ページ1に含まれる内容の要旨
Diamond View
DV180
Colour LCD Monitor
18.1” (45.9 cm) LCD Panel Size
User’s Manual
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
TABLE OF CONTENTS 1. SAFETY INSTRUCTIONS AND MAINTENANCE .................................... 3 2. INTRODUCTION............................................................................................. 4 UNPACKING THE MONITOR ............................................................................. 4 FEATURES ....................................................................................................... 4 3. INSTALLING THE MONITOR ...........................................
ページ4に含まれる内容の要旨
Copyright Copyright ©1999 Mitsubishi Electric Australia Pty. Ltd. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Mitsubishi Electric Australia Pty. Ltd. Disclaimer Mitsubishi Electric Australia Pty. Ltd. makes no repres
ページ5に含まれる内容の要旨
Safety Instructions and Maintenance 1 Safety Instructions The power supply cord connects the monitor to the electrical mains power supply. The socket outlet shall be near the monitor and shall be easily accessible. This monitor should be operated from the type of power indicated on the rating label on the base of the monitor. If you are not sure of the type of power available, consult your dealer or local Power Company. Unplug the monitor from the wall outlet before cleaning. Do not
ページ6に含まれる内容の要旨
Introduction 2 Unpacking the Monitor Check following items. If they are missing or damaged, consult your place of purchase immediately. Diamond View DV180 TFT LCD monitor with signal cable and built-in USB hub Floppy diskette containing Windows 95, 98 and 2000 drivers, and the test pattern display program for Automatic setup of the display (Auto.exe). Mitsubishi Australia DV180 User’s Manual Warranty Card Power cord Audio input cable Microphone cable USB cable Locat
ページ7に含まれる内容の要旨
High Quality Ratiometric Expansion With any kind of resolution, your DV180 monitor can always display a full-screen image. 16 Million Colour (True Colour) Display With dithering support, the DV180 monitor enhances the visual effect and offers you a better resolution of image quality. High Brightness and Contrast 2 Brightness of up to 235 cd/m .(typical) is available. Compared with the 200:1 contrast ratio of most other LCD monitors, the DV180 offers a contrast ratio of 300:1 for i
ページ8に含まれる内容の要旨
Installing the Monitor 3 The DV180 monitor is equipped with an auto-sensing power supply that will operate within the voltage range of 100 to 240 Volts AC, at 50~60 Hz. 1. Make sure that the system power is turned off. 2. Plug the signal cable into the VGA signal connector at the rear of the PC. 3. Plug the end of the power cord to the monitor. 4. Connect the other end of power cord into the wall socket or other power source. 5. Turn the monitor on and then turn the c
ページ9に含まれる内容の要旨
Connecting the Microphone After connecting the microphone to the computer’s sound card, you can use it for video conferencing, to record or edit audio files and for many other applications. 1. Turn the computer system off. 2. Plug one end of audio cable into the LINE IN port at the rear of the computer and the other end to the microphone connector at the rear of the monitor. 3. Turn the monitor and the computer on. To record using the microphone, you don't need to be close to the
ページ10に含まれる内容の要旨
To adjust the audio volume, use the volume control at the right side of your monitor. Connecting Headphones Plug your headphones into the headphone connector at the rear of monitor to avoid disturbing others while still being able to hear audio through the monitor. 8
ページ11に含まれる内容の要旨
Connecting USB Devices With the Diamond View DV180’s built-in hub, you can easily connect up to 4 USB devices to the computer via the hub. To connect the USB hub to the PC: 1. Turn the system power off. 2. Connect the USB cable to the computer and to the upstream USB port at the rear of monitor. 3. Connect the USB cables of any other peripherals to the downstream USB connectors at the rear of the monitor. 4. Turn the monitor and the computer on. 9
ページ12に含まれる内容の要旨
Setting up and Using the DV180 4 The Control Panel Adjust. Wheel Auto Power Switch: Turns the monitor on or off. AutoKey: Automatically adjusts the display’s colour temperature, Horizontal Position, Vertical Position, Clock Phase and Pixel Clock. Adj. (Adjust) Wheel: Rotate and press this to access the On Screen Display (OSD). Audio Volume Control: (at the rear of the monitor) rotates to adjust the audio volume Using Your Monitor for the First Time When the DV180 monitor is first
ページ13に含まれる内容の要旨
Automatic Image Adjustment The easiest way to set up the monitor is to display the adjustment test pattern and use the monitor’s AUTO button. The display must be adjusted manually if the test pattern is not available. Please refer to Manual Display Setup on page 18 for details. The display must be adjusted: • When the monitor is first installed • If the resolution or refresh rate is changed • If the PC’s graphics card is changed • If the PC is changed • After using the Recall function
ページ14に含まれる内容の要旨
Using the On Screen Display The DV180 monitor’s On Screen Display (OSD) allows the brightness, contrast and other image parameters to be easily adjusted for optimum performance. Press the Adjustment (Adj.) wheel once to open the OSD. Menu items are selected by pressing the wheel in once. Turn the wheel to highlight the required menu item and select it to change its setting. Once an item has been selected, turning the wheel downward increases the value of the selected item. Turning it upw
ページ15に含まれる内容の要旨
The On Screen Display The On Screen Display (OSD) allows you to adjust the image displayed on the monitor for optimum image clarity and comfortable viewing. A description of the OSD’s menus and their use follows: 1. The Luminance Menu 1. Press the Adjustment wheel to display the main menu. The first function is Luminance. Press the wheel a second time to adjust brightness and contrast. 2. Turn the wheel to highlight the function that is to be adjusted and press the wheel to select it.
ページ16に含まれる内容の要旨
2. The Geometry Menu OSD Icon Description Hor. (horizontal) Position Adjusts the horizontal position of the display. Ver. (vertical) Position Adjusts the vertical position of the display. Phase Adjusts the phase of pixel clock. It can improve the focus and stability of your screen as well. Pixel Clock Adjusts the frequency of the pixel. With this function, you can enlarge or reduce the width of your screen. Return Return to last OSD.
ページ17に含まれる内容の要旨
3. Colour Adjustment Turn the Adjustment wheel to select the colour that you wish to change. Press the wheel again and turn it to adjust the level of that colour. If you want to recall a factory preset colour, select and press the wheel. OSD Icon Description Factory Default Recall the preset colour settings. Recall R Red level 75 G Green level 75 B Blue level 75 Return Return to last OSD. 4. Recall Factory Settings Select to recall the factory se
ページ18に含まれる内容の要旨
If you are using a signal with a timing that is not listed on the preset timing table, "Non Preset Mode" will be shown on this page. 5. Miscellaneous OSD Position OSD Icon Description Hor. (horizontal) Position adjusts horizontal position of the OSD. Ver. (vertical) Position adjusts vertical position of the OSD. Zoom OSD Icon Description 16
ページ19に含まれる内容の要旨
ON Enlarges the image to full screen size. If your image already takes up the full screen, this function has no affect. OFF Reduces the screen size. Language Selection De: Deutsche En: English Es: Español Fr: Français It: Italiano Ja: Japanese Return to last OSD. Return 6. Return Return : exits the main menu. 17
ページ20に含まれる内容の要旨
Manual Display Setup The monitor’s display can be manually set up using the Geometry menu. For best performance set the graphics produced by the computer to a resolution of 1280 x 1024 pixels. A refresh rate of 75 Hz is also recommended. The image adjustment is easiest if the test pattern is used. Alternatively, an image with fine text can be used, preferably with black text on a white background. For example, Apple Macintosh users can display the contents of the System folder using the L
