ページ1に含まれる内容の要旨
Instruction Manual
EN-7517E / EN-7519E
17” and 19” Value TFT-LCD Monitor
ページ2に含まれる内容の要旨
Please read this manual thoroughly before use, and keep it handy for future reference. SAFETY INSTRUCTION…………………………………………………………………….2 - 3 CAUTIONS ………………………………………..……………………………………………..4 FCC RF INTERFERENCE STATEMENT …………………………………………………….5 CONNECTING WITH EXTERNAL EQUIPMENT…………………………………………… 6 REMOTE FUNCTIONS ……………………………………………………………………….. 7 CONTROLS AND FUNCTIONS…………………………………………………………..8 - 20 MOUNTING GUIDE …………………………………………………………….……..…….. 21 D-SUB CONNECTOR PIN ASSIGNMENTS ……………………………
ページ3に含まれる内容の要旨
1…………………………………………………………………………… INSTRUCTION MANUAL Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) th
ページ4に含まれる内容の要旨
INSTRUCTION MANUAL……………………………………………………………………………… 2 “WARNING - To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.” This symbol is intended to alert the user to the presence of uninsulated : dangerous voltage” with in the product’s enclosure that may be of sufficient magnitu
ページ5に含まれる内容の要旨
3 ……………………………………………………………………………… INSTRUCTION MANUAL CAUTIONk The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à proximité du matériel et être facile d`accès ▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualif
ページ6に含まれる内容の要旨
INSTRUCTION MANUAL …………………………………………………………………………… 4 NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio c
ページ7に含まれる内容の要旨
5 ……………………………………………………………………………… INSTRUCTION MANUAL A. BOTTOM PANEL CONTROL 1 2 34 5 6 7 8 10 11 9 1. DC 12V IN 2. D-SUB IN PC Signal Input 3. VIDEO 1(AV1) IN Composite signal Input for AV1 4. VIDEO 1(AV1) OUT Video looping output for AV1 5. VIDEO 2(AV2) IN Composite signal Input for AV2 6. VIDEO 2(AV2) OUT Video looping output for AV2 7. 8 AUDIO IN (L+R) Stereo Audio Signal Input 9. S-VIDEO (Y/C) IN Y/C separated signal input 10. S-VIDEO (Y/C) OUT Y/C separat
ページ8に含まれる内容の要旨
INSTRUCTION MANUAL…………………………………………………………………………… 6 B. REMOTE CONTROLLER 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video( AV1 / AV2 / S-Video / PC ) sources. 3. APC (Auto Picture Control) Select picture mode. 4. ACC (Auto Colour Control) Select Colour mode. 5. AV1 Select AV1 mode 6. AV2 Select AV2 mode 7. S-VIDEO Select S-VODEO mode 8. PC Select PC mode 9. AUTO Auto geometry ad
ページ9に含まれる内容の要旨
7 …………………………………………………………………………… INSTRUCTION MANUAL 1 2 3 4 5 6 7 8 9 1. SOURCE Select input source, and move the previous menu. 2. MENU Activates and exits the On Screen Display. This button can also be used to move previous menu or status. OSD MENU(MAIN) : Custom, Picture/Sound,Setup 3/4. AUTO/ ▼ / ▲ This button allows user to enter the sub-menu of the activated function AUTO: Auto geometry adjustment in PC Sour
ページ10に含まれる内容の要旨
INSTRUCTION MANUAL…………………………………………………………………………… 8 OSD MENU DESCRIPTION A: CUSTOM MENU (Only Video mode) Press the MENU button and then up(▲) / down(▼) button to select the Custom menu. Press the up(▲) / down(▼) button to select Custom sub menu. Press the left(◀) /right(▶) button to adjust picture setting. Press the MENU button to save. Brightness: Increase or decrease the intensity of the image. Contrast: Increase or decrease the intensity (l
ページ11に含まれる内容の要旨
9 …………………………………………………………………………… INSTRUCTION MANUAL A: CUSTOM MENU (Only PC mode) Press the MENU button and then up(▲) / down(▼) button to select the Custom menu. Press the up(▲) / down(▼) button to select Custom sub menu. Press (◀) /right(▶) button to adjust picture setting. Press the MENU button to save.
ページ12に含まれる内容の要旨
INSTRUCTION MANUAL…………………………………………………………………………… 10 B. Picture / Sound Menu(Only Video mode) Press the MENU button and then up(▲) / down(▼) button to select the Picture / Sound. Press the right(▶) or ENTER button. 1. Picture Mode Press the up(▲) / down(▼) button to select the Picture Mode. Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the desire Picture Mode. Press the MENU button to save.
ページ13に含まれる内容の要旨
11 …………………………………………………………………………… INSTRUCTION MANUAL 2. Color Tone Press the up(▲) / down(▼) button to select the Color Tone. Press the (▶) or ENTER button and then up(▲)/down(▼) button to select the desired color tone. Press the MENU button to save.
ページ14に含まれる内容の要旨
INSTRUCTION MANUAL…………………………………………………………………………… 12 3. Mute Press the up(▲) / down(▼) button to select the Mute. Press the (▶) or ENTER button and then up(▲)/down(▼) button to select the desired Mute. Press the MENU button to save.
ページ15に含まれる内容の要旨
13 …………………………………………………………………………… INSTRUCTION MANUAL 4. Volume Press the up(▲) / down(▼) button to select the Volume. Press (◀) /right(▶) button to adjust Volume. Press the MENU button to save. 5. PC (Only PC mode) Press the up(▲) / down(▼) button to select the PC Press the ▶ or ENTER button
ページ16に含まれる内容の要旨
INSTRUCTION MANUAL………………………………………………………………………………14 Press the up(▲) / down(▼) button to select PC sub menu Press the right(▶) or ENTER button and then left (◀) /right(▶) button to adjust PC setting. Press the MENU button to save. Auto Adjust: Auto geometry adjustment Phase: Adjust the number of horizontal picture elements. H. position: Move image horizontally on screen right or left. V. position: Move image vertically on screen up or down. Frequency: Adjust the ver
ページ17に含まれる内容の要旨
15 …………………………………………………………………………… INSTRUCTION MANUAL 1.Reset Press ENTER button to select the reset Reset: Select to reset all setting to the factory default values.
ページ18に含まれる内容の要旨
INSTRUCTION MANUAL………………………………………………………………………………16 2. Language Press the up(▲) / down(▼) button to select the Language menu. Press the right(▶) or ENTER button. Press the up(▲) / down(▼) button to select language. Press the MENU button to save.
ページ19に含まれる内容の要旨
17 …………………………………………………………………………… INSTRUCTION MANUAL 3. OSD Tone Press the up(▲) / down(▼) button to select the OSD tone menu. Press the right(▶) or ENTER button Press the up(▲) / down(▼) button to select the desire OSD Tone. Press the MENU button to save.
ページ20に含まれる内容の要旨
INSTRUCTION MANUAL………………………………………………………………………………18 4. Blue Screen Press the up(▲) / down(▼) button to select the blue screen. Press the right(▶) or ENTER button. Press the up(▲) / down(▼) button to select on or off. Press the MENU button to save.
