ページ1に含まれる内容の要旨
NAVIGATING THE SOLO ™ LCD SCREEN
2
QUICK REFERENCE GUIDE
NOTE: This guide is meant to be used only as a brief, general
reference. For complete operating instructions, always refer
to the Operator’s Manual.
Turning Concentrator On/Off
NOTE: For this procedure, refer to FIGURE 1.1.
1. To turn the SOLO concentrator on, press and hold the
2
On/Off button until the three warning lights display
and the unit beeps.
2. To turn the SOLO concentrator off, press and hold the
2
On/Off button .
NOTE
ページ2に含まれる内容の要旨
LCD Adjust Screen The LCD Adjust screen allows user to change the brightness and contrast of the screen (FIGURE 1.2). Up/Increase Button Mode/Return/ Down/Decrease Highlight Button Button FIGURE 1.2 LCD Adjust Screen LCD Adjust Screen Navigation NOTE: For this procedure, refer to FIGURE 1.2. 1. Perform one of the following, while the LCD Adjust screen is displayed: A. Tap the Mode/Return/Highlight Button to move the black highlight bar from left to right, or right to left. B. Tap the Up
ページ3に含まれる内容の要旨
2. To save changes made on the LCD Adjust screen: A. Press and hold the Mode/Return/Highlight Button until a different screen appears. Mode & Flow Adjust Screen The Mode & Flow Adjust screen allows user to change the current mode of operation and output flow (FIGURE 1.3). NOTE: To adjust either the mode or flow, the Mode & Flow Adjust screen must be displayed. If the battery level screen is displayed, press the Mode/Return/Highlight , Up/Increase , or Down/Decrease button for approximat
ページ4に含まれる内容の要旨
Adjusting Flow NOTE: For this procedure, refer to FIGURE 1.3. 1. With the Mode & Flow screen displayed, press and hold the Up/Increase Button or Down/Decrease Button until desired setting is achieved. 2. Wait until the Mode & Flow screen flashes three times. Invacare Corporation www.invacare.com USA © 2010 Invacare Corporation. All rights One Invacare Way reserved. Republication, duplication or Elyria, Ohio USA modification in whole or in part is 44036-2125 prohibited without prior writte
