ページ1に含まれる内容の要旨
CLOSE PIC WIDE TILT
Multimedia Receiver
VM9313
Installation and Operation Manual
Manual de Instruccionnes de
Instalación y Operación
Instructions d'installation et d'opération
160
WATTS
VM9313
DISP
A / V
INPUT
Watts Peak
Vatios el Máximo
Watts Maximum
40W x 4
160
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
VM9313 CONTENTS TABLE DES MATIÈRES Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s Merci d'avoir choisi un produit Jensen. Nous espérons que vous allez trouver les instructions manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to dans ce guide de propriétaire claires et faciles à suivre. Prenez quelques minutes à le use all the features of your new Jensen VM9313 Mobile Multimedia Receiver for maximu
ページ4に含まれる内容の要旨
VM9313 ii
ページ5に含まれる内容の要旨
VM9313 INTRODUCTION Congratulations on your purchase of the Jensen VM9313 • Screen Tilt / Angle Adjustment become active. While the camera is not installed, the Mobile Multimedia Receiver. • Heat Management System – Forced Air Cooling to keep CAMERA option appears gray, indicating the function is the chip sets operating at nominal temperatures not available. It’s a good idea to read all of the instructions before beginning • Satellite Radio Tuner the installation. We recommend having your Je
ページ6に含まれる内容の要旨
VM9313 CONTROLS AND INDICATORS Button Operation 4 3 2 1 1. TILT/ >>| With the TFT screen open, press to activate the tilt function. Turn the AUDIO control (5) to make adjustments while the red tilt icon is flashing. With the TFT screen closed: • DVD Mode: Press once to enter the next chapter or track. • TUNER Mode: Press once to auto-search the next PIC CLOSE WIDE TILT Multimedia Receiver available radio station. • MENU Mode: Press once to move the cursor to the right. 2. WIDE/ |<< Wi
ページ7に含まれる内容の要旨
VM9313 CONTROLS AND INDICATORS 6. /SRC 4 3 2 1 Press to turn the unit on. Press and hold to turn off. Press to select playing mode. 7. LCD Display 8. DISP Press to cycle through information available on the LCD screen. CLOSE PIC WIDE TILT NOTE: The VM9313 features Softmute, which will allow Multimedia Receiver the volume to increase gradually when the MUTE function is deactivated. 9. IR Remote Control Receiver 10. USB Connector Insert compatible USB device for playback of multimedia files th
ページ8に含まれる内容の要旨
VM9313 REMOTE CONTROL 8 3 35 4 iPod 9 5 MUSICPHOTO VIDEO 16 13 23 1 15 2 30 14 28 31 17 18 11 19 32 22 12 24 21 10 25 20 27 26 29 6 34 33 7 NOTE: Your remote control may differ slightly from the one pictured here. The above diagram is for illustrative purposes only. 4
ページ9に含まれる内容の要旨
VM9313 Table 1: Remote Control Functions Button Function Name Ref# DVD VCD TUNER CD/MP3/USB SATELLITE iPod MENU 1 Enters the main menu of the Turns on/off PBC when play- Displays diagnostics screen Selects Photo mode disc ing VCD TITLE 2 Enters the title menu of the Plays first ten seconds of Selects Music mode disc each chapter/title MUTE 3 Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off a
ページ10に含まれる内容の要旨
VM9313 Table 1: Remote Control Functions Button Function Name Ref# DVD VCD TUNER CD/MP3/USB SATELLITE iPod ZOOM 23 Zooms in/out on an image Zooms in/out on an image PIC 24 Displays set-up parameters Displays set-up parameters OPEN/ 25 Opens/closes the TFT moni- Opens/closes the TFT moni- Opens/closes the TFT moni- Opens/closes the TFT moni- Opens/closes the TFT monitor Opens/Closes the TFT monitor CLOSE tor tor tor tor 26 Decreases monitor tilt angle Decreases monitor tilt angle Decreases monito
ページ11に含まれる内容の要旨
VM9313 USING THE TFT MONITOR Open/Close TFT Monitor Aspect Ratio Parking Brake Inhibit Open TFT Monitor Press the WIDE button (28) on the remote control or WIDE When the pink "Parking" wire is connected to the vehicle button (2) on the monitor to adjust the aspect ratio as follows: Press the OPEN button (4) on the front panel or press the Parking Brake circuit, the front TFT monitor will display video ( ) button (25) on the remote control to activate the when the Parking Brake is engaged. (W
ページ12に含まれる内容の要旨
VM9313 OPERATING INSTRUCTIONS auxiliary device connected to the A/V INPUT on the front of 8. ** Select Power On / Off 9. Band the radio. You cannot directly control external devices Press the /SRC button (6) on the unit (or the button (4) connected to the A/V INPUT. ** If additional steering wheel control buttons are available on on the remote control) to turn the unit on. The buttons on the the vehicle, function 7 / 8 may be assigned the "Select" Selecting a Source While Navigating front
ページ13に含まれる内容の要旨
VM9313 control to adjust the selected feature to the desired setting. Table 4: Audio Adjustments Audio Function Adjustable Range EQ User Acoustic Urban Rave Latin Dance Hip Hop Rock BASS -14 to +14 MID -14 to +14 TREB -14 to +14 SUB -14 to 0 BAL–FAD Grid NOTE: The EQ mode will automatically change to “USER” when individual audio functions are adjusted. The Audio menu will automatically exit after a few seconds of inactivity. To exit quickly, touch the top left corner of the screen or press a
ページ14に含まれる内容の要旨
VM9313 SETUP MENU To access system settings, press the SETUP button (31) on 3. Select a new value by using the touchscreen or pressing Setting Options Function the >> or << buttons (14, 22) on the remote control. the remote control or touch the button on the screen to 4. Use the touchscreen or press the >/|| button (18) on the OSD English On Screen Display appears in enter the “SETUP” menu. The “GENERAL” sub-menu English. remote control to confirm setup. appears highlighted in blue. Gener
ページ15に含まれる内容の要旨
VM9313 Bluetooth Sub-menu Features To reset the password, access the “RATING” menu and enter P.VOL Sub-menu Features the current password. Once the correct password is entered, Setting Options Function Setting Options Function you can access the “Password” field and enter a new one. Bluetooth Off Disable Bluetooth function. Source Radio Choose a source for which you NOTE: Record the password and keep it in a safe place would like to increase the rela- On Enable Bluetooth function. Disc for fut
ページ16に含まれる内容の要旨
VM9313 TS Cal (Screen Calibration) To access the “Screen Calibration” function from the SETUP menu, select the “TS CAL” option. After entering calibration mode, a crosshair appears in a corner quadrant of the screen. To begin calibration, press and hold the crosshair for one second until it moves to the next quadrant. Continue for each quadrant until the calibration is completed. Demo Sub-Menu Features You can stop/run demonstration mode or turn Demo Auto Run on/off by choosing the “Demo”
ページ17に含まれる内容の要旨
VM9313 TUNER OPERATION 5. Tuning mode indicator About HD Radio™ Technology 6. Preset radio stations: Touch to recall preset stations NOTE: The BAND button on the unit only works when the HD Radio technology allows CD-quality digital broadcasting TFT is closed. 7. Program Information: Title, Artist, Type of your local AM and FM radio stations. HD Radio broadcasts NOTE: The amount of information displayed when can include multiple channels on the same frequency, which receiving an HD Radio s
ページ18に含まれる内容の要旨
VM9313 Direct Tuning 2. Touch the on-screen MEM button (17) to open the NOTE: The amount of information displayed when preset screen. To enter a radio station directly, touch the button or receiving an HD Radio signal is dependent upon what is press the GOTO button (21) on the remote control to display being broadcast. Some stations broadcast their call the direct entry menu. letters (name), the artist's name, song title, and category Preset: _ _ of music. 1 2 3 FM:___._MHz PTY Search Exi
ページ19に含まれる内容の要旨
VM9313 SATELLITE RADIO OPERATION 18. Touch this area to view the SOURCE MENU and select 2. Touch an on-screen preset button to select the ® a new playback source corresponding stored station. Listeners can subscribe to XM Radio on the Web by visiting www.xmradio.com, or by calling (800) 967-2346. 19. MEM: View screen used to enter current channel into Direct Tuning Customers should have their Radio ID ready (see preset memory “Displaying the Identification (ID) Code”). Customers can To ente
ページ20に含まれる内容の要旨
VM9313 01:02 SAT1 CH001 S SA AT T XMPreview Preview E Q 000RadioID 001XMPreview CH 004The40s 005The50s CG 006The60s CAT 007The70s SCN MEM Title:www.xmradio.com • While in Search Mode, to switch between Channel and Category search modes, press the CH or CAT buttons in the touch screen. • Use the scroll bar and arrows on the touch screen to view the next/previous page of stations. Each page contains six channels to select from. • Press the on-screen SCN button to preview each of the 6 channe
