ページ1に含まれる内容の要旨
Contents
Before Using Your DVD Receiver
DVD Receiver
Getting Started
DSR-7.3
Instruction Manual
Setup
Basic Operation
Thank you for purchasing the Integra DVD
Advanced Operation
Receiver.
Please read this manual thoroughly before
making connections and turning on the
power.
Following the instructions in this manual will
enable you to obtain optimum performance
and listening enjoyment from your new DVD
Receiver.
Please retain this manual for future reference.
Other
E
ページ2に含まれる内容の要旨
WARNING: WARNING AVIS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE DO NOT OPEN NE PAS OUVRIR DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated CAUTION: “dangerous voltage” within the product’s enclosure that may be of TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT sufficient magnitude to constitute a risk of
ページ3に含まれる内容の要旨
21. Replacement Parts – When replacement parts are FIGURE 1: required, be sure the service technician has used EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL replacement parts specified by the manufacturer or have ELECTRICAL CODE, ANSI/NFPA 70 the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. ANTENNA 22. Safety Check – Upon completion of any service or LEAD IN WIRE repairs to the appliance, ask the service technician to
ページ4に含まれる内容の要旨
Precautions 7. Location of the unit DANGER: • Place the unit in a well-ventilated location. VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND Take special care to provide plenty of ventilation on all sides of INTERLOCK FAILED OR DEFEATED. DO NOT STARE INTO the unit especially when it is placed in an audio rack. If ventilation BEAM. is blocked, the unit may overheat and malfunction. • Do not expose the unit to direct sunlight or heating units as the CAUTION: unit's internal temperature may rise
ページ5に含まれる内容の要旨
Table of Contents Important Safeguards/Precautions/Table of Contents .................................... 2/3/5 Getting Started Features ................................................................................................................ 6 Supplied Accessories ............................................................................................ 7 Notes on Discs ...................................................................................................... 8 Index to Par
ページ6に含まれる内容の要旨
Features * “DTS” and “DTS Digital Surround” are trademarks of Receiver Features Digital Theater Systems, Inc. ** Manufactured under license from Dolby Laboratories. 25 watts per channel into 6 ohms (FTC) “Dolby”, “Pro Logic” and the double-D symbol are 20 watts per channel into 6 ohms (DIN) trademarks of Dolby Laboratories. Confidential 30 watts per channel into 6 ohms (EIAJ) Unpublished Works. ©1992-1997 Dolby Laboratories. All rights reserved. 96 kHz/24-Bit DAC System *** “Theater-Dimensional”
ページ7に含まれる内容の要旨
Supplied Accessories Make sure your box contains everything listed below. If any pieces are missing, contact your nearest Integra/Onkyo dealer. The number of accessories is indicated in brackets. Remote controller (RC-507M) [1] Speaker Label [1] 1 2 3 Speaker Cable Batteries (size AA/R6/UM3) [2] AM loop antenna [1] FM antenna [1] Power cord [1] Audio/video S video connection connection cable [1] cable [1] The cable with the Cable which sends S- yellow plug is for video. video images. The cable w
ページ8に含まれる内容の要旨
Notes on Discs This section shows you how to handle, clean, and store discs. Playable Discs About VIDEO CDs This DVD Receiver supports VIDEO CDs equipped with the This DVD Receiver can playback the following discs. PBC (Version 2.0) function. (PBC is the abbreviation of Playback Control.) Disc mark You can enjoy two playback variations depending on the type of disc. • VIDEO CD not equipped with PBC function (Version 1.1) DVD videos Sound and movies can be played on this DVD Receiver in the same
ページ9に含まれる内容の要旨
Handling Discs Differences in Disc Composition • Do not touch the playback side of the disc. DVD All discs are divided up into smaller, more manageable sections so that you can find specific content more easily. DVDs are divided into one or more titles. Each title may be further divided into several chapters. Occassionally, a chapter Playback side may contain index points, effectively dividing the chapter up into several parts, too. • Do not attach paper or tape to discs. Title 1 Title 2 Chapt
ページ10に含まれる内容の要旨
Index to Parts and Controls For operational instructions, refer to the page indicated in brackets. Front panel 12345 6 7 89 0-=~! @$# % ^ 1 Standby/On button, On, Standby indicators [24] ~ Play button [29, 33, 34] When Standby/On button is pressed to On, the DVD Receiver turns Press to start or resume playback. on. The Standby indicator turns off, and the On indicator and the display lights up. Pressing the button again returns the DVD !4/¢, Tuning/Preset 2/3 buttons [33, 35, 37] Receiver to th
ページ11に含まれる内容の要旨
Display 13 2 4 56 7 890- =~ 1 Multipurpose display 9 LAST indicator [62] Lights up when a disc which contains a memorized Last Memory point is loaded. 2 TITLE, CHP indicators [52, 56, 64, 65] Indicate display mode of the current title or chapter of DVD. 0 REMAIN indicator [64, 65] Lights up when time remaining is displayed. 3 Inserted disc indicator [29] Indicates the type of current disc that is loaded. - MUTING indicator [40] Flashes when the mute function is active. 4£, 8 indicators [29] Lig
ページ12に含まれる内容の要旨
k c o l C R u V T e n 2 t t e h u g i L y r M a l n e p r p y s o b a i t d T D n c a e t e S l d d e n Index to Parts and Controls Remote controller Explanations on this page are for controlling the DVD receiver. The 1 Send indicator [15, 78] supplied remote controller is a useful tool to help you operate your Lights red when sending a signal. home theater. To operate other components, see “Operating the Integra/Onkyo 2 Open/Close button [29] Cassette Tape Deck/MD Recorder/CD Recorder with the
ページ13に含まれる内容の要旨
% Audio button [61] º A-B button [54] Press repeatedly to select one of the audio languages programmed Press at the beginning and end of the section you want to repeat or on a DVD. to mark a location you want to return to. For Video CD and MP3, each press changes the audio output as follows. – button [29, 32, 55] → Stereo → 1/L(Left) → 2/R(Right) Press to pause disc playback. Press again to resume playback. ^ Angle button [63] ≠ Timer button [41-45] Some DVDs are recorded with various camer
ページ14に含まれる内容の要旨
Index to Parts and Controls Rear panel 12 3 456 7 8 L SURROUND ANTENNA FRONT SPEAKERS SPEAKERS PREOUT IR R L R CENTER L AC INLET AUDIO REMOTE IN ANTENNA CONTROL R AM FM 75 IN OUT IN SUB WOOFER TV/LINE MD/CDR/TAPE DIGITAL VIDEO OUTPUT YPB PR OPTICAL OUT IN S VIDEO VIDEO COMPONENT 90 Shapes of jacks vary depending on the area in which it was 6 ANTENNA terminals [22, 23] purchased. These terminals are for connecting the FM antenna and AM antenna. 1 SUB WOOFER PRE OUT jack [17, 18] This terminal is
ページ15に含まれる内容の要旨
k c o l C R u V V V V V T T T T T e n 2 2 t t t e h h u g g i i L L y r M a n l e e e e e p r r p p p p p y y s o o b b a a a a a i t t d d T T T T T D n n c c a a e e t t e e e e e S S l l d d d d d d d e e n n Preparing the Remote Controller Inserting the Batteries Switching the remote controller function modes 1 Detach the battery cover. Some buttons on the remote controller have two or more 2 Insert the two size AA/R6/UM3 batteries. functions. To set the functionality of these buttons, press
ページ16に含まれる内容の要旨
Connecting to a TV Before connecting Incomplete • Connect the plugs securely. • Note that one audio/video connection • Refer also to the instruction manual of the TV. cable and one S video connection cable • When you connect the DVD Receiver to the TV, be sure to turn are supplied. off the power and unplug both the units from the socket before making any connections. • Connect the DVD Receiver to the TV directly. If you connect the Insert completely DVD Receiver to a VCR, TV/VCR combination, or
ページ17に含まれる内容の要旨
Connecting Speakers Before connecting • Refer also to the instruction manuals of the speakers. • This DVD Receiver is designed to reproduce optimum sound quality when speakers with the impedances specified below are connected. Please check the following information and choose speakers with appropriate impedances for the connections. Front speakers: 6 ohms min. per speaker Center speaker: 6 ohms min. Surround Speakers : 6 ohms min. per speaker • To prevent damage to circuits, never short- Connect
ページ18に含まれる内容の要旨
Positioning Speakers Standard speaker placement of the speakers system Speaker placement plays an important role in the reproduction of Surround sound. The placement of the speakers varies depending on the size of the room and the wall coverings used in the room. The illustration below shows an example of a layout for standard speaker placement. Refer to this example when you position the speakers in order to experience the best of Surround sound. For ideal Surround effects, all speakers shoul
ページ19に含まれる内容の要旨
Connecting to Audio/Video Equipment Before connecting • Connect the plugs securely. Incomplete • Refer also to the instruction manual of each component to be connected. • When you connect the DVD Receiver to audio/video equipment, be sure to turn off the power and unplug all the units from the socket before making any connections. Insert completely • About the DIGITAL OPTICAL OUT/IN connectors Remove the protective caps before making connections. When not in use, be sure to replace them. • Analo
ページ20に含まれる内容の要旨
z Connection for the Integra/Onkyo Cassette Tape Deck, CD Recorder or MD Recorder The z terminal on the DVD Receiver is for connecting Power on/ready function Integra/Onkyo MD recorder, CD recorder or Cassette tape When the DVD Receiver is in the standby state, if an z-connected component is turned on, then the DVD Receiver also turns on and deck equipped with the same z terminal. When an the input source selected at this unit automatically switches to that Integra/Onkyo component is z -connecte
