ページ1に含まれる内容の要旨
Important
Please read PRECAUTIONS and this User’s Manual carefully to
familiarize yourself with safe and effective usage procedures. Please
retain this manual for future reference.
ページ2に含まれる内容の要旨
Copyright© 2008 Tech Source, Inc. Copyright© 2008 EIZO NANAO CORPORATION No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of Tech Source, Inc. and EIZO NANAO CORPORATION. Tech Source, Inc. and EIZO NANAO CORPORATION are under no obligation to hold any submitted material or information confidential unl
ページ3に含まれる内容の要旨
Contents 1 Overview...............................................................................................................................5 1.1 Layout of this Manual.............................................................................................................6 1.2 Warnings and Safety Notes ...................................................................................................7 1.3 Packaging..................................................................
ページ4に含まれる内容の要旨
5 Technical Data ...................................................................................................................53 5.1 Display Module ....................................................................................................................53 5.2 Power Supply.......................................................................................................................53 5.3 Operating Conditions.............................................................
ページ5に含まれる内容の要旨
1 Overview The TFT Monitor Raptor SQ2801 was developed to meet the very demanding requirements in the Air Traffic Management where system availability and reliability is crucial. Ergonomic criteria have been addressed to ensure high acceptance from the operators. Reduced depth and lower weight compared to CRT monitors allow easy installation into workstation consoles of air traffic control rooms. Considerably lower power consumption and heat emissions are some of the other advantages ove
ページ6に含まれる内容の要旨
1.1 Layout of this Manual This manual was created to assist system integrators and operators during installation and operation of the LCD TFT Monitor Raptor SQ2801. The layout is intended to allow even inexperienced users to install and set-up the monitor. The manual is divided into following chapters: Chapter 1 Introduction Brief description of the Raptor SQ2801 Chapter 2 Installation The chapter discusses the installation and the various interfaces available to the monitor Chap
ページ7に含まれる内容の要旨
1.2 Warnings and Safety Notes For information about warnings and safety notes, refer to PRECATUIONS supplied with this manual. 1 Overview 7
ページ8に含まれる内容の要旨
1.3 Packaging NOTE To avoid permanent damage, great care should be taken to ensure that the monitor is adequately packed and transported in the correct manner. The original packaging should be retained and re-used for future transportation purposes. The original packaging has a red label with two arrows and text “hier oben” (see Fig. 1 and Fig. 2), which indicates the correct orientation of the package (i.e. when correctly packed this label should be aligned with the top edge and front
ページ9に含まれる内容の要旨
1.4 Instructions for Handling Components Susceptible to Electrostatic Shocks Most of the assemblies within the LCD monitor Raptor SQ2801 contain components which can be permanently damaged or destroyed by electrostatic discharge. Such resulting damage may or may not result in total failure of the components or modules affected. The following precautions must be strictly observed when handling such assemblies (this work should only be carried out by qualified service technicians): • When
ページ10に含まれる内容の要旨
2 General Installation Preparation for installing the LCD monitor includes following steps: • Removal of all packaging materials • Checking of components for damage • Comparison of components received with those listed on the delivery note • Connection to the computer system and power supply • System integration under consideration of technical and ergonomic aspects 2.1 Removal of Packaging and Checking of Component Parts After unpacking all delivered components, they should be che
ページ11に含まれる内容の要旨
2.2 Installing the Monitor The Raptor SQ2801 is currently offered in two versions - desktop version and chassis version. Both these version are discussed in this section. The desktop version is a “standalone” unit that can be placed on top of a desktop console. As for the chassis version, it is easy to integrate it onto the rear of control panel or a console by using two mounting brackets. Please note the following for safe and proper operation: Ambient Temperature In order for
ページ12に含まれる内容の要旨
2.2.1 Raptor SQ2801 Dimensions (Chassis version) Fig. 3: Raptor SQ2801 Dimensions (Chassis version); Front View 12 2 General Installation
ページ13に含まれる内容の要旨
Fig. 4: Raptor SQ2801 Dimensions (Chassis version); Rear View 2 General Installation 13
ページ14に含まれる内容の要旨
Fig. 5: Raptor SQ2801 Dimensions (Chassis version); Side View 14 2 General Installation
ページ15に含まれる内容の要旨
2.2.2 Raptor SQ2801 Dimensions (Desktop version) Fig. 6: Raptor SQ2801 (Desktop Version); Front View 2 General Installation 15
ページ16に含まれる内容の要旨
Fig. 7: Raptor SQ2801 Dimensions (Desktop version); Rear View 16 2 General Installation
ページ17に含まれる内容の要旨
Fig. 8: Raptor SQ2801 Dimensions (Desktop); Side View 2 General Installation 17
ページ18に含まれる内容の要旨
2.2.3 Raptor SQ2801 Dimensions (Panel mount version) Fig. 9: Raptor SQ2801 Dimensions (Panel mount); Front View 18 2 General Installation
ページ19に含まれる内容の要旨
Fig. 10: Raptor SQ2801 Dimensions (Panel mount); Side View 2 General Installation 19
ページ20に含まれる内容の要旨
Fig. 11: Raptor SQ2801 Dimensions (Panel mount); Back View 20 2 General Installation
