ページ1に含まれる内容の要旨
Studio MMP3400
Service Guide
Service guide files and updates are available
on the ACER/CSD web; for more information,
please refer to http://csd.acer.com.tw
PRINTED IN TAIWAN
ページ2に含まれる内容の要旨
Revision History Please refer to the table below for the updates made on Studio MMP3400 service guide. Date Chapter Updates II
ページ3に含まれる内容の要旨
Copyright Copyright © 2009 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Acer Incorporated. Disclaimer The information in this guide is subject to change without notice. Acer Incorporated makes no rep
ページ4に含まれる内容の要旨
Conventions The following conventions are used in this manual: SCREEN MESSAGES Denotes actual messages that appear on screen. NOTE Gives bits and pieces of additional information related to the current topic. WARNING Alerts you to any damage that might result from doing or not doing specific actions. CAUTION Gives precautionary measures to avoid possible hardware or software problems. IMPORTANT Reminds you to do specific actions relevant to the accomplishment of procedures. IV
ページ5に含まれる内容の要旨
Preface Before using this information and the product it supports, please read the following general information. 1. This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION decided for Acer's "global" product offering. To better fit local market requirements and enhance product competitiveness, your regional office MAY have decided to extend the functionality of a machine (e.g. add-on card, modem, or extra memory capability). These LOCALIZED FEATURES
ページ6に含まれる内容の要旨
VI
ページ7に含まれる内容の要旨
Table of Contents Chapter 1 System Specifications 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 I/O interface: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Studio MMP3400 System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Your Studio MMP3400 tour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ8に含まれる内容の要旨
VIII
ページ9に含まれる内容の要旨
Chapter 1 System Specifications Features Below is a brief summary of the Studio MMP3400’s feature: • Main Chip : ESS ES6461 • Main Memory : 16MB SDRAM, 8Mx16 x1pcs. • Serial Flash : 2MB SPI Flash. • Stereo Audio DAC: ES64641 build in • Build in 3.5” SATA HDD • USB Bridge: Genesys GL830 • HDMI TX:ESS ES7109 • Dimension (L x H x W): 218 mm x 151 mm x 55 mm • Weight: ± 1388g (2 TB HDD), ± 1058g (500 GB HDD), Accessories: 400g NOTE: Weight may vary depending on the HDD installed. I/O interface:
ページ10に含まれる内容の要旨
• System setup • USB 2.0 HOST port x 1 and Mini USB Device port x1 in Rear I/O. • Video output support • Component video up to 1080i • CVBS –PAL system • HDMI—480p up scaling to 1080P • Audio output support • Stereo audio out • SPDIF audio out • Dolby certification 2 Chapter 1
ページ11に含まれる内容の要旨
Studio MMP3400 System Block Diagram Component Component 16MB SDRAM 16MB SDRAM (8Mx16)x1pcs (8Mx16)x1pcs Composite Composite 2MB SPI Flash 2MB SPI Flash Audio Audio Audio L/R Audio L/R filter filter ESS ESS SATA HDD SATA HDD SPDIF SPDIF IDE IDE GL830 GL830 ES6461 ES6461 Mini Mini- -USB USB HDMI TX HDMI TX ES7109 ES7109 HDMI HDMI USB port x1 USB port x1 Host mode type A Host mode type A Blower Blower IR IR Power/HDD LED Power/HDD LED Receiver Receiver Chapter 1 3
ページ12に含まれる内容の要旨
Your Studio MMP3400 tour Appearance 1 2 3 4 5 6 7 8 # Item Description 1 Connection LIght • Red - On • Flashing - Hard drive activity • Off - Standby 2 High Definition Video Out This connector provides a high definition video signal. The YPbPr cable must be connected to this port. 3 A/V Out This connector provides video and analogue audio signals. The provided cable includes S-Video, Composite video and stereo audio outputs. 4 SPDIF This interface is used to transfer compressed digital audio a
ページ13に含まれる内容の要旨
Removet Control Function depends on active selection: # Button Movie Music Picture Settings 1 HOME Display the main menu 2 VOL - Decrease volume - 3 VIDEO Go to the Video screeen 4 PHOTO Go to the Photo screen 5 DIRECTION KEYS Go up, down, left, right. Left arrow: go up one directory. Go back/forward 12 seconds during Go to previous/next - playback image. Move up/ down/left/right in zoom mode. 6PAUSE Pause slideshow - Pause during playback 7 SKIP- Go to previous Go to previous song Go to previo
ページ14に含まれる内容の要旨
Function depends on active selection: # Button Movie Music Picture Settings 12 AUDIO/EQ Switch audio track Adjust the music Adjust the music - during playback playback effect playback effect during music slideshow 13 INFO Displays file information (e.g. size, format, etc.) during playback - 14 THUMBNAILS Displays image preview - 15 BACK Return to playlist - Return to playlist Return to the main during playback during playback menu Return to the previous menu 16 POWER Power On/Off 17 VOL + Inc
ページ15に含まれる内容の要旨
Chapter 2 Machine Disassembly and Replacement This chapter contains step-by-step procedures on how to disassemble and reassemble the Studio MMP3400 for maintenance and troubleshooting. Disassembly/Reassembly Requirements To disassemble or reassemble the computer, you need the following tools: • Wrist grounding strap and conductive mat for preventing electrostatic discharge • Philips screwdriver (may require different size) • Tweezers NOTE: The screws for the different components vary in size. D
ページ16に含まれる内容の要旨
Disassembly Process This section guide you on how to disassemble the Studio MMP3400 when you need to perform system service of to replace a replaceable parts. The list below are the list of screws used in the Studio MMP3400. Main Screw List Item Color Torque Part No. A Black 4.5kgf-cm 86.SA33Q.8R0 B Silver 6.0kgf-cm 86.9A532.6R0 C Silver 1.5kgf-cm 86.9A552.5R0 D Silver 6.0kgf-cm 86.5A534.4R0 Removing the Outer Casing 1. Remove the rubber foot near the front of the system. 2. Remove the screws
ページ17に含まれる内容の要旨
3. Carefully release the latches and carefully lift up the outer casing. Removing the Base 1. See “Removing the Outer Casing” on page 8. 2. Remove the one screw (B) securing the base to the housing. Step (Quantity) Color Torque 1 1 Silver 6.0 kgf-cm Chapter 2 9
ページ18に含まれる内容の要旨
3. Release the latches and carefully lift up the housing. Removing the Hard Drive 1. See “Removing the Outer Casing” on page 8. 2. See “Removing the Base” on page 9. 3. Carefully slide out the metal shielding. 4. Remove the three screws (B) securing the hard drive to the housing. 10 Chapter 2
ページ19に含まれる内容の要旨
Step (Quantity) Color Torque 1~3 3 Silver 6.0 kgf-cm 5. Slide out the hard drive and remove it from the housing. NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it. Removing the Fan Module 1. See “Removing the Outer Casing” on page 8. 2. See “Removing the Base” on page 9. 3. See “Removing the Hard Drive” on page 10. 4. Disconnect the fan cable from CN4 on the main board. Chapter 2 11
ページ20に含まれる内容の要旨
5. Remove the three screws (C) securing the fan module to the housing. Step (Quantity) Color Torque 1~3 3 Silver 1.5 kgf-cm 6. Remove the fan module from the housing. 12 Chapter 2
