Panasonic CZ-RWSU2Uの取扱説明書

ページ1に含まれる内容の要旨

Model No. CZ-RWSU2U
INSTALLATION INSTRUCTIONS
If a group of units are to be controlled by 2 remote controllers;
Warnings about Installation of Receivers
Main/sub remote controllers will work regardless of which indoor unit they are installed to.
The wireless remote uses a very weak infrared light for its signal, which can result in the signal not
Cross-wiring Remotes for Group
being received because of the following infl uences, so take care in where the unit is installed.
Control (Field Supp

ページ2に含まれる内容の要旨

Installing the Badge The Self-Diagnosis Function Display and What is Detected Attach the badge above the display. (See Fig.5.) Alarm Display in the table below indicates the content of alarms that are displayed when a wired remote controller is connected. For information on how to deal with the alarms, refer to the Mounting Instructions for the indoor unit or to Test Run or servicing materials. Error Detected WL Remote Control LED Display Alarm Display Run Timer Standby Blinking Communication