内容の要旨
Introduction Thank you for purchasing the car mounter. Read these instructions carefully in conjunction with CF-P2 operating instructions. Illustrations and Terminology in this Manual NOTE: NOTE provides a useful fact or helpful information. CAUTION: CAUTION indicates a condition that may result in minor or moderate injury. - [Programs]: This illustration means to tap at the top of the screen, then to tap [Programs]. : Where to go for referred information. Confirm the inclusion of all parts. M
ページ3に含まれる内容の要旨
Installation Take the following into account when installing the microphone and the antenna. Distance from microphone to the speaker >1m Distance from microphone to the user’s mouse <80cm Avoid installing directly in the air flow of the sunroof, window or ventilation. Distance from microphone to the GSM/GPRS antenna >50cm 3
ページ4に含まれる内容の要旨
Installation Connector A B F E D C A Connected to Cradle B Connected to PC C Connected to USB Device D Connected to Speaker E Connected to Microphone ( below) F Connected to Car cables Car Cable Connections 6 5 4 3 2 1 Color Connections Fuse 1 1 Red Battery (+) DC12.0V 3A* 2 2 Blue Ignition 1A* 2 3 Yellow Radio Mute/Ground 1A* 4 ----------- ----------- 5 ----------- ----------- 6 Black Ground 1 * Use iMaxx’s fuse (Parts No. FB3). 2 * Use iMaxx’s fuse (Parts No. FB1). CAUTION Ensure to use
ページ5に含まれる内容の要旨
Installation Cradle Binders Binders 5
ページ6に含まれる内容の要旨
Operating Instructions Inserting CF-P2 Insert CF-P2 into the cradle as shown below. If the hook is hanging down, press the release lever, and insert CF-P2 after lifting up the hook. Insert CF-P2 firmly until the hook “clicks”. Release Lever CAUTION When inserting CF-P2, do not force it or strike it. Inserting CF-P2 forcefully while the hook is down may result in damage to CF-P2 or cradle. 6
ページ7に含まれる内容の要旨
Operating Instructions Removing CF-P2 Press the release lever firmly and lift CF-P2 up. Release Lever CAUTION Do not try to remove CF-P2 forcefully without pressing the release lever, as this may result in damage to CF-P2 or cradle. Using CF-P2 handsfree CF-P2 phone function can be used without having to remove CF-P2 from the car cradle, by speaking into the microphone and listening to the speaker. If power is being supplied to the Car kit (when the vehicle’s engine is turned on), when CF-P2 is
