ページ1に含まれる内容の要旨
PXL2430MW
LED Touch Monitor
触控屏液晶显示器
USER'S GUIDE
使用手册
www.planar.com
ページ2に含まれる内容の要旨
English Content Operation Instructions...................................................................................................................................................1 Unpacking Instructions .................................................................................................................................................2 Safety Precautions........................................................................................................................
ページ3に含まれる内容の要旨
English Operation Instructions Thank you for purchasing the PXL2430MW multi-touch LED monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This has been tested and found compliant with the limits for a Class B digital device, LED Monitor pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation. This
ページ4に含まれる内容の要旨
English Unpacking Instructions Move the LED Monitor out of the package and take off the plastic bag and Polystyrene Foam. Pull the base from Parallel versus Panel to Vertical. Adjust the Panel between 0° leaning forward and 20° leaning backward. Safety Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. Do: Turn off the product before cleaning. Touch screen surface may be cleaned using a soft cl
ページ5に含まれる内容の要旨
English Front View of the Product ① ② ③ ④ ⑤⑥⑦ ① Touch Pen Slot OSD Turn On/ Off ② ③ Volume Adjust/ Scroll Down/ Adjust Decrease Preset Mode/ Scroll UP/ Adjust Increase ④ ⑤ Input select/ Confirm Selection LED Indicator ⑥ ⑦ Power On/ Off 3
ページ6に含まれる内容の要旨
English Rear View of the Product ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ Power Input ⑧ ⑨ USB - Type A to B Headphone Jack ⑩ ⑪ Audio Input HDMI input (HDMI 19 pin) ⑫ ⑬ DVI Input (DVI 24 pin) VGA Input (D-Sub 15 pin) ⑭ 4
ページ7に含まれる内容の要旨
English Quick Installation Connect either VGA, DVI or HDMI Video Source from the monitor to the computer. Make 1. sure both monitor and computer are powered OFF. 2. Connect the audio cable from audio output of computer to the audio input of the monitor. 3. Connect the USB cable from the computer to the monitor. 4. Connect power cord to a properly grounded AC outlet, and then to the monitor. 5. Power-ON computer and then POWER-ON the monitor. 6. Set the timing mode on your computer. Rec
ページ8に含まれる内容の要旨
English Basic Operation and Calibration/Reset Instructions Before using the Touchscreen LED Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the Touchscreen LED Monitor on/off: Press POWER button on the front. The power LED indicator light will be blue when the Touchscreen LED Monitor is on. Using the OSD Menu Use OSD menus to adjust settings by using the menu button on the front of the Touchsc
ページ9に含まれる内容の要旨
English Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 10 seconds to lock all 5 buttons. The Touchscreen LED Monitor will show a “Lock Out” message for 3 seconds and the message will disappear automatically. Repeat this step to unlock. PX2430MW Calibration/Reset Instructions: The PX2430MW is available with USB connection. It is Microsoft® Windows® 7 HID (Human Interface Device) compatible
ページ10に含まれる内容の要旨
English Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your Touchscreen LED Monitor. Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Contrast: To adjust the foreground white level of screen image. ▲: increase contrast, ▼: decrease contrast
ページ11に含まれる内容の要旨
English Color Adjust: To select the color for improving brightness and color saturation between 9300K, 6500K, 5400K, and User Color. 9300K: Adds blue to screen image for cooler white. 6500K: Adds red to screen image for warmer white and richer red. 5400K: Adds green to screen image for a darker color. User Color: Individual adjustments for red (R), green (G), blue (B). 1. Press button 2 to select the desired color. 2. Press ▼ or ▲ button to adjust selected color. Information: To displa
ページ12に含まれる内容の要旨
English Setup Menu: To set up Language, OSD Position, OSD Time Out and OSD Background. Language Select: To allow users to choose from available languages. OSD Position: Press ▼ or ▲ button to select between horizontal and vertical OSD Position adjustment. H. Position: To horizontally adjust the OSD position. ▲: move OSD to the right, ▼: move OSD to the left. V. Position: To vertically adjust the OSD position. ▲: move OSD up, ▼: move OSD down. OSD Time Out: To automatically tu
ページ13に含まれる内容の要旨
English Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VESA 1024 x 768 @ 75Hz VESA 1280 x 960 @ 60Hz VESA 1152 x 864 @ 75Hz MAC 1152 x 870 @ 75Hz VESA 1280 x 1024 @ 60Hz VESA 1280 x 1024 @ 75Hz VESA 1440 x 900 @ 60Hz CV
ページ14に含まれる内容の要旨
English Technical Information Panel 23.6” TFT (with LED backlight) Power Management On: 21 Watts (typical), 40 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.2715 x 0.2715 mm Display Color 16.7M Tilt 4° (+3/-3) ~ 40° (+3/-3) Active Display Area 521.28 mm x 293.22 mm Temperature Operating: 0°C ~ +40°C Storage: -20°C ~ + 60°C Compliance FCC-B, CE, UL/cUL, CCC Power Input Voltage
ページ15に含まれる内容の要旨
English Wall-Mount Installation Instructions Wall Mount Arm not included Turn the power OFF then disconnect the cables from the Touchscreen LED Monitor before performing the procedure below. 1. Lay the Touchscreen LED Monitor face down on a soft surface. 2. Remove the two pieces of flake and Hinge Cover. 3. Remove the two screws under the flake. 4. Remove the stand. 5. Follow instructions included with the Wall Mount kit. NOTE 100mmx100mm VESA hole pattern (n=4), M4, pitch =0.7 mm
ページ16に含まれる内容の要旨
English Troubleshooting No power Make sure A/C power cord is securely connected to the power adapter and the power supply Touchscreen LED Monitor is firmly connected to the . Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage. Make sure all signal cables are installed. Power on but no screen image Touchscreen LED Monitor Make sure the video cable supplied with the is tightly secured to the video output port on back of t
ページ17に含まれる内容の要旨
English Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/product_registration.html Cables, Replacement Lamps, Accessories To find cables, replacement lamps and accessories for your Planar projector, LCD monitor, touch screen or other Planar produc
ページ18に含まれる内容の要旨
目录 操作说明 ..............................................................................................................................1 开箱说明 ..............................................................................................................................2 安全预防措施 .......................................................................................................................2 产品前视图............................................................................................
ページ19に含まれる内容の要旨
操作说明 感谢您购买 PXL2430MW多点触控屏液晶显示器。请在安装前认真阅读本指南。 FCC 无线电频率干扰声明 警告:（仅针对有 FCC 证明的型号） 本显示器经测试符合 FCC 规定第 15 部分有关 B 类数字设备的限制条件。这些限制条件是 为提供合理的保护措施，防止在住宅区安装设备时产生有害干扰而制定的。本显示器会产生、 使用和辐射无线电频率能量。如果没有正确安装和使用，可能对无线电通讯造成有害干扰。 然而，并不保证在特殊的安装方式下不产生干扰。如果本显示器确实对无线电或电视接受设 备造成严重干扰，可以通过复位显示器来终止。另外，我们请用户通过以下方法来克服干扰： 重定向或重定位接受天线。 增大显示器和接受设备之间的距离 将本显示器电源线插入另一个插座，使显示器和接收设备位于不同的电路中。 向本地经销商或合格的技术人员咨询。 FCC 警告: 为了保证符合 FCC 规定，用户必须使用接地的电源线和所提供的具有耦合铁磁芯的屏蔽视频 接口电缆。另外，任何未经授权对本显示器进行的改变或更改，都将使用户失去操作本设备 的权力。 注
ページ20に含まれる内容の要旨
开箱说明 从包装箱中取出 显示器，取下塑料袋，然后取下 。 触控屏液晶 保丽龙 将基座从与面板平行的方向推到与其垂直的方向。 显示屏可向前调节 0 度，或者向后调节 40 度。 安全预防措施 请遵照本《使用手册》中建议的所有警告、预防措施和维护，使您的装置的寿命达到昀长。 要： 在清洁之前，关闭产品。 可以使用蘸有柔和商用窗玻璃清洁剂或者水和异丙醇对半的混合物的干净软布，清洁触控 屏表面。 使用蘸有柔和洗涤剂的软布，清洁显示屏外壳。 如果产品长时间不使用，请将电源插头与交流插座断开。 不要： 不要用锋利或坚硬的物体触碰液晶显示屏表面。 清洁时，不要使用擦洗剂、蜡或溶剂。 不要在下述条件下操作产品： o 极热、极冷或极潮湿的环境。 o 易受过多灰尘和污物影响的区域。 o 靠近产生强磁场的任何装置。 o 在直射阳光下。 如果您的 显示器散发烟雾、异常声音或异味，则应立即断开电源线连接，并联 触控屏液晶 络您的服务中心。 不得拆卸您的 显示器壳体后盖。显示器内部含有可对人体造成电击的高电压零 触控屏液晶 件。
