ページ1に含まれる内容の要旨
UV8
Instruction Manual
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
CONTENTS Thank you for choosing a Phase Linear product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Phase Linear UV8 Mobile Multimedia Receiver for maximum enjoyment. Preparation............................................................................................................................ 1 Installation ....................................
ページ4に含まれる内容の要旨
ii
ページ5に含まれる内容の要旨
UV8 PREPARATION Congratulations on your purchase of the Phase Linear UV8 • Two Composite Video Outputs for Additional Screens Mobile Multimedia Receiver. • Two Audio / Video Auxiliary Inputs for Game Console, WARNING! To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor. Camcorder, Navigation, etc. It’s a good idea to read all of the instructions before beginning • Three-Band Tone control (Bass, Mid and Treble) w/ the installation. We recommend having your Phas
ページ6に含まれる内容の要旨
UV8 INSTALLATION Pre-installation FINAL INSTALLATION CAUTION! Be careful not to damage the car wiring. 1. Press the metal levers on both sides to remove the half- sleeve from the radio. 4 5 3. Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve. PREPARE RADIO 1 Wiring Complete wiring as illustrated in the wiring diagram on page 3. Once the wiring is complete, reconnect the battery negative terminal. If there is no ACC available, connect t
ページ7に含まれる内容の要旨
UV8 WIRING DIAGRAM BLUE SUB.W RED External Power Amplifier FRONT R A/V Media WHITE Adapter Cable FRONT L YELLOW RED REAR R WHITE WHITE REAR L RED YELLOW External AV System WHITE Antenna Jack RED YELLOW Rear Video 1 VIDEO OUT 1 Antenna Harness Cord YELLOW Auto antenna control (connect to antenna Rear Video 2 control lead & power supply of antenna VIDEO OUT 2 amplifier) BLUE ANT.CONT External power amplifier control Rear View BLUE/WHITE YELLOW Video Camera P.CONT CAMERA Car Phone Mute (leave open
ページ8に含まれる内容の要旨
UV8 CONTROLS AND INDICATORS Button Operation 4 3 2 1 1. OPEN Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. WIDE/DISP Press to adjust the display aspect of the picture to one of two settings: Full or Normal. WIDE CLOSE With the monitor closed, press the DISP button to cycle TILT PIC through information available on the LCD screen. 3. PIC/AS/PS Press to adjust the Brightness and Contrast. Press the VOL button
ページ9に含まれる内容の要旨
UV8 CONTROLS AND INDICATORS 9. IR Remote Control Receiver 4 3 2 1 10. ( ) DVD Mode: Press once to play back the previous chapter/ track. TUNER Mode: Press once to auto-search for the previous available radio station. MENU Mode: Press once to move the cursor to the left. 11. ( ) DVD Mode: Press once for slow forward/slow reverse. WIDE CLOSE TILT PIC TUNER Mode: Press to go down one frequency step. MENU Mode: Press once to move the cursor down. 12. RESET Press to reset system settings to facto
ページ10に含まれる内容の要旨
UV8 REMOTE CONTROL Table 1: Remote Control Functions Button Function 3 Name Ref# DVD VCD TUNER CD/MP3 8 23 4 MENU 1 Enters the main menu of Turns on/off PBC when the disc playing VCD 5 1 TITLE 2 Enters the title menu of the Plays first ten seconds of 2 9 disc each chapter/title TILT 24 10 MUTE 3 Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output DISP 11 25 4 Turns the power on/off Turns the power on/off Turns the power on/off Turns th
ページ11に含まれる内容の要旨
UV8 Table 1: Remote Control Functions Button Function 3 Name Ref# DVD VCD TUNER CD/MP3 8 4 23 EJECT 23 Ejects disc Ejects disc Ejects disc Ejects disc 5 1 24 Decreases monitor tilt Decreases monitor tilt Decreases monitor tilt Decreases monitor tilt angle angle angle angle 2 9 25 Increases monitor tilt angle Increases monitor tilt angle Increases monitor tilt angle Increases monitor tilt angle 24 TILT 10 DISP 11 25 DISP 26 Selects display mode: Selects display mode: FULL or NORMAL FULL or NORM
ページ12に含まれる内容の要旨
UV8 USING THE TFT MONITOR Open/Close TFT Monitor Aspect Ratio Parking Brake Open TFT Monitor Press the DISP button (10) on the remote control or DISP/ Parking Brake Inhibit WIDE button (2) on the monitor to adjust the aspect ratio as Press the OPEN button (1) on the front panel or press the When the pink "Parking" wire is connected to the vehicle follows: brake switch, the front TFT monitor will display video ( ) button (31) on the remote control to activate the only when the parking brake s
ページ13に含まれる内容の要旨
UV8 Table 3: Monitor Protective Measures Self OPEN Button Power Obstruction Protection Pressed Reconnected Monitor Unit stops at Monitor Monitor swiv- loading out obstruction swivels back els back to vertically point to the unit the unit Monitor Unit stops at Monitor Monitor swiv- loading in obstruction swivels back els back to vertically point to the unit the unit After the protective procedure is executed, normal operation is resumed by pressing the OPEN button (1) or disconnecting and re
ページ14に含まれる内容の要旨
UV8 OPERATING INSTRUCTIONS External Devices Table 4: Audio Adjustments Power On / Off External peripheral devices, including a game console, Press the /SRC button (6) on the unit (or the button (4) Audio Function Adjustable Range camcorder, navigation unit, iPod, Zune, etc. can be on the remote control) to turn the unit on. The buttons on the connected to this unit via RCA output using the A/V Media EQ User front of the unit light up and the current mode status appears Adapter Cable (incl
ページ15に含まれる内容の要旨
UV8 SETUP MENU To access system settings, press the SETUP button (29) on 3. Select a new value by using the touchscreen or pressing Setting Options Function the >> or << buttons (12, 20) on the remote control or the remote control or touch the button on the screen to the /\ or V buttons (18, 19) on the joystick. • AM Frequency Spacing - 9kHz Korea enter the “SETUP” menu. The “GENERAL” sub-menu • AM Frequency Band - 4. Use the touchscreen or press the >/|| button (16) on the appears highl
ページ16に含まれる内容の要旨
UV8 P.VOL Sub-menu Features Setting Options Function NOTE: Record the password and keep it in a safe place for future reference. The rating for each disc is marked Setting Options Function Sub.W 0 Subwoofer output IN phase on the disc, disc packing, or documentation. If the rating Phase 180 Subwoofer output OUT OF is not available on the disc, the parental lock feature is Source Radio Choose a source for which you phase unavailable. Some discs restrict only portions of the disc would like
ページ17に含まれる内容の要旨
UV8 TUNER OPERATION Tuner TFT Display Switching to Radio Tuner Source Direct Tuning • Touch the top left corner of the screen (the RADIO To enter a radio station directly, touch the button or circle) to view the SOURCE MENU. Touch “Radio”. 2 9 8 17 1 4 5 10 18 3 press the GOTO button (19) on the remote control to display • Press the SRC button (6) on the front panel or remote the direct entry menu. control (8) to switch to the AM/FM or RADIO source. FM-1 P1 87.5 MHz Selecting FM/AM Band S
ページ18に含まれる内容の要旨
UV8 Recalling a Station 1. Select a band (if needed). 2. Touch an on-screen preset button (6) to select the corresponding stored station. P1 87.5 MHz P2 90.1 MHz P3 98.1 MHz P4 106.1 MHz P5 107.9 MHz P6 102.9 MHz Auto Store (AS) To select six strong stations and store them in the current band: 1. Select a band (if needed). 2. Press the AS/PS button (3) on the control panel or touch AS (16) on the screen for 2 seconds to activate the Auto Store function. The new stations replace stations alr
ページ19に含まれる内容の要旨
UV8 DVD/VCD VIDEO OPERATION • VCD (PBC Off): Repeat Single, Repeat Off Controlling Playback NOTE: When properly installed, DVD video cannot be To access the on-screen controls, touch the bottom 1/3 of the displayed on the main TFT screen unless the parking NOTE: For VCD play, the repeat function is not available screen while a DVD is playing. Touch the 1/2 button to view a brake is applied. If you attempt to play a DVD while the if PBC is on. vehicle is moving, the TFT screen displays “PAR
ページ20に含まれる内容の要旨
UV8 • For DVD mode, you can choose Time or Title/ Touch Screen Direct Entry PBC - Play Back Control (VCD Only) Chapter search. To select a chapter/track directly, touch the button on For VCDs with play back functionality, play back control screen control to display the direct entry menu. (PBC) provides additional controls for VCD playback. DVD Search Press the MENU button (1) on the remote control to toggle Time – Go to specific the PBC function “On”/”Off”. Once PBC is on, playback starts t
