ページ1に含まれる内容の要旨
PS4652/PS5552/PS6552
USER’S GUIDE
www.planar.com
ページ2に含まれる内容の要旨
The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be reproduced, translated to another language or stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission. Windows is a registered trademark of Microsoft, Inc. Other brands or product na
ページ3に含まれる内容の要旨
Table of Contents 1 Table of Contents Safety warnings and precautions ......................................................... 3 Important safety instructions ............................................................... 4 Notes on the LCD panel of this display ........................................................................... 4 Safety notice for remote control ....................................................................................... 5 Battery safety notice ............
ページ4に含まれる内容の要旨
2 Table of Contents OSD menu overview ..............................................................................................................31 Operations in the OSD menu..............................................................................................33 Picture menu ...........................................................................................................................34 Sound menu ............................................................................
ページ5に含まれる内容の要旨
Safety warnings and precautions 3 Safety warnings and precautions THIS EQUIPMENT MUST BE GROUNDED To ensure safe operation, the three-pin plug must be inserted only into a standard three-pin power outlet which is effectively grounded through normal household wiring. Extension cords used with the equipment must have three cores and be The lightning flash with arrowhead symbol, correctly wired to provide connection to within an equilateral triangle, is intended to the ground. Wrongly wire
ページ6に含まれる内容の要旨
4 Important safety instructions Important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not def
ページ7に含まれる内容の要旨
Important safety instructions 5 Safety notice for remote control • Do not put the remote control in the direct heat, humidity, and avoid fire. • Do not drop the remote control. • Do not expose the remote control to water or moisture. Failure to do so could result in malfunction. • Confirm there is no object between the remote control and the remote sensor of the product. • When the remote control will not be used for an extended period, remove the batteries. Battery safety notice The use of the
ページ8に含まれる内容の要旨
6 Package contents Package contents Open the sales package and check the contents. If any item is missing or damaged, please contact your dealer immediately. LCD display Power cord D-Sub (15-pin) cable IR extender cable Remote control AAA batteries Quick start guide Notes: • The type of power cord supplied may differ from that illustrated depending on your region of purchase. • Before discarding the package, check that you haven't left any accessories inside the box. • Dispose of packaging mate
ページ9に含まれる内容の要旨
Setting up the display 7 Setting up the display Mounting the display You can install the display on a vertical surface with a suitable wall mounting bracket or on a horizontal surface with a table stand. Please pay attention to the following notes during installation: • This display should be installed by at least two adult persons. Attempting to install this display by only one person may result in danger and injuries. • Refer the installation to qualified technicians. Improper installation
ページ10に含まれる内容の要旨
8 Parts of the display and their functions Parts of the display and their functions Rear panel 1 PS4652 PS6552 2 3 4 1 PS5552 4 5 6 1 2 3 4 4 5 6 No. Name Description • Receives command signals from the remote control. • Detects ambient lighting conditions around the display and adjusts screen brightness automatically when the Ambient Light Sensor function is activated. Remote control sensor / 1 • Indicates the operating status of the display: Ambient light sensor / - Lights up green when
ページ11に含まれる内容の要旨
USB USB HDMI DVI-D Mini B Type A Parts of the display and their functions 9 Input/output terminals PS4652 PS5552 3 3 PS6552 16 15 14 13 12 11 3 100-240V~50-60H AC SWITCH z 1.5A ON/OFF IN 10 9 8 7 6 5 4 2 1 No. Name Description AC SWITCH ON/OFF Turns on or off the main power. 1 AC power input Connects to a power outlet via the supplied power cord. 2 Power cable router Assists in routing the power cable to avoid gravitational pull downward. 3 clip AUDIO OUT Outputs audio signals to an exte
ページ12に含まれる内容の要旨
10 Parts of the display and their functions USB Type A Connects to a USB flash drive. 14 USB Mini B Connects to a computer for saving media content to internal memory. 15 16 RJ45 Connects to the RJ-45 port on your Ethernet or router.
ページ13に含まれる内容の要旨
Parts of the display and their functions 11 6 Remote control INFO Shows the current input source and resolution. 7 1 Numeric (1-9)/Input source buttons • Performs as numeric buttons when the OSD menu is 2 6 on. • Performs as input source buttons when the OSD menu is off. Note: 7 • The HDMI-2, AV and SDI functions are not available with this display. 8 MENU Opens or closes the OSD menu. 3 8 9 9 Numeric button (0)/MUTE • Performs as a numeric button when the OSD menu is 4 on. 10 • Turns on or
ページ14に含まれる内容の要旨
12 Parts of the display and their functions Using the remote control Installing remote control batteries 1. Open the remote control battery compartment cover. 2. Insert the supplied batteries ensuring that the positive and negative marked battery terminals match the (+) and (-) marks in the battery compartment. Note: • The supplied batteries are provided for your convenience so that you can operate the display straight away. You should replace them as soon as possible. 3. Refit the battery c
ページ15に含まれる内容の要旨
Connection 13 Connection Connecting audio/video signals Pay attention to the following notes when you connect cables: • Please turn off all devices. • Familiarize yourself with the audio/video ports on the display and the devices you want to use. Be aware that incorrect connections may adversely affect picture quality. • Do not remove cables from the ports by pulling the cable itself. Always grasp and pull the connectors at the end of the cable. • Ensure that all cables are fully inserted and
ページ16に含まれる内容の要旨
14 Connection Connecting the YPbPr component video input 1. Connect the VIDEO IN (YPbPr) jacks on the display to the component output jacks on an A/V device (such as a VCR or DVD player) using a component video cable. 2. Connect the A/V device’s audio output jacks to the AUDIO IN jack on the display using a suitable audio cable. To select an appropriate audio source, see "Audio Source" on page 35 for details. 3. To view video image from this input, press the YPbPr button on the remote control
ページ17に含まれる内容の要旨
Connection 15 Connecting the DVI-D digital input 1. Connect the DVI-D jack on the display to the DVI-D output jack on a computer using a DVI-D cable. 2. If needed, connect the computer’s audio output jack to the AUDIO IN jack on the display using a suitable audio cable. To select an appropriate audio source, see "Audio Source" on page 35 for details. 3. To view video image from this input, press the DVI button on the remote control, or select DVI from the source selection bar. 100-240V~50-6
ページ18に含まれる内容の要旨
16 Connection Connecting the HDMI digital input 1. Connect the HDMI jack on the display to the HDMI output jack on a computer using an HDMI cable or a DVI-D to HDMI conversion cable. 2. If needed, connect the computer’s audio output jack to the AUDIO IN jack on the display using a suitable audio cable. To select an appropriate audio source, see "Audio Source" on page 35 for details. 3. To view video image from this input, press the HDMI-1 button on the remote control, or select HDMI from th
ページ19に含まれる内容の要旨
Connection 17 Connecting the DisplayPort (DP) digital input 1. Connect the DP jack on the display to the DisplayPort output jack on a computer using a Dis- playPort cable. 2. To view video image from this input, press the DP button on the remote control, or select DisplayPort from the source selection bar. USB USB HDMI DVI-D Mini B Type A DisplayPort cable Computer Note: • The cables are not supplied and should be purchased separately.
ページ20に含まれる内容の要旨
18 Connection Connecting multiple displays You can connect multiple displays serially (daisy chain connection) to a computer for management. The number of displays you can connect serially depends on the resolution of the input signal you use. The first display AC SWITCH 100-240V~50-60Hz 1.5A ON/OFF IN RS-232C cable D-Sub (15-pin) cable 100-240V~50-60Hz AC SWITCH ON/OFF 1.5A IN Additional display Notes: • This RS-232C daisy chain connection requires an RS-232C port equipped computer.
