Land Pride 4220STの取扱説明書

ページ1に含まれる内容の要旨

Head Rest With Mounting Post
Assembly Instructions
Manual No. 701-170M
For 4220ST and 4420ST Trekers
Before You Start General Information
These assembly instructions apply to the following Back
When you see this symbol, the subsequent
Screen and Head Rest accessories listed below:
instructions and warnings are serious - follow
!
701-169A HEAD REST WITH MOUNTING POST KIT
without exception. Your life and the lives of
others depend on it!
Tools required:
• Safety Glasses
IMPORTANT: Before you begin

ページ2に含まれる内容の要旨

Land Pride Assembly Instructions 3. Insert head rest mounting post (#1) into the bottom Head Rest Assembly joint halves and then into the top joint halves. Refer to Figure 1: 4. Adjust joint halves to center the head rest behind the 1. Behind the driver, attach bottom joint halves (#2) to driver’s head and tighten nylock nuts to 8 ft-lbs. the 4-Post Accessory Bar lower cross member with 1/4"-20 x 2" GR5 hex head cap screw (#3), 2- flat 5. Locate a desirable height that will protect the driver’s